|
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of submessible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 4 | i) 2.0 HP Motor suitable for 2000 GPH capacity submerssible pumpset |
| 5 | ii) 3.0 HP Motor suitable for 2000/2500 GPH capacity submerssible pumpset |
| 6 | Providing and fitting fixing of 1500 GPH capacity submersible with 10 stage pump with suitable single phase 2 HP submerssible motor with head of 48.00 mtr DUKE make/VARUNA Make/ and other ISI mark make etc complete in all respect as per direction of the Engineer-in-charge. |
| 7 | Providing & fitting fixing of single phase motor starter unit (with heavy duty 2 pole contactor, relay range 18.0 - 25.0, with volt meter & amps meter) of Havels/BCH/L&T make suitable for 2 HP Submersible motor etc complete as per direction of the Engineer-in-charge. |
| 8 | Supplying and fitting fixing of KIOSK(size:- width 450xlength 1200x height 850 mm) fitted with 4 Nos support Support of 75x75 mm ( 6 mm thick) M.S angle for embedding in 1:2:4 cement concrete base ( size:- 300mm x 300 mm x500 mm ) with proper locking arrangement and coated with anti-corrosive paint ( both inside and outside) including necessary provision for fitting fixing of single phase motor starter, Main switch, Energy meter etc. complete in all respect as per direction of the Engineer - In - Charge. |
| 9 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge.i) 32 Amps |
| 10 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable coforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge.i) 2.50 sqmm |
| 11 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i) 40 mm dia. |
| 12 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in- charge.i) 40 mm dia. |
| 13 | Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cementconforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i) 40 x 40 mm dia |
| 14 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately) as per CPWD specification and direction of the Engineer - in - charge.A. Class - 3 ( working pressure 6.0 kg / cm2).i. 40 mm OD |
| 15 | Providing and laying of flexible PVC pipe (Conforming to IS:7634) complete as per specification and direction of the Engineer-in-charge (Cost of earth work and fittings will be paid separately). |
| 16 | i) 15 mm dia |
| 17 | ii) 25 mm dia |
| 18 | Providing and fixing G.I Nipple of medium class as per CPWD specification and direction of the Engineer-in-charge.i) 15 mm dia 75 mm long |
| 19 | Providing and fixing C.I Bib cock (long handle) as per CPWD specification and direction of the Engineer-in-charge.i) 15 mm dia |
| 20 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1000 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per direction of the Engineer - in - ChargeA) for UPVC pipes in new work a) In all kinds of soil i) For pipes not exceeding 40 mm dia Please Enable Macros to View BoQ information |
