|
| 1 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and remming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within lead of 50m. (2.8.1-2.36) |
| 2 | Providing and laying sand filling/ watering, ramming consolidation and dressing complete including loading unloading and carriage of material from C&D plant to site complete in all respect as per the directions of Engineer-In-Charge. |
| 3 | Carriage of earth by mechanical transport including loading, unloading Lead of 2 km complete in all respect to the entire satisfaction of the Engineer-In-Charge. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 |
| 5 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 6 | 15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1) |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished ,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm (DSR 8.2.2.1) |
| 8 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of quired size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (D.S.R 10.28). |
| 9 | Providing and fixing of fiberglass cartoon figures with sculpture of size upto 6'6”(Height)x5'0\\"(Width)x1'6\\"(Thickness) including painting with good quality paint and gloss coating including fixing on existing platform to the entire satisfaction engineer in charge. Cost includes all type of labour cost, material cost, transportation cost etc. |
| 10 | Providing and fixing of fiberglass figure of size upto 2’6\\"(Height)x1'6\\"(Width)x1'6\\"(Thickness) fixed on stainless steel pipe of length upto 9' and dia upto 1\\" including painting with good quality paint and gloss coating including fixing on existing platform to the entire satisfaction engineer in charge. Cost includes all type of labour cost, material cost, transportation cost etc. |
| 11 | SITC of 12-15W decorative LED Spike Light, 2700-3000k, THD<10%, P.F ≥0.95, CRI >70 having high quality toughened glass in clear finish for uniform light distribution, operating voltage range 140V-270V. The frame should be of pressure die cast aluminium housing, powder coated. The housing provides IP66 protection for high reliability in outdoor application. The conncetor should be IP 67. The job includes fixing the LED light on suitable foundation, fixing IP 66/67 (weather proof) junction box for outdoor installation with knockouts for cable entry & covering the whole assembly with MS wire mesh cover, properly fixed in foundation, for protection of LED fitting.Twinkle. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 12 | SITC of 18-20W projector light uplighter 2700-3000k, THD<10%, P.F ≥0.95, CRI >70 having high quality toughened glass in clear finish for uniform light distribution, operating voltage range 140V-270V & IP 68 water proof connectors. The frame should be of pressure die cast aluminium housing and powder coated. The housing provides IP66 protection for high reliability in outdoor application. The job includes fixing the LED uplighter on the floor and fixing IP 66/67 (weather proof) junction box for outdoor installation with knockouts for cable entry & doing the required electricity connection.Make: Twinkle. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 13 | Supply & laying of ISI marked 2 core 10 mm sq armoured cable loose in trench/pipe: -Supply & laying of ISImarked 2 core 10 mm sq Aluminium conductor armoured cable of make Havells conforming IS:1554 (Pt.1) amended. The cable shall be laid as per DSR Code 1.7 MV CBPIP (external). The work shall be executed to the entire satisfaction of Engineer-in-Charge |
| 14 | Supply & Laying of DWC pipe 50/63mm with out hand bockey:-Supply and laying of 50/63 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Rex. The pipe should be laid 75 cm below ground/road level by digging the ground or cutting the road/paver blocks upto required level & laying of DWC pipe for laying L.T. (up to 1.1 KV grade) cables etc. including cost of digging and refilling of pits/Trench complete in all respects to the entire satisfaction of Engineer-in-Charge of work. |
| 15 | Supply & Laying of DWC pipe 50/63mm with hand bockey:-Supply and laying of 50/63 mm (I/D& O/D) Double Wall Corrugated (DWC) High Density Polyethylene pipe (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm conforming to IS 14930 (P-II) and PSEN-50086 (P-I & II) of Make Rex. The pipe should be laid 3 feet below ground/road level with hand bockey without cutting of road for laying cables etc. including cost of digging and refilling of pits complete in all respects to the entire satisfaction of Engineer-in-Charge |
| 16 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required ISI marked.. Size 20mm |
| 17 | Supplying and drawing 3x1.5 mm2 FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Make: Havells. |
| 18 | Supplying and fixing one row 6 module double door IP 65 outdoor type MCB distribution board, 240 V, on surface/ recess, complete with connections, Make- Hager |
| 19 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole of make ABB |
| 20 | Supplying and Erection of DP 32 amps. rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles alongwith enclosure MCB DB complete with connections, testing & commissioning etc. as required Double Pole 32 Amps/ABB Make. |
| 21 | G.I. Earth pipe electrode with salt/ Charcoal:-Supply and laying of earth electrode made out of ISI marked 'B' class G.I. pipe 4.5 Mtr. long 40 mm dia including accessories. GI pipe electrode shall be cut tapered at the bottom, and provided with holes of 12mm dia, drilled not less than 7.5 cm from each other upto 2 Mtr. of length from bottom. The earth electode shall be laid in ground after boring as per CPWD specifications complete in all respect and to the entire satisfaction of the engineer-in-charge. |
| 22 | P/F 6 SWG GI earth wire in pipe: Providing & laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode, as required. Please Enable Macros to View BoQ information |
