|
| 1 | Safe carriage of following material from ESC Daliganj/Chinahut to JE Dump store to work site including loading unloading and proper stacking of material |
| 2 | Line material |
| 3 | 11/0.4 KV 100 KVA T/F |
| 4 | LT Cable 1x630/400/240/3.5x240/400/70mmsq |
| 5 | ACSR Rabbit/dog/Racoon/Weasel conductor |
| 6 | 11 Polymer Pin Insulator |
| 7 | Earthing Rod |
| 8 | Fabrication, erection of sub-station type double pole on 8.5 mtr long PCC/11 mtr. Long ST pole along with fixing of necessary clamps. Accessories required including supply & fixing of straight MS 100x50mm top channel (2240mm long) one no., dropper channel, substation base angle 100x50 mm 2 nos. with arrangement of fixing 3 nos. pin insulator as per RESPO specification and direction of E/I. Only pole & insulator supplied by the deppt. |
| 9 | Dragging of ST/PCC pole to pit site, digging of pit erection and grouting (As per RESPO norms) of 11KV 9/11/8.5 mtr long ST/PCC pole with fixing of necessary items, such as V-type X-arm, F-bracket, 11KV Pin/Disc insulator, guarding angle(1.8 mm65x65x6) with nut & bolts its ramming as per RESSPO Specification. Only pole & insulator shall be supplied by the department. |
| 10 | Proper Jumpering of 11KV Line on tapping point |
| 11 | Provinding and Fixing of 3-Phase protection Distribution Box/Kiosk on the LT Pole including all clamps and material required for mouting connections and sealing. |
| 12 | Providing and fixing of 11KV DO Fuse set along with clamp and nut bolt |
| 13 | Laying of LT Cable from T/F to DP Box and DP Box to LT Line pole |
| 14 | Proper Jumpering with existing LT Line with PVC Cable |
| 15 | Laying stringing and sagging of 3Phase 3 wire 11KV line on ACSR Weasel/Rabbit /Racoon /Dog conductor as per Respo |
| 16 | Ordinary Earthing by MS Earth rod2500 mm long all material provided by department. |
| 17 | Earthing of Pipe type with 60 feet deep boring and providing jindal make pipe \\"B\\" class 1\\" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe . |
| 18 | Safe Installation of 100 KVA T/F on Pole by providing and fixing of all accessories along with making HT/LT connection and its commissioning. |
| 19 | Providing, fabrication and fixing of 11KV TPMO Set with AB Switch along with clamps, nut & bolts on existing double pole. |
| 20 | Grouting of PCC/STP in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESSPO norms. |
| 21 | Supply & Fixing |
| 22 | Al Lug 70 sqmm |
| 23 | Copper L piece |
| 24 | Nut & Bolts GST will be paid extra as per rule. Please Enable Macros to View BoQ information |
