|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : REPAIR/MAINTENANCE OF CENTRIFUGAL PUMPS, MONO BLOCK PUMPS, SUBMERSIBLE PUMPS, STARTER PANELS AND CONNECTED CABLES PANELS AND ASSOCIATED WORKS AND CLEANING OF OHT / UG SUMPS & HOUSE SERVICE TANKS AND REPAIR / MAINTENANCE TO TREATED WATER TO STP AT HQTC. CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | ITEMS APPLICABLE FOR 'JOB A' |
| 3 | S&F in replacement of phase sequence corrector 3 phase 415 Volts with time delay relay with and including input supply, reverse phase protection against sigle phasing, voltage unbalancing, low voltage, high voltage etc. with necessery copper connections all as specified and directed. Make - SECO Model RPC-07 or Techno-commercially equivalent in Lauritz Knudsen (Formerly L&T)/ Legrand. |
| 4 | Disconnectiong existing defective electric motor of any make, 60 HP from electric mains isolating the naked connections, removing from foundation by unscrewing the nuts, bolts etc, discouple from pump, opening of motor for inspection in presence of Engr-in-Charge & carry out minor repairs at site, re-assembling the motor after repair, refixing in position, re-connecting same as prior including replacement of nuts, bolts washers of suitable size, testing and commissioning as and when required complete all as specified and directed. Notes : (a) Replacement of defective parts shall be measured and paid separately as S&F here after. (b) In case of major repairs not possible at site, the motor shall be shifted to contractor’s workshop, and cost of shifting to same and back to site shall be included in the rates. |
| 5 | All as per srl item No.2 here-in-before but capacity 20 HP |
| 6 | All as per srl item No.2 here-in-before but capacity 12.5 HP |
| 7 | All as per srl item No.2 here-in-before but capacity 10 HP |
| 8 | All as per srl item No.2 here-in-before but capacity 7.5/5 HP |
| 9 | All as per srl item No.2 here-in-before but capacity 03HP |
| 10 | All as per srl item No.2 here-in-before but capacity 02 HP |
| 11 | All as per srl item No.2 here-in-before but capacity 1.0/0.5 HP |
| 12 | All as per srl item No.2 here-in-before but capacity upto 3 HP (Single Phase) of any type & size. |
| 13 | Taking out old unserviceable/burnt copper winding of motors capacity 60 HP (defective motor taken out in item No. 1above) and S&F for rewinding of elect motor of capacity up to 60 HP, 3 Phase with super enamelled copper winding wire of suitable gauge as per existing including cleaning of rotor slots, all winding/insulation material, varnishing etc. complete and testing at site on full load after reinstallation to the full satisfaction of Engr-in-Charge as and when required all as specified and as directed. (motor obtained as per Sl item No 2 above) |
| 14 | All as per srl item No.11 here-in-before but capacity 20 HP (motor obtained as per Sl item No 3 above) |
| 15 | All as per srl item No.11 here-in-before but capacity 12.5 HP(motor obtained as per Sl item No 4 above) |
| 16 | All as per srl item No.11 here-in-before but capacity 10 HP (motor obtained as per Sl item No 5 above) |
| 17 | All as per srl item No.11 here-in-before but capacity 7.5/5 HP (motor obtained as per Sl item No 6 above) |
| 18 | All as per srl item No.11 here-in-before but capacity 03 HP (motor obtained as per Sl item No 7 above) |
| 19 | All as per srl item No.11 here-in-before but capacity 02 HP(motor obtained as per Sl item No 8 above) |
| 20 | All as per srl item No.11 here-in-before but capacity 1.0/0.5 HP (motor obtained as per Sl item No 9 above) |
| 21 | All as per srl item No.11 here-in-before but capacity upto 3 HP (Single Phase) of any type & size. (motor obtained as per Sl item No 10 above) |
| 22 | Taking out unserviceable terminal plate with connector and outer cover of electric motor of any make, type upto 50 to 60 HP capacity and supply & connecting, testing of terminal plate with connector, same as per existing complete all as specified and as directed.(motor obtained as per Sl item No 2 above) |
| 23 | All as per srl item No 20 here-in-before but 20 HP to 50 HP, 3 phase of any type & size. (motor obtained as per Sl item No 3 above) |
| 24 | All as per srl item No 20 here-in-before but 12.5 HP to 25 HP, 3 phase of any type & size. (motor obtained as per Sl item No 4 above) |
| 25 | All as per srl item No 20 here-in-before but 10 HP to 12.5 HP, 3 phase of any type & size. (motor obtained as per Sl item No 5 above) |
| 26 | All as per srl item No 20 here-in-before but 05 HP to 7.5 HP, 3 phase of any type & size. (motor obtained as per Sl item No 6 above) |
| 27 | All as per srl item No 20 here-in-before but 03 HP to 01 HP, 3 phase of any type & size. (motor obtained as per Sl item No 7,8,9 & 10 above) |
| 28 | S&F for replacement of Ball bearing of the electric motor 50 to 60 HP, 415 Volt, opended in item No 2 here in before complete all as directed. |
| 29 | S&F for replacement of Ball bearing of the electric motor 20 to 50 HP, 415 Volt, opended in item No 3 here in before complete all as directed. |
| 30 | S&F for replacement of Ball bearing of the electric motor 12.5 HP to 25 HP, 415 Volt, opended in item No 4 here in before complete all as directed. |
| 31 | S&F for replacement of Ball bearing of the electric motor 10 HP to 12.5 HP, 415 Volt, opended in item No5 here in before complete all as directed. |
| 32 | S&F for replacement of Ball bearing of the electric motor 05 HP to 7.5 HP, 415 Volt, opended in item No 6 here in before complete all as directed. |
| 33 | S&F for replacement of Ball bearing of the electric motor upto 3HP to 1 HP , three/single phase opended in item No 7,8,& 9 here in before complete all as directed. |
| 34 | S&F for replacement of MS Shaft of the electric motor upto 50 to 60 HP 440 Volts, complete all as specified.( Motor obtained in srl item No 2 here-in-before) |
| 35 | All as per srl item No 32 here-in-before but foro 20 HP to 50 HP 440 Volts, complete all as specified.( Motor obtained in srl item No 3 here-in-before) |
| 36 | All as per srl item No 32 here-in-before but for 12.5 to 25HP, 440 Volts Electric Motors. (Motor obtained form srl item No 4 here-in-before) |
| 37 | All as per srl item No 32 here-in-before but for 10 HP to 12.5 HP, 440 Volts Electric Motors. (Motor obtained form srl item No 5 here-in-before) |
| 38 | All as per srl item No 32 here-in-before but for 05 HP to 7.5 HP, 440 Volts Electric Motors. (Motor obtained form srl item No 6 here-in-before) |
| 39 | All as per srl item No 32 here-in-before but for 3HP to 1 HP, 440 Volts Electric Motors. (Motor obtained form srl item No 7,8,9 & 10 here-in-before) |
| 40 | Taking out defective monoblock/centrifugal pump set of single/three phase upto 60 HP, any type, make by unscrewing the foundation bolts, disconnecting from water connection, and disconnecting from electric motor, opening for inspection in presence of Engr-in-Charge as and when required and carry out minor repair at site, in case of major repair/replacement of parts not possible at site, the pump shall be shifted to contractor's workshop on his own cost, and re-fixing, re-connecting in position, testing and commissioning complete including replacement, complete all as specified and directed. Note:- 1. Replacement of defective part by new one shall be measured and paid separately under respective items. 2. Cast of shifting to workshop and back to site included in the quoted rates. |
| 41 | All as per srl item 38 here-in-before but 40 to 50 HP. |
| 42 | All as per srl item 38 here-in-before but 15 to 25 HP. |
| 43 | All as per srl item 38 here-in-before but 10 to 12.5 HP. |
| 44 | All as per srl item 38 here-in-before but 05 to 7.5 HP. |
| 45 | All as per srl item 38 here-in-before but 03 to 01 HP. |
| 46 | S&F for replacement of unserviceable/defective mild steel shaft 50 to 60 HP centrifugal pump set of any make complete all as specified and as directed. Note:- Pump for the same taken out in item 38 here-in-before. |
| 47 | All as per srl item No 44 here-in-before but for Gland packing, CI Check Nut, Gland Cover with Nuts and Bolts. |
| 48 | All as per srl items 44 here-in-before but ball bearing including greasing etc. |
| 49 | All as per items 44 here-in-before but impeller bronze. |
| 50 | All as per srl items 44 here-in-before but neck ring. |
| 51 | S&F for replacement of unserviceable/defective mild steel shaft 40 to 50 HP centrifugal pump set of any make complete all as specified and as directed. Note:- Pump for the same taken out in item 39 here-in-before. |
| 52 | All as per srl item No 49 here-in-before but for Gland packing, CI Check Nut, Gland Cover with Nuts and Bolts complete all as specified and as directed. |
| 53 | All as per srl items 49 here-in-before but ball bearing including greasing etc complete all as specified and as directed. |
| 54 | All as per items 49 here-in-before but impeller bronze complete all as specified and as directed. |
| 55 | All as per srl items 49 here-in-before but neck ring complete all as specified and as directed. |
| 56 | S&F for replacement of unserviceable/defective mild steel shaft 15 to 25 HP, centrifugal pump set of any make complete all as specified and as directed. Note:- Pump for the same taken out in item 40 here in before. |
| 57 | All as per srl item No 54 here-in-before but for Gland packing, CI Check Nut, Gland Cover with Nut and Bolts, complete all as specified. |
| 58 | All as per srl items 54 here-in-before but ball bearing including greasing etc complete all as specified. |
| 59 | All as per srl items 54 here-in-before but impeller bronze. |
| 60 | All as per srl items 54 here-in-before but neck ring. |
| 61 | S&F for replacement of unserviceable/defective mild steel shaft 10 to 12.5 HP, centrifugal pump set of any make complete all as specified and as directed. Note:- Pump for the same taken out in item 41 here in before. |
| 62 | All as per srl item No 59 here-in-before but for Gland packing, CI Check Nut, Gland Cover with Nut and Bolts, complete all as specified and as directed. |
| 63 | All as per srl items 59 here-in-before but ball bearing including greasing etc complete all as specified and as directed. |
| 64 | All as per srl items 59 here-in-before but impeller bronze complete all as specified and as directed. |
| 65 | All as per srl items 59 here-in-before but neck ring complete all as specified and as directed. |
| 66 | S&F for replacement of unserviceable/defective mild steel shaft upto 5 HP centrifugal pump set of any make complete all as specified and as directed. Note:- pump taken out for the same in item No 42 here in before. |
| 67 | All as per srl item No 64 here-in-before but Gland packing, CI Check Nut, Gland Cover with Nut and Bolts. |
| 68 | All as per srl items No 64 here-in- before but ball bearing including greasing etc |
| 69 | All as per srl items No 64 here-in-before but impeller bronze/brass. |
| 70 | All as per items No 64 here-in-before but neck ring. |
| 71 | S&F for replacement of unserviceable/defective mild steel shaft upto 03 to 01 HP centrifugal pump set of any make complete all as specified and as directed. Note:- pump taken out for the same in item No 43 here in before. |
| 72 | All as per srl item No 69 here-in-before but Gland packing, CI Check Nut, Gland Cover with Nut and Bolts. complete all as specified. |
| 73 | All as per srl items No 69 here-in- before but ball bearing including greasing etc . |
| 74 | All as per srl items No 69 here-in-before but impeller bronze/brass. |
| 75 | All as per items No 69 here-in-before but neck ring. |
| 76 | Disconnecting electric connections from starter, disconnecting the pump and motor of any capacity opening the pump and motor to locate the faults in presence of Engineer-in-Charge as and when required, and carry out necessary repairs as directed including transporting to workshop, re-assembling the same after repair, taking down in well, including column pipe of any dia, each 10 ft long, and submersible cable, which have been taken out, re-connecting all electrical and water connections as per existing complete testing and commissioning including new packing materials, nuts,bolts washers of suitable size all as specified and as directed.Note:- 1. The replacement of parts shall be measured and paid separately under respective items.2. Cost of shifting to workshop and back to site shall be included in the quoted rates. |
| 77 | Taking out old unserviceable/burnt winding from the submersible 3 phase motors up to 3 HP and M& L for rewindinig the same with insulated winding wire as per existing gauge as approved by Engr-in- Charge and testing after repair complete all as specified and as directed. |
| 78 | All as per srl items No 75 here-in-before but above 3HP and upto 5 HP. |
| 79 | All as per srl items No 75 here-in-before but above 5 HP upto 7.5 HP. |
| 80 | All as per srl items No 75 here-in-before above 7.5 HP and up to10 HP. |
| 81 | All as per srl item No 75 here-in-before above 10 HP and up to12.5 HP. |
| 82 | S&F in replacement of GM (Gun Metal) bearing bush suitable for submersible pump and motor of capacity above 10 HP and upto 12.5 HP, complete all as specified and as directed. |
| 83 | All as per srl item No 80 here-in-before but for rotor sleeve. |
| 84 | All as per srl item No 80 here-in-before but for water seal. |
| 85 | All as per srl item No 80 here-in-before but for thrust bearing. |
| 86 | All as per srl item No 80 here-in-before but for revolving disc. |
| 87 | All as per srl item No 80 here-in-before but for connection piece. |
| 88 | All as per srl item No 80 here-in-before but for sand guard. |
| 89 | All as per srl item No 80 here-in-before but for sealing ring. |
| 90 | All as per srl item No 80 here-in-before but for upper housing. |
| 91 | All as per srl item No 80 here-in-before but for lower housing. |
| 92 | All as per srl item No 80 here-in-before but for upper flange with studs & nuts. |
| 93 | All as per srl item No 80 here-in-before but for lower flange with studs & nuts. |
| 94 | All as per srl item No 80 here-in-before but for seal bush. |
| 95 | All as per srl item No 80 here-in-before but for pump jacket seven stage. |
| 96 | All as per srl item No 80 here-in-before but for distance sleeve. |
| 97 | All as per srl item No 80 here-in-before but for pump shaft key/stage. |
| 98 | All as per srl item No 80 here-in-before but for hook. |
| 99 | All as per srl item No 80 here-in-before but for GM neck ring. |
| 100 | S&F in replacement of GM (Gun Metal) bearing bush suitable for submersible pump and motor of capacity above 7.5 HP and up to10 HP complete all as specified and as directed. |
| 101 | All as per srl item No 98 here-in-before but for sand guard. |
| 102 | All as per srl item No 98 here-in-before but for sealing ring. |
| 103 | All as per srl item No 98 here-in-before but for upper housing. |
| 104 | All as per srl item No 98 here-in-before but for PVC. Impeller. |
| 105 | All as per srl item No 98 here-in-before but for E. P. Impeller. |
| 106 | All as per srl item No 98 here-in-before but for stage bowl E. P. |
| 107 | All as per srl item No 98 here-in-before but for guide bush.B118:B119 |
| 108 | All as per srl item No 98 here-in-before but for pump shaft seven stage. |
| 109 | All as per srl item No 98 here-in-before but for pump jacket seven stageB120:B121. |
| 110 | All as per srl item No 98 here-in-before but for distance sleeve. |
| 111 | All as per srl item No 98 here-in-before but for pump shaft key/stage. |
| 112 | All as per srl item No 98 here-in-before but for hook. |
| 113 | All as per srl item No 98 here-in-before but for GM neck ring. |
| 114 | S&F in replacement of Gun Metal bearing bush suitable for submersible pump and motor of capacity above 5 HP and up to 7.5 HP, complete all as specified and as directed. |
| 115 | All as per srl item No 112 here-in-before but for rotor sleeve. |
| 116 | All as per srl item No 112 here-in-before but for water seal. |
| 117 | All as per srl item No 112 here-in-before but for thrust bearing. |
| 118 | All as per srl item No 112 here-in-before but for revolving disc. |
| 119 | All as per srl item No 112 here-in-before but for connection piece. |
| 120 | All as per srl item No 112 here-in-before but for sand guard. |
| 121 | All as per srl item No 112 here-in-before but for sealing ring. |
| 122 | All as per srl item No 112 here-in-before but for upper housing. |
| 123 | All as per srl item No 112 here-in-before but for inter ring. |
| 124 | All as per srl item No 112 here-in-before but for DOL piece. |
| 125 | All as per srl item No 112 here-in-before but for NRV CI body. |
| 126 | S&F in replacement of GM (Gun Metal) bearing bush suitable for submersible pump and motor of capacity 3 HP and up to 5 HP, complete all as specified and as directed. |
| 127 | All as per srl item No 124 here-in-before but for revolving disc. |
| 128 | All as per srl item No 124 here-in-before but for connection piece. |
| 129 | All as per srl item No 124 here-in-before but for sand guard. |
| 130 | All as per srl item No 124 here-in-before but for seal bush. |
| 131 | All as per srl item No 124 here-in-before but for motor base. |
| 132 | All as per srl item No 124 here-in-before but for cable seal. |
| 133 | All as per srl item No 124 here-in-before but for thrust plate. |
| 134 | All as per srl item No 124 here-in-before but for S. S. coupling. |
| 135 | All as per srl item No 124 here-in-before but for PVC. Impeller. |
| 136 | S&F for surface mounting Time switch maxier QT 30A (24 Hrs) complete including dismanting the existing time switch from the existing panel complete all as specified and as directed. Make : Lauritz Knudsen (Formerly L&T) or Techno-commercially equivalent in Legrand or Indo-Asian |
| 137 | S&F for power contactors MNX-40 Amps, 415 Volts, AC operated 3 phase, MNX or as per existing complete including taking down the existing all as specified and directed. Make : Lauritz Knudsen (Formerly L&T) or Techno-commercially equivalent in Legrand or Indo-Asian |
| 138 | S&F for power contactors MNX 25 Amps, 415 Volts, AC operated 3 phase, coil volatage 220 or as per existing complete including taking down the existing all as specified and directed. Make : Lauritz Knudsen (Formerly L&T) or Techno-commercially equivalent in Legrand or Indo-Asian |
| 139 | S&F power contactors 32 Amps, 415 Volts, AC operated 3 phase,coil volatage 220 MNX or as per existing complete including taking down the existing all as specified and directed. Make : Lauritz Knudsen (Formerly L&T) or Techno-commercially equivalent in Legrand or Indo-Asian |
| 140 | All as per srl item No 137 here-in-before but 70 Amps, ML-4, complete all as specified and as directed. |
| 141 | All as per srl item No 137 here-in-before but 16 to 32 Amps complete all as specified and as directed. |
| 142 | All as per srl item No 137 here-in-before but 140 Amps MNX type contractor complete all as specified and directed . |
| 143 | Supply connecting testing and commissioning submersible cable with copper conductor, stranded of size 10 sqmm 3 core complete including dismantling the old unserviceable cable complete all as specified and as directed. |
| 144 | Supply, install, testing and commissioning for fully automatic star delta starer in repairs, 3 Phase 415 volts suitable for 60 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 145 | Supply, install, testing and commissioning for fully automatic star delta starer in repairs, 3 Phase 415 volts suitable for 20 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 146 | Supply, install, testing and commissioning for fully automatic star delta starer in repairs, 3 Phase 415 volts suitable for 10 HP to 12.5 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 147 | Supply, install, testing and commissioning for fully automatic star delta starer in repairs, 3 Phase 415 volts suitable for 7.5 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 148 | Supply, install, testing and commissioning for DOL starter in repairs, 3 Phase 415 volts suitable for 05 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 149 | Supply, install, testing and commissioning for DOL starter in repairs, 3 Phase 415 volts suitable for 03 HP to 01 HP pumps complete including dismantling the existing starter complete all as specified and as directed. |
| 150 | Supply, install, testing and commissioning for DOL starter in repairs, 3 Phase 415 volts but in sheet metal enclosure type, relay range 9-15 Amp, suitable upto 10 HP motors including dismantling the existing starter complete all as specified and as directed. |
| 151 | Disconnecting, electrically, isolating the existing unserviceable MCCB TP/TPN of any make and capacity and Supply, fixing, connecting, testing and commissioning MCCB TP/TPN, 440 volts fixed in existinig panel including necessary modification for new MCCB 400 amp capacity, breaking capacity 50 KA conferminig to relevant IS including all joining and connecting material complete all as specified and as directed. |
| 152 | All as per srl item No. 149 here-in-before but 200 Amps, breaking capacity 36 KA. |
| 153 | All as per srl item No. 149 here-in-before but 100 Amps breaking capacity 25 KA |
| 154 | Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purposeas per IS 15652-2006, (superceding IS 5424) suitable for electrical shock safety of sizes 2m x 1m., ISI marked, laid in front of the LT panel all as specified and directed. |
| 155 | M&L for painting to existing centifugal motor & pumping set complete including base frame with super enameled paint of existing colour coat by spray painting and writing of SM/MES No with white paint, 50 to 60 HP capacity all as specified and directed. |
| 156 | All as per srl item No 153 here-in-before but 40 to 50 HP capacity complete all as specified and as directed. |
| 157 | All as per srl item No 153 here-in-before but 15 to 25 HP capacity complete all as specified and as directed. |
| 158 | All as per srl item No 153 here-in-before but 10 to 12.5 HP capacity complete all as specified and as directed. |
| 159 | All as per srl item No 153 here-in-before but 5 to 7.5 HP capacity complete all as specified and as directed. |
| 160 | All as per srl item No 153 here-in-before but 1 to 3 HP capacity complete all as specified and as directed. |
| 161 | ITEMS APPLICABLE FOR 'JOB B' |
| 162 | De-watering, removing all moses, algae and dirt from internal walls, floors & mouths of pipes of RCC overhead reservoir/ under ground sump by using steel wire brush and cleaning with high pressure industrial vacuum cleaner including removing of dirty water completely using sludge pump set and disposing of the same to a safe distance and applying of anti bacterial sterilization spray to internal surfaces using Zero bacterial compound by approved chemical and bleaching powder and writing the date of cleaning on outside of tank/ sump using synthetic enamel paint of white colour over black background with letters of size 100mm height x 100mm wide complete for OH Reservoir 1,00,000 Gallons capacity with 98 feet staging all as directed and specified. |
| 163 | All as per item No.160 above but OH Reservoir 50,000 Gallons capacity with 65 feet staging |
| 164 | All as per item No.160 here-in-before but OH Reservoir 10,000 Gallons capacity with 60 feet staging |
| 165 | All as per item No.160 here-in-before but but including white wash UG sump 25000 ltrs capacity |
| 166 | All as per item No.160 here-in-before but including white wash outer side of UG sump 1,50,000 Gallons capacity |
| 167 | All as per item No.160 here-in-before but including white wash outer side of UG sump 75,000 Gallons capacity |
| 168 | All as per item No.160 here-in-before but including white wash outer side of UG sump 50,000 Gallon capacity |
| 169 | All as per item No.160 here-in-before but including white wash outer side of collection tank swimming pool 50,000 Litres capacity |
| 170 | All as per item No.160 here-in-before but under Ground Sump 10,000 ltrs capacity |
| 171 | All as per item No.160 here-in-before but but including white wash outer side of Static water tank 50,000 litres capacity |
| 172 | All as per item No. 160 here-in-before but OH service tank upto 25000 ltrs capacity |
| 173 | All as per item No. 160 here-in-before but PVC under ground tank upto 5000 ltrs capacity |
| 174 | Supply only CDD 5000 (chlorine dioxide powder)(Cas No 10049-04-4)(ISO 9001:2015) white in colour highly soluble in water,99.9 % effective against water borne micro organisms disinfectant for chlorination of water complete all as specified and as directed. |
| 175 | S&F in repair flexible PVC braided pipe, heavy duty, 50mm dia with circlips/ clamps suitable for suction sweeper all as specified and as directed. |
| 176 | S&F in repair flexible PVC braided pipe, heavy duty, 40mm dia with circlips/ clamps suitable for suction sweeper all as specified and as directed. |
| 177 | S&F in repair flexible PVC braided pipe, heavy duty, 25mm dia with circlips/ clamps suitable for suction sweeper all as specified and as directed. |
| 178 | S&F Nylon rope heavy duty (Manila type) of size 25mm dia all as specified and as directed. |
| 179 | S&F in repair, Nylon brush suitable for suction sweeper, 2 feet x 2 inch size with necessary nuts, bolts, washers etc including removing unserviceable brush all as specified and as directed. |
| 180 | S&F in repair rubber gasket suitable for suction sweeper including MS flat strip support, bolts, nuts and washers complete, all as specified and as directed. |
| 181 | S&F in repair Gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) of size 15 mm including taking down complete all as specified & directed. |
| 182 | All as per item No 179.00 here-in-before but 20 mm dia. |
| 183 | All as per item No 179.00 here-in-before but 25 mm dia. |
| 184 | All as per item No 179.00 here-in-before but 40 mm dia. |
| 185 | S&F GI steel water tubes, light grade,50 mm bore including all new fittings, laid in wall/ ceiling and floor complete of following sizes all as specified and as directed. |
| 186 | All as per item No 183.00 here-in-before but medium grade GI pipe 25 mm bore. |
| 187 | Dewatering, cleaning of FIDAS/UG sump at STP with high pressure water jet to remove all mosses, algae and dirt and removal of dirty water using sludge pump set/industrial vaccume cleaners and disposing of the same to a safe distance and including scrubbing of internal floor surface by using steel brush, removing of dirt,spread the bleaching powder aroun the tank completely and carefully remove the diffuser and after cleaning reconnection of the diffusers ,testing the same including applying two coats of white wash to external surface complete and writing in white colour the date of cleaning by using synthetic enamel paint over black back ground with letters of size 100mm height, 100mm wide complete all as specified and directed for FIDAS 50000 Ltrs capacity. |
| 188 | All as per item 185.00 here-in-before but UG Raw water sump of capacity 100000 ltrs including incoming chambers. |
| 189 | All as per item 185.00 here-in-before but UG sump 25000 ltrs (clarified water collection tank) capacity |
| 190 | All as per item185.00 here-in-before but treated water UG Sump 100000 Ltrs capacity |
| 191 | S&F butterfly valve of size 100mm dia complete fittings with bolts and nuts and washers including providing rubber insertion of suitable thickness complete ncluding taking out existing unserviceable valve as per existing make complete all as specified and directed |
| 192 | S&F butterfly valve of size 150mm dia complete fittings SI marked, with bolts and nuts and washers including providing rubber insertion of suitable thickness complete ncluding taking out existing unserviceable valves as per existing make complete all as specified and directed |
| 193 | S&F control valve 25mm dia of superior quality complete all as specified and directed |
| 194 | S&F PVC control valve 20mm dia of superior quality all as specified and as directed. |
| 195 | S&F in repair PPR pipe PN 1.6 , 40mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 196 | S&F in repair PPR pipe PN 1.6 , 50 mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 197 | S&F in repair PPR pipe PN 1.6 , 75 mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 198 | S&F in repair PPR Ball valves(brass insert) dia 40mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 199 | S&F in repair PPR Ball valves(brass insert) dia 50mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 200 | S&F in repair PPR Ball valves(brass insert) dia 63 mm dia with all fitting such as elbows, tees, unions, collar etc all as specified and as directed. |
| 201 | Excavation in trenches not. exc. 1.5m wide and not exc. 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 202 | Returning,filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed. |
| 203 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
