|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed. |
| 2 | M&L for brick work using Flyash brick conforming to IS-12894 2002, non modular, class designation 7.5, straight or curved on plan, exc. 6.0 m mean radius in CM (1:6) complete all as specified & directed. |
| 3 | M&L for brick work with Flyash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete, complete all as specified & directed. |
| 4 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified & directed. |
| 5 | M & L for rendering 15mm thick in cement plaster in CM 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement .complete all as specified & directed. |
| 6 | M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M & L for rendering 10mm thick in CM 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, complete all as specified & directed. |
| 8 | M & L for rendering 15mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete, complete all as specified & directed. |
| 9 | M & L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall with itegral water proofing compound @ 3% by weight of cement surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | Supply only water proofing compound complete all as specified and as directed. |
| 11 | M&L for preparation of new or previously undecorated surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 12 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer by using roller complete all as specified & directed. |
| 13 | M & L for preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and as directed. |
| 14 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified & directed. |
| 15 | M & L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete, all as specified & directed. |
| 16 | Supply Only glass dividing strips 38mm wide and 3mm thick and inserted in position to confirm design etc complete all as specified & directed. |
| 17 | M & L for 75mm thick PCC 1:3:6 typeC2 using 40mm graded stone aggregate as in plinth protection. complete all as specified & directed. |
| 18 | M & L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in flooring, finished without using extra cement, complete all as specified & directed. |
| 19 | M & L for providing precast cement concrete jallies PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) 25mm thick (measured solid) including all moulding and set in CM (1:6) complete all as specified and as directed. |
| 20 | M & L for PCC 1:2:4 type B1 using 20mm graded stone aggr as in coping benching finished fair and even incl necessary form work complete all as specified and as directed. |
| 21 | M & L for precast PCC 1:2:4 type B-0 using 20mm graded stone aggregate as in lintel up to 1.5m clear span, cills, steps, bands, incl weathering, slightly rounded or chamfered angles, throating set in CM 1:4 and dirceted and other similar works including necessary form work complete all as specified |
| 22 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed, in any mortar complete all as specified & directed. |
| 23 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified & directed. |
| 24 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete |
| 25 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed. |
| 26 | M & L for rubber moulded cement concrete tiles 40cmx40cmx20mm or 30cmx30cmx20mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor including 20mm thick screed bed in CM 1:4 all as specified. complete all as specified & directed. |
| 27 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and as directed . |
| 28 | M & L for Ist class Exterior floor tiles of size 400x400x10 to12 mm / 300x300x10 to12 mm thick of approved colour and shade laid over 20mm thick screed bed in C:M 1:6 including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 29 | S&F Non Skid finish ceramic coloured tiles 7 to 8 mm thick joint free (area of each tile exc. 0.06 but n.exc 0.11 Sqm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:4 as approved including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 30 | S&F Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (area of each tile exc. 0.18 but n.exc 0.38 Sqm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:4 as approved including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 31 | S&F glazed coloured ceramic tiles 300x450x7 to 8mm/ 450X350x7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 as in vertical surfaces as approved including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 32 | S&F glazed coloured ceramic tiles 300x600x7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 as in vertical surfaces as approved including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 33 | S&F vitrified ceramic tiles designed light shade 10mm thick (Square/rectangular ) polished ,area of each tiles n.exc. 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match 20mm thick in net cement screed (1:6) including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 34 | Ditto- all as per item No. 33 above but in verticle surfaces in rendering 10mm thick in CM 1:3 including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. . |
| 35 | S&F Vitrified ceramic tiles designed dark shed, 10 mm thick(square /rectangular), polished, area of each tile exc 0.42 sqm but n.exc. 1.00 Sqm in floor etc , laid over 20 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 36 | Ditto- all as per item No. 35 above but in verticle surfaces in rendering 10mm thick in CM 1:3 including dismantling of floor, hearth or wall tiling and rubbish off the premises complete all as specified & directed. |
| 37 | S&F in repairs Solid PVC Wall Linning consisting of 5mm thick single side prelam color PVC sheet inclusive of solvent cement and fixing at site on PVC frame and PVC L-beading at top of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 38 | S&F 5mm thick PVC sheet fillet of width 35mm thick for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 39 | S&F in repairs of hallow strip PVC Wall Linning consisting of 5mm thick any color/desigened PVC sheet inclusive of nails and fixing at site on wall and PVC L-beading at top of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 40 | S&F in repairs of WPC louvers in wall Linning consisting of 5mm thick any color/desigened PVC sheet inclusive of nails and fixing at site on wall and PVC L-beading at top of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 41 | Taking out existing of aluminium frame/shutter of door /windows fixed same opening with glazed/ particle board in panels incl, wooden wall panelling all necessary repair and replacing with the aluminium snap beading, rubber packing, glazing clip etc upto area 4.50Sqm each etc complete all as specified & directed. |
| 42 | S&F in repair 1.5mm thick powder coated anodized aluminum partition wall partly paneled and partly glazed size of aluminum section 44X44x 1.5 to 1.8mm thickness divided into square or rectangular (not exc. 1.20Sqm each panel ) in shape top panel shall be glazed with 5.50mm thick sheet glass any shade& design make modi/ saint gobin & bottom panel shall be of 12mm thick prelaminated particle board exterior grade with both side choice lamination including necessary joining cleats glazing clips, rubber packing, aluminum snap beading screws, complete all as specified & directed. |
| 43 | Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified & directed. |
| 44 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified & directed. |
| 45 | Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified & directed. |
| 46 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 47 | Taking down shutter of any description n.exc 1 Sqm including irom mongrey and removing from side complete all as specified & directed. |
| 48 | Taking down shutter of any description exc 1 Sqm but n.exc 2 sqm including irom mongrey and removing from side complete all as specified & directed. Please Enable Macros to View BoQ information |
| 49 | Taking down shutter of any description exc 1 Sqm but n.exc 2 sqm including irom mongrey and removing from side complete all as specified & directed. Please Enable Macros to View BoQ information |
