Tender For Provn Of Submersible Pump And 01 X Storage Room And 01X Toilet Block At 181 Mbc Under Ge (P) Lohitpur
Tender Value
16 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
3 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Submersible Pump And 01 X Storage Room And 01X Toilet Block At 181 Mbc Under Ge (P) Lohitpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jun-2026 | Revised BOQ | BOQ | 27-Jun-2026 |
| 2 | 27-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out (upto 3.00 M beyond outer face of external wall) complete all as specified and directed. |
| 2 | Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed. |
| 3 | Material and labour Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | Material and labour reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | M & L for treating the bottom and sides of excavation at the rate of 5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of surface area complete all as specified and as directed. |
| 6 | M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of vertical surface complete all as specified and as directed (Area of the sub structure in contact with backfill to be measured). |
| 7 | Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed. |
| 8 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed. |
| 9 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 10 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in chajjas complete all as specified and directed. |
| 12 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 13 | Material and labour for brickwork with subclass 'B' old size bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 14 | Formwork to sides of concrete foundations, footings, bases of col umns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished surfaces of conrete flat complete all as specified and directed. |
| 15 | Formwork to sides of squar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and directed. |
| 16 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc rough finished also splays between floors and beams, etc complete all as specified and directed. |
| 17 | Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm (horizontal or sloping) thick; rough finished surfaces of concrete flat complete all as specified and directed |
| 18 | Formwork to chullah hoods, chajjas, troughs and similar items in cluding edges, rough finished surfaces of conrete flat complete all as specified and directed. |
| 19 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of conrete flat |
| 20 | Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 21 | Mild steel TMT bars 6 to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 22 | Supply and fixed pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, Size of fame |
| 23 | Supply and fixed 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type , both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed. |
| 24 | Supply and fixing Pressed Steel Windows/Ventilator using box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete complete all as specified and directed. |
| 25 | Material and labour 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 26 | Supply and fixed Aluminium anodised,barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 27 | Supply and fixed Aluminium alloy, anodised,sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 28 | Supply and fixed Butt hinges of 125 mm size, Medium weight, cold rolled mildsteel and fixed, complete all as specified and directed. |
| 29 | Supply and fixed extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 125 complete all as specified and directed. |
| 30 | M & L for treating the top surface of filled earth at the rate of 5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of surface complete all as specified and as directed. |
| 31 | Material and labour for mild steel small articles as holdfasts etc complete all as specified and directed. |
| 32 | Material and labour for cement concrete 1:3:6 Type C 1 (using 20 mm graded aggregate) in filling around pressed steel frames and bed blocks etc complete all as specified and directed. |
| 33 | Material and labour for 100 mm thick PCC 1:4:8 type D-2(using 40mm graded stone aggregate) as in sub base complete all as specified and directed |
| 34 | Material and labour for hardcore of broken stone or bolder of gauge n exc 63mm, deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified complete all as specified and directed. |
| 35 | Material and labour Machine cut kota stone slab flooring 20-25mm thick over cement screed base (20mm)in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 36 | M &L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed (10mm thick) in CM 1:3 and jointed with ditto as per item 13014 complete all as specified and directed. |
| 37 | Material and labour for rendering 15 mm thick in cement mortar 1:6 on faie face of brick work or concrete surface of walls finished fair and even complete all as specified and as directed. |
| 38 | Material and labour for rendering 15mm thick in two layer (10mm + 5 mm) in cement mortar 1:4 with external coat mix with WPC on brick work or concrete surface of walls finished fair and even complete all as specified and as directed.Note :- WPC will be measured separately. |
| 39 | Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling, chajjas of concrete surface, finished even and smooth without using extra cement complete all as specified and directed. |
| 40 | Supply only liquid integral water proofing compound complete all as specified and directed complete all as specified and directed. |
| 41 | Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection , finish even & smooth without using extra cement all as specified and directed. |
| 42 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed. |
| 43 | Material and labour for preparing the new plastered surfaces and applying two coats of OBD over a coat of Primer on walls all as specified and direcrted. |
| 44 | Material and labour for preparing the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed. |
| 45 | Material and labour for treating the soil alongwith external perimeter of the building at the rate of 2.5 litres of emulsion per Rm of surface area all as specified complete all as specified and directed. |
| 46 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 10 mm thick cement plaster in CM (1:4) using water proofing compound @ 3 % by weight of cement for filling depression if any to receive water proofing treatment and providing APP modified bituminous membrane water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.6 kg/sqm ± 5% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25 C, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints including for applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed by Engineer-In-charge. (Note : WPC shall be measured and paid separately). |
| 47 | Material and labour for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 4028, water troughs and the like including weathering, slightly rounded or chamfered angle and throating, as directed. |
| 48 | Material and labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beam; base for columns,etc; basement slabs, under-reamed piles and mass concrete all as sepcified and as directed. |
| 49 | Material and labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) Slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like concrete all as sepcified and as directed.) |
| 50 | Material and labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in in Beams, Cantilever bressummers ,Lintel above 1.5m span all as sepcified and as directed. |
| 51 | Material and labour for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in Columns, pillars, piers posts and struts all as sepcified and as directed. |
| 52 | Material and labour for factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing |
| 53 | Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 54 | Supply and fixed Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 55 | Supply and fixed stainless steel butt hinges 100 mm long complete all as specified and as directed. |
| 56 | M & L for 75 mm thick cement concrete 1:4:8 type-B2 (using 40 mm nominal size graded crushed stone aggregate) as in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. |
| 57 | M & L for cement concrete 1:2:4 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate as in floor 25 mm thick finished even and fair complete all as specified and directed. |
| 58 | M & L for polythene film, black, 50 micron laid in floors complete all as specified and as directed. |
| 59 | M&L Non - skid Ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match existing surface including 15 mm thick screed bed in cement mortar 1:4 complete all as specified |
| 60 | M&L Glazed ceramic tiles in vertical surface 450x300x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to matchexisting surface including 10mm thick backing coat in cement mortar 1:6 complete all as specified and as directed. |
| 61 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and fair complete all as specified and as directed. |
| 62 | Preparation of old decorated surfaces on ceilings and applying three coats of white wash complete all as specified and as directed. |
| 63 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:3 finished even and fair complete all as specified and as directed. |
| 64 | Supply and fixed 25mm Gun-metal globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed. |
| 65 | Supply and fixed 25mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 66 | Supply and fixed PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 67 | Supply and fixed 75 mm dia PVC (SWR) pipes single socketed, with rubber ring joints fixed to walls. a) |
| 68 | Supply and fixed 75 mm dia PVC (SWR) floor trap, plain with grating includ ing jointing with solvent cement complete all as specified and as directed. |
| 69 | S & F wash basins, vitreous china, white, flat back, size 580 mm X 450 mm (for hospital use) with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 70 | S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 71 | S & F 10 litres cap PVC, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as speecified and as directed. |
| 72 | Supply and fixed 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 73 | S & F cast iron, sand cast, socket and spigot, nominal dia 100 mm soil, waste and vent pipe as per IS 1729: 2002 in any length with cement joints, fixed to walls complete all as specified and as directed. |
| 74 | S & F stainless steel soap dish weight not less than 150 gm each fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 75 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 76 | M & L for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 77 | Supplying and laying CPVC pipes for potable hot and cold water distribution, nominal size 15 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 in trenches complete all as specified and as directed. |
| 78 | Supplying and laying CPVC pipes for potable hot and cold water distribution, nominal size 20 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 in trenches complete all as specified and as directed. |
| 79 | Supply and fixed Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed. |
| 80 | Supply and fixed 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated. |
| 81 | Supply and fixed bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed |
| 82 | Supply and fixed extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 75 complete all as specified and directed. |
| 83 | Supply and fixed 15mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA |
| 84 | M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 85 | Supply and fixed 20mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA |
| 86 | Supply and fixed PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 87 | Supply and fixed for Grating doom 100 mm dia of PTMT (Minimum weight 25gms) fixed complete. |
| 88 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil for foundation etc or for shaft, wells, manholes etc complete all as specified and directed. |
| 89 | M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half-brick thick honey-comb walling built in cement mortar 1:4 complete all as specified and as directed. |
| 90 | M & L for loose filling with broken stone or boulder aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, on open space complete all as specified and as directed. |
| 91 | M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 92 | M & L for concrete bed to drain pipes of internal diameter 150 mm, in cement concrete M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes complete all as specified and as directed. |
| 93 | S&F Reinforced concrete pipes 150mm , class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 94 | Material and Labour for Rotationally moulded, one-piece construction, LLDPE septic tank of capacity 1500 litre suitable for for 5-8 user , designed to carry sewage and sullage water including excavation in any type of soil, PCC 1:4:8 below foundation vent shaft connection as per manufacturer instruction etc.complete all as specified and directed. |
| 95 | M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLHS in and in PVC casing & caping of suitable size duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light/ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 96 | All as per item No. 95 above but 3 pin 5 amps socket out let point with the same board with other switches with cables of 1.5 Sqmm size complete all as specified and directed. |
| 97 | All as per item No. 95 here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed. |
| 98 | Supply and fixed sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 3 modules complete all as specified and directed. |
| 99 | -do- all as per item No 98 above but for 6 modules complete all as specified and directed. |
| 100 | Supply and fixed ceiling rose, 3 ph plastic round PVC/polycarbonate isolated body for mounting ceiling fan/exhaust fan/light fittings complete all as specified and directed. |
| 101 | Supply and fixed modular cover plate with frame for fixing of modular switches/sockets for 3 modules complete all as specified and directed. |
| 102 | -do- all as per item No. 101 above but for 6 modules complete all as specified and directed. |
| 103 | Supply and fixed switch piano modular flush type 5/6 Amps 230V AC complete one way complete all as specified and directed. |
| 104 | S&F modular switch socket outlet multipurpose 3 pin 15 Amps and one pin 5 Amps controlled by one switch complete all as specified and directed. |
| 105 | S & F surface and wall mounted LED batten 4feets with 1x20W indoor decorative luminaries with and including electronic driver and 1x20W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings complete all as specified and directed. |
| 106 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 107 | S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 108 | S&F MCB 6 to 32 amps single pole amp rating 240V, 10KA breaking capacity 'C' Curve complete all as specified. |
| 109 | S&F MCB DP 40 amps 240 volts 10KA breaking capacity 'C' Curve complete all as specified. |
| 110 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core, nominal cross sectional area of main conductor 10 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 111 | Supply and laying DWC 50mm pipe SN8 laid in trenches for protection of cable all as specified and directed by the Engr-in-Charge. |
| 112 | Supply and fixed sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 4 modules complete all as specified and directed. |
| 113 | Supply and fixed modular cover plate with frame for fixing of modular switches/sockets for 4 modules complete all as specified and directed. |
| 114 | S&F modular socket 6A out let 2/3 pin 5 Amps flush type complete all as specified and directed. |
| 115 | S & F surface and wall mounted LED batten 2 feets with 1x10W indoor decorative luminaries with and including electronic driver and 1x10W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings complete all as specified and directed. |
| 116 | S&F sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 117 | Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 118 | Supply install testing and commissioning of Submersible pumpset 05 HP electric driven 415V TP suitable for 50mm dia bore well with discharge of 65-100LPM and minimum head 100mtr necessary electrical connections as per manufactures specifications, including suitable flange complete all as specified and directed by Engr-in-Charge. |
| 119 | Supply and Fix Star-Delta Starter FOR 5 HP Motor. |
| 120 | Supply and fixing chain pulley block, triple spur gear 3 Ton Capacity with 3 mtr lift, manually operated completed with hooks high tensile forged steel conforming to IS : 3815 and load conforming to IS : 6216 and hand chain to IS : 2429 (Part-I) complete all specified and as directed. |
| 121 | Supply and fixing steel rope flexible 6mm dia with GI clamps nuts bolts washer etc for fixing of submersible pump set complete all as specified and directed. |
| 122 | Supply and fix submersible cable 3 core multistranded copper conductor PVC insulated waterproof (ISI marked) of size 6mm for connecting from starter to borewell submersible pump sets all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days