|
| 1 | CIVIL PORTION WORK:- Cleaning and grubbing road land including uprooting vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness |
| 2 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. |
| 3 | Construction of Granular Sub-Base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 4 | Providing and applying tack coat with bitumen emulsion on prepared surface including cleaning of road surface and spraying primer at the rate of 0.20kg/sqm using mechanical means as per clause no.501.5.2, 502 of MoRT&H specification and direction of the EIC |
| 5 | Providing and laying Bituminous Macadam using crushed aggregate of grading-II materials premixed with bitumenous binder, transported to site, laid over a previous prepared surface with hydrostatic paver finisher with sensor control to the required grade and level and alignmentand rolled as per Clause No.-501-6 and 501-7 to achive the desired compaction as per Clause 504 of MoSRT&H Specifications for Road & Bridge works (4th Revision) |
| 6 | Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 7 | P.C.C.M-15 Grade in foundation bed as levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 of MoSRT&H Specifications for Road & Bridge works (Latest Revision). |
| 8 | Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & CRMB-55 grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 9 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 10 | Providing P.C.C M20 Grade cement Concrete |
| 11 | Providing MS Grill in mild steel including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 12 | Painting on concrete surface with two coats of Enamel paint to unplaster concrete surface of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 13 | Painting on concrete surface with two coats of Enamel paint to unplaster concrete surface of approved shade for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 14 | Re-inforced Cement Concrete M-20 mix with stone aggregate 20mm nominal size mechanicaly mixed & vibrated in foundation upto a depth of 1.5m below ground level and 1.5M above ground/bed level for finished item work as per clause No. 1000/1500/1700/2200 of MORT&H specification. |
| 15 | Cover Slab Over Existing Drain |
| 16 | Providing HYSD reinforcement for RCC works in substructure including bending, binding and placing in position for finished item work as per drawing and as per clauses 1000/1600 of MORT&H specification. |
| 17 | Providing weep holes in brick masonary / plain or reinforced concrete abutment with 100mm dia AC pipe |
| 18 | Road marking with Hot applied thermoplastic compound with Reflectorising Glass beads on bituminous surface by providing and laying of hot applied thermoplastic compound 2.5mm thick including Reflectorising glass beads @ 250gms per sqm area thickness of 2.5mm.is exclusive of surface applied glass beads The finished surface to be level uniform and free from streaks and holes as per IRC: 35 |
| 19 | Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973. |
| 20 | Providing retro-reflectorised cautionary, Mandatory and Informatory sign boards as per IRC. 67 made of high intensity grade sheeting vide clause no. 801.3 fixed over aluminium sheeting 1.5mm thick supported on a mild steel angle iron post 75 x 75mm x 6mm size as per approved drawing as per clause no.801.08 of MoRT&H specification and direction of the Engineer-in-charge |
| 21 | 80cm x 60cm size Rectangular (Informatory) |
| 22 | Route Marker Sign(45cm x 60cm) |
| 23 | 90cm size Equilateral Tringle |
| 24 | 60cm size Circular |
| 25 | 90cm high octagon |
| 26 | Hazard Marker(30cm x 90cm) |
| 27 | Single Chevron(60cm x 60cm) in curves Please Enable Macros to View BoQ information |
