|
| 1 | M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 2 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 3 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed. |
| 4 | M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregate) in foundation, filling, mass concrete, complete all as specified and directed. |
| 5 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 6 | M&L for Formwork to edges of concrete flats , window cills, floor and roofs n exc 20cm wide, complete all as specified and directed. |
| 7 | M&L for Rendering 5mm thick in cement mortar 1:3 on concrete surfaces ceiling/ top and sides of chajjas/ facia of roof projection including necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed. |
| 9 | M&L for Rendering 12mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed. |
| 10 | M&L for 50mm thick plain cement concrete type B-1 1:3:6 (using 20mm graded aggregate) as in flooring complete all as specified and directed. |
| 11 | M & L for reinforced cement concrete (nominal mix) type M-25 using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 12 | M & L for RCC (nominal mix) type M-25 using 20 mm graded aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 13 | S&F 15 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified & directed |
| 14 | M&L for steel water tubings 20 bore, medium grade galvanized with all fittings such as socket, bends, elbows, nipple, caps, plugs, short pieces etc. (ISI Marked),fixing to wall or laid in trenches complete all as specified and as directed. |
| 15 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts complete all as specified and directed. |
| 16 | M&L preparation of new surfaces and applying two coats of cement base paint on walls complete all as specified and directed |
| 17 | M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed |
| 18 | M&L preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed |
| 19 | M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base 75mm thick, complete all as specified |
| 20 | S&F 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed |
| 21 | S&F 25mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed |
| 22 | S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 23 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 24 | S&F Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 25 | S&F bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 26 | M&L for Glazed ceramic coloured tiles of size 350 x 250 x 7mm/ 450x350x7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 27 | M&L for Non skid ceramic joint free colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 28 | Material and labour for cutting into existing manholes for connecting new drains, making good to pipe rendering, cutting out existing branching for and forming branch channel (1/2 or 3/4 round section) in cement concrete 1:2:4 type B1 mix finished smooth all as specified for 150mm bore pipes |
| 29 | Supply and laying in trenches, aligning and jointing of 150mm dia NP-2 Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified & directed. |
| 30 | Material and labour cement concrete (1:4:8) type D-2 bed to drain pipe including packing under and haunching against the sides of pipes after they are laid for 150mm bore of pipe. Complete all as specified and directed |
| 31 | S & F of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats. (Minimum weight 105gms) complete all as specified and directed |
| 32 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 33 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 34 | S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with Powder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm), complete all as specified and directed. |
| 35 | S&F 100mm long butt hinges medium weight ISI marked stainless steel complete all as specified and directed. |
| 36 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 37 | S&F 150mm long aluminium barrel tower bolts, stove enamelled black with bright boltand fixed, ISI marked, complete all as specified and directed. |
| 38 | S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed. |
| 39 | S&F galvanised mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanised wire staples complete all as specified and directed. |
| 40 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each panes including glass pin complete all as specified and directed. |
| 41 | S&F Vitreous China wash down water closet pan (Pedestal pattern) including P or S trap, fixing bolts & connecting to drain pipe including plastic seat cover with flat bottom cover and mild steel chromium plated hinging device and connection to flush pipe, anti symphonic pipe complete, all as specified and directed. |
| 42 | S&F vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including 32mm waste coupling and waste pipe PVC 32mm dia to be fixed iron brackets complete all as specified and directed. |
| 43 | S&F pillar tap chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 44 | S&F of bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 45 | S&F of stop/angle valve 15 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete all as specified and directed. |
| 46 | S&F 20 mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge. |
| 47 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 48 | S&F of 75mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 49 | S&F of 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 50 | S&F of 110mm bore pipes, PVC (SWR) bends any radius fitting for PVC (SWR) pipes complete all as specified and directed. |
| 51 | S&F 75mm bore PVC (SWR) floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 52 | S&F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal for PVC (SWR) pipes complete all as specified and directed. |
| 53 | S&F for 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 54 | M&L for Mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 55 | M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed. |
| 56 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 57 | M&L for point wiring for one light point controlled by one way switch with FRLS PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in FRLS PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc. ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed.( In ceiling Portion surface conduit wiring shall be carried out.) |
| 58 | All as per item No. 57.00 here-in-before but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts |
| 59 | All as per item No. 57.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board |
| 60 | All as per item No 57.00 here-in-before but using 4.00 Sqmm (nominal area) multistranded copper conductor cable for geyser sheet metal plug socket outlet/metal plug top including 4.00 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for geyser on independent point complete all as specified and directed. |
| 61 | M&L for switch Piano flush type single pole one way 5/6 Amp , complete all as specified and directed. |
| 62 | M&L for switch, socket combination 2 in 1 , 3 pin, 5 and 15 Amp flush type all as specified and directed. |
| 63 | M&L for switch, socket combination 3 pin, 5 Amp flush type, complete all as specified and directed. |
| 64 | M&L for ceiling rose with ceiling rose Polycarbonate body surface bakelite 2 to 3 terminals, 230 volts, complete all as specified and directed. |
| 65 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. |
| 66 | S&F lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting complete all as specified and directed. |
| 67 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. |
| 68 | Supply and fixing LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge. |
| 69 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 70 | S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 71 | S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 72 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 73 | Cutting existing GI pipe of size 40/25 mm by any means ( 1 cu t) in position for insertion of GI fittings viz Tee, socket, nipple etc of required bore complete all as specified and directed by Engr-in-Charge. NOTE : (i) GI fittings, Excavation and earth work required at site shall deemed to be included in the unit rate |
| 74 | S&F exhaust fan, steel body AC single Phase 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 75 | M&L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade, Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 of SSR Part-I connected to DBs all as specified and indicated including testing on completion. |
| 76 | Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 Sq mm 2 core complete all as specified and directed. Note: Earth work (Excavation, Returning & refilling and removal), sand cushioning, cable protection cover, GI protection pipe shall be measured and paid for separately under respective item of Schedule |
| 77 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for foundation, laying of cables, pipes etc and getting out in any type of soil complete all as specified and directed. |
| 78 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as directed. |
| 79 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 80 | M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specified and punned thickness shall be measured and paid. |
| 81 | Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L for Construction of brick masonry valve pit of size 75cmx75cmx90cm (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and pointing externally as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40mmX40mmX6mm with handle, locking arrangement and painting with two coats of synthetic enameled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m concrete etc. all as specified and shown on drawing. |
| 83 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
