|
| 1 | Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-in-charge.1:3:6 or richer mix |
| 2 | Excavation for roadwork in soil with hydraulic excavatorincluding cutting and loading in tippers, trimming bottomand side slopes, in accordance with requirements oflines, grades and cross sections, and transporting to theembankment location with all lifts and lead up to 1000 mas per Section-300 of the specifications |
| 3 | Providing and Laying Cement Concrete Grade M-10with 40 mm graded crushed stone aggregate, spreadingthe concrete by shovels mixing shall be in mechanicalmixer, compacting by use of pin/plate/screed vibratorsincluding form work by strong steel girders fixed byspikes. |
| 4 | Providing and Laying Cement Concrete Grade M-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, includingcutting of joints @ 4 to 5 m interval and filling it with hotapplied bituminous sealant (without dowel bars) (max.thickness 20 cm). |
| 5 | Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by echanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed.All kinds of soil |
| 6 | Providing and laying in position cement concrete of specified radeexcluding the cost of entering and shuttering All work up to linth level.Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 7 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 8 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering for Walls (any thickness) including attached pilasters, butteresses, plinthand string courses etc |
| 9 | Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and string courses,fillets, columns, pillars, piers, abutments, posts and struts etc.aboveplinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 10 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Mild steel and Medium Tensile steel bars. |
| 11 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:3 ( 1cement : 3 coarse sand) with joints finished flush with cement mortar 1:3.Red sand stone |
| 12 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering All work up to plinthlevel.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 13 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works Please Enable Macros to View BoQ information |
