|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. |
| 5 | 200 mm wide. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 7 | Suspended floors, roofs, landings, balconies and access platform |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 9 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 11 | Cement mortar 1:3(1 cement :3 coarse sand) |
| 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 13 | Granite stone slab of colour black, Cherry/Ruby red |
| 14 | Area of slab over 0.50 sqm |
| 15 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 17 | 300x16 mm |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 19 | 150x10 mm |
| 20 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 21 | 125 mm |
| 22 | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). |
| 23 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). |
| 24 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 25 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 26 | Size of Tile 600 x 600 mm |
| 27 | 15 mm cement plaster on the rough side of single or half brick wall of mix: |
| 28 | 1:4(1 cement: 4 fine sand) |
| 29 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 30 | Finishing walls with textured exterior paint of required shade: |
| 31 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 33 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 36 | Old work (one or more coats) |
| 37 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 38 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 39 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 42 | One or more coats on old work |
| 43 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 44 | Old work (Two or more coats applied @ 1.43 V/ 10 sqm) over existing cement paint surface |
| 45 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 46 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 47 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 48 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 49 | Of area 3 sq. metres and below |
| 50 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 51 | For thickness of tiles 10 mm to 25 mm |
| 52 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 53 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 55 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 56 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 57 | Semi rigid pipe |
| 58 | 32 mm dia |
| 59 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 61 | 20 mm nominal dia Pipes |
| 62 | 50 mm nominal dia Pipes |
| 63 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 64 | 45 cm length |
| 65 | 15 mm nominal bore |
| 66 | Providing and fixing PTMT grating of approved quality and colour. |
| 67 | Rectangular type with openable circular lid |
| 68 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating |
| 69 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 70 | Providing and fixing digital joint less wall tiles of size 300x600mm (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, block of any size as approvd by engineer-in-charge in skirting rises of steps and dado over 12mm thick bed of cement mortar 1:3 (1cement:3coarse sand ) and jointing with grey cement. |
| 71 | Providing and fixing white Vitreous china urinal with back inlet of chic range of ROCA (RS35945J460) or equivalent make Urinal of size (325*330*560) with back inlet or equivalent including cutting and making good the walls and for wherever required as per direction of Engineer-in-Charge. |
| 72 | Providing and fixing Vitreous china wall-hung WC with horizontal outlet i/c slender plus concealed cistern 80mm and push chrome plate of ROCA(RS34647L460 & RE890010200& RE890195001) or equivalent make including cutting and making good the walls and for wherever required omplete as per direction of Engineer-in-Charge. |
| 73 | Providing and fixing C.P. hand shower (Health faucet) with 8 mm dia. & 1.2 m long flexible tube including wall hook of jaquar make or Equivalent etc. complete as per direction of Engineer-in-Charge. |
| 74 | Supplying and fixing Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated) of Jaguar(SNR-STL-51087) or Equivalent etc. as per direction of enginer-in-charge. |
| 75 | Providing and fixing S.S Toilet paper holder of jaquar(AKP-1153S) or Equivalent make etc. complete as per direction of enginer-in-charge. |
| 76 | Providing and fixing C.P Brass two way bib cock with flange of Kubix Range of Jaquar brand(ALI-850412) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 77 | Providing and fixing Basin mixer with smooth body With 8 l/min fl ow limiter, aerator & flexible supply hoses L20 of Roca(RT5A3J09C00) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 78 | Providing and fixing white colour The GAP Soft-closing seat and cover of ROCA(RE801472464) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 79 | Providing and fixing on-countertop Basin size 520x400 of ROCA make(RS32722K460) or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 80 | Providing and fixing angular stop cock with wall flange of Jaquar(ALI-85053) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 81 | Providing and fixing Waste coupling 32 mm size half thread with 80 mm height of Jaquar(ALD - 709) make or Equivalent etc. complete as per direction of Engineer-in-Charge. |
| 82 | Providing and fixing Bottle Trap (with internal partition ) 32 mm size with 300 mm & 190 mm long wall connection pipes & wall flange of Jaquar make or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 83 | Providing and fixing soap dish holder of Jaquare(ACN-1131N) brand or equivalent make etc. complete as per direction of engineer-in-charge. |
| 84 | Providing and fixing curved shaped urinal partition with frosted glass of 10mm thick including fitting and fixtures of Jaguar make (JSE-CHR-110UC450X) or equivalent etc. complete as per direction of Engineer-in-Charge. |
| 85 | Providing and fixing Towel Ring Round with Round Flange of Jaquar(ACN-1121BN) or Equivalent make etc. complete as per direction of enginer-in-charge. |
| 86 | Providing and fixing S.S Single Towel Rail 600mm Long of Jaquar(ACN-1111SM) or Equivalent make etc. complete as per direction of enginer-in-charge. |
| 87 | Providing and fixing concealed 1/2” built-in bath or shower mixer of Roca(RT5A2209C00) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 88 | Providing and fixing Round shower 200 mm shower head With 337 mm wall-mounted shower arm of Roca(RF5B9758C0N) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 89 | Providing and mixing of Self leveling with the use of MYK FloAnn Soloplan -SOM, commercial self smoothing and leveling compound consisting of high quality special cement and selected fillers,with water at rate of 5.5-6.00 Ltr for 25Kg bag of MYK FloAnn Soloplan -SOM, installing at thickness of 3mm using suitable pinrake trowel and notch trowel,finally rolling the surface with spike roller,etc and complete as per manufacturer's specification. [ Mixed density of powder :2gm/cc;Weight of fresh mortar :2.0 Kg / Ltr; Pot Life at 23°C :20 min Approx; Flow life time :15min;Initial setting time :40 min; Final setting time :1Hr;Bal impact hardness :6.5mm;Scratch hardness 1.6mm; Compressive Strength :after 28days approx 4.5N/mm2;Flexural strength at 27°C (ASTM C348) after 24 hrs :1.5N/ mm,after 7 days approx 3N/ mm2;Product confirms to standard; EN13813CT -C15-F-4.5 and dismantling of the same item and removing from site as per direction of Engineer-in-charge complete. |
| 90 | Providing and fixing 2 mm thick recycled PVC slip resistance vinyl sheet flooring with PUR of approved colour & shade of Armstrong range ACCOLADE SAFE PLUS/ polyflor/Forbo for range Prestige or equivalent make having wear resistance of Group 'T' as per EN 660-2 and should have a residual indentation of ≤ 0.10 mm confirming to EN433. The vinyl sheet shall be laid & fixed with any water based adhesive preferrably AROBOND-44 of M/s, colour bond make or VC 31 of M/s Pidilite ind. or any other make as per manufacturer's specification and base should be prepare with self levelling compound of Cement Aggregate additives of thickness 2-3 mm as required and as per direction of Engineer-in-charge complete. |
| 91 | Supplying SS 304 grade matt finish 4 seater waiting chairs of dimensions 1.75m X 0.45m X 0.45 m ,sheet thickness should be min. 1.5 mm, laser cutting should be used, weight not less than 35 kg complete as per direction of engineer-in-charge |
| 92 | Providing and fixing of Wood HPL Merino ZMS SS Toilet Cubicles, Built Type-Modular Brand- using Merino Material-Wood ,size Size-2003 x 900 x 1550 mm (H X W X D) & as per site requirements , Thickness-12 mm Feature-Anti-bacterial, Fire Resistant, Graffiti Resistant, etc Standard Pilaster Thickness-12 mm Series Name-ZMS SS Door Dimension-1750 x 600 mm (H X W) with required all necessary fittings including aluminium of same brand complete as per direction of Engineer-in-charge. ( for semi accessible toilet extra will not be paid for the variation of size as per site requirements complete as per the per direction of Engineer-in-charge ) |
| 93 | Providing and fixing sensor faucet for washbasin of Jaquar brand(SNR-CHR-51033) or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 94 | Providing and fixing mirror of superior glass ( of approved quality and of required shape and size with designed plastic moulded frame of approved make and shade with 6mm thick hard board backing as per the direction of engineer in charge. |
| 95 | Providing and fixing in position at floor to floor (50 mm) water proofing EPDM membrane with all required civil work interms of joint preparation to match existing finishing and all the necessary repairs, accessories complete as per manufacturers specifications , drawings and as per direction of Engineer-in-charge. |
| 96 | Providing and fixing stainlesssteel automatic wall mounted hand dryer of Euronics brand (EH270N)or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 97 | Providing and fixing RMAX automatic sanitary pad machine having 50 pads capacity with compact design coin operated or equivalent make etc. complete as per direction of Engineer-in-Charge. |
| 98 | Attending day to day complaints of sewerage cleaning nature, like opening of floor traps, water closet, sanitary pipe, manholes, gully traps and covered drains etc. by collecting complaints. The authorized worker of the contractor shall get his daily complaints from the J.E. in-charge. The dismantled materials received from the site shall be deposited with the J.E. in-charge by the contractor. Nothing extra shall be paid on account of any T & P etc. payment shall be made asper the attendance register, where daily attendances will be considered & cumulated for one month. (Note:-Minimum Salary of Rs. 23218/- is to be paid to each Sewerman per Month including EPF and ESIC employee part only). |
| 99 | Attending day to day complaints of Carpentery nature, like reparing wooden doors, windows, glass fixing etc. by collecting complaints. The authorized worker of the contractor shall get his daily complaints from the J.E. in-charge. The dismantled materials received from the site shall be deposited with the J.E. in-charge by the contractor. Nothing extra shall be paid on account of any T & P etc. payment shall be made asper the attendance register, where daily attendances will be considered & cumulated for one month. (Note:-Minimum Salary of Rs. 25506/- is to be paid to each Carpenter per Month including EPF and ESIC employee part only). |
| 100 | Attending day to day complaints of plumbing nature, like repairing of pipe, bib cock, stop cock etc.by collecting complaints. The authorized worker of the contractor shall get his daily complaints from the J.E. in-charge. The dismantled materials received from the site shall be deposited with the J.E. in-charge by the contractor. Nothing extra shall be paid on account of any T & P etc. payment shall be made asper the attendance register, where daily attendances will be considered & cumulated for one month. (Note:-Minimum Salary of Rs. 25506/- is to be paid to each Plumber per Month including EPF and ESIC employee part only). |
| 101 | Credit for dismantling Brass Scrab/unserviceable/ C.P. Brass sanitary fittings as per Direction of Engineering-in-charge complete as per direction of Engineer-in-charge. |
| 102 | Credit(deduct) for wooden work like chaukhats of doors and windows and particians, wooden planks etc including all, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete as per direction of Engineer-in-charge. |
| 103 | Modified Estimated Cost after using Correction factor on DSR-2023 on account of GST @ 0.973 |
| 104 | Add Cost Index @ 4.03% on DSR 2023 item. Please Enable Macros to View BoQ information |
