|
| 1 | Supply, fixing, connecting and testing of integral LED street light fitting, 120 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass, individual LEDs with secondary lens optics with IP66 ingress protection, over voltage protection, short circuit protection, open circuit protection, external surge protection, LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm including taking down of old unserviceable light fitting complete all as specified and directed |
| 2 | Supply, fixing, connecting and testing of integral LED street light fitting, 150 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass, individual LEDs with secondary lens optics with IP66 ingress protection, over voltage protection, short circuit protection, open circuit protection, external surge protection, LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm including taking down of old unserviceable light fitting complete all as specified and directed |
| 3 | M&L for supply, fabrication and installation of LED display board (sign board) as per sample, made from ACP sheet, channel and framed steel structure and including logo / letters engraved / embossed as directed, of 34 feet by 07 feet size (approx) having suitable thickness with neon light around boarder with and including necessary excavation, earth work & PCC as required at site for grouting of display / sign board etc. complete all as specified and directed by Engr-in-Charge |
| 4 | M&L for supply, fabrication and installation of LED display board (sign board) as per sample, made from ACP sheet, channel and framed steel structure and including logo / letters engraved / embossed as directed, of 18 feet by 2.2 feet size (approx) having suitable thickness with neon light around boarder with and including necessary excavation, earth work & PCC as required at site for grouting of display / sign board etc. complete all as specified and directed by Engr-in-Charge |
| 5 | Supply and erection of steel tubular swaged pole 410 SP 22, 8.50 m long, swan neck complete with cast iron base plate, finial taper plug, bolts, nuts, and screws as specified type conforming to IS 2713 including with 2 coats of aluminium paint over a coat of red oxide zinc chrome primer on external exposed surfaces and 2 coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole including taking down of old unserviceable pole, complete all as specified and directed. |
| 6 | M & L for GI pipe, light grade, 40mm bore including with all fittings & fixtures, laid in trenches complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, as in foundation of pole complete all as specified &directed. |
| 8 | M&L for PCC type B-1, 1:2:4 using 20 mm graded stone aggregate as in coping of poles, with and including form work complete all as specified & directed. |
| 9 | Supply & Fixing, Laying, jointing, connecting & testing of 10 Sqmm, 4 core cable, XLPE / PVC insulated PVC inner sheathed cable heavy duty 1100 volts grade, solid aluminium conductor, laid in trenches / ducts including taking down of old unserviceable cable complete all as specified and directed. |
| 10 | Supply & Fixing, Laying, jointing, connecting & testing of 16 Sqmm, 4 core cable, XLPE / PVC insulated PVC inner sheathed cable heavy duty 1100 volts grade, stranded aluminium conductor, laid in trenches / ducts including taking down of old unserviceable cable complete all as specified and directed. |
| 11 | Supply & Fixing, Laying, jointing, connecting & testing of 25 Sqmm, 4core cable, XLPE / PVC insulated PVC inner sheathed cable heavy duty 1100 volts grade, stranded aluminium conductor, laid in trenches / ducts including taking down of old unserviceable cable complete all as specified and directed. |
| 12 | M&L for earthing with galvanized steel earth plate electrode of 600mm x 600mmx6mm thick buried directly in ground, (earth pit not less than 2.25m below ground level), with the top edge of the plate not less than 1.5 m below the normal ground level, connected to 4 mm Gl wire and riveted to earth plate, GI earth wire will be protected by using 40mm bore Gl pipe (light grade) from earth plate to equipment and watering pipe 20mm bore (light grade), chamber and coping shall be made in PCC (1:3:6) type C1 using 20mm graded stone aggregate, RCC pit cover 50mm thick in 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way with lifting hook made out of 8mm dia TMT bar duly embedded in RCC cover in lieu of CI pit cover with angle iron frame with and including necessary excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR Part I and as specified including charcoal dust, common salt complete and earth lead connected to earthing test point/main point and testing of earthing complete as specified and directed by Engr-in-Charge |
| 13 | Excavation in trenches for not exc. 1.50 m wide and not exc. 1.50 m depth and getting out in soft / loose soil complete all as specified and directed. |
| 14 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 15 | Removing excavated materials n.exc. 50m and depositing where directed at a level n.exc 1.5m above the Starting point. |
| 16 | Supply & laying of 40mm outer dia, SN-4, double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propagating properties of approved colour including with fittings & fixtures as in cable protection complete all as specified and as directed. |
| 17 | Supply and fixing of 2.5 SQMM FRLSH PVC insulated three core unsheathed industrial multi-strand cable with flame retardant low smoke (FRLS) properties with flexible bright annealed bare copper conductor for voltage grade up to 1100 V confirming to IS-694:2010 complete all as specified and directed. |
| 18 | S&F of cable Junction Boxes, weather proof, suitable for outdoor installation of size 155mmx 210mm x 92 mm including with electrolytic aluminum bus bar suitable for cable size 10-16sqmm for 3 phase and neutral fixed on ebonite insulator and one MCB, DP 6-32 Amps, complete all as specified and directed. |
| 19 | Supply and fix in replacement of Automatic Street Light Switch for three phase Load of 12-18 KW using Infrared Sensor based NATURE SWITCH & Voltage Monitoring System (VMS) for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. The Sensor along with suitable Power Contactors with 3 nos. Contactors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 32-40 Amps each. Circuit wiring (Copper) of minimum 10 Sqmm and Auto-Manual selection option (Sensor By-Pass) should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Junction box confirming to IP-66 including taking down of unserviceable timer switch complete all as specified and directed. Please Enable Macros to View BoQ information |
