Tender For Balance Works Of The Package Of ‘Design, Build Of Raw Water Intake Well, Water Treatment Plant, Reservoir, Transmission Main For Indpur And Taldangra Block In Bankura Including Operation & Maintenance For 2 Years Under Package Bkp 01 (Sche, Bankura-West Bengal

TDR : 55827423

Tender Notice
Corrigendum Details
BOQ

28 Days Left

Bankura , West Bengal

Tender Brief : Corrigendum : Tender For Balance Works Of The Package Of ‘Design, Build Of Raw Water Intake Well, Water Treatment Plant, Reservoir, Transmission Main For Indpur And Taldangra Block In Bankura Including Operation & Maintenance For 2 Years Under Package Bkp 01 (Sche

Document Fees
Refer document

EMD
₹ 1.0 /-

Tender Value
Refer document

Submission Date
25-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	19-06-2026	NIET NO- 01 of the FY 2026-2027 of the SE, PIU-Bankura, WBDWSIP, PHE Dte.(SL.NO-01)....	Other	25-07-2026
2	19-06-2026	NIET NO- 01 of the FY 2026-2027 of the SE, PIU-Bankura, WBDWSIP, PHE Dte.(SL.NO-01)...	Other	25-07-2026
3	19-06-2026	NIET NO- 01 of the FY 2026-2027 of the SE, PIU-Bankura, WBDWSIP, PHE Dte.(SL.NO-01)..	Other	25-07-2026
4	19-06-2026	NIET NO- 01 of the FY 2026-2027 of the SE, PIU-Bankura, WBDWSIP, PHE Dte.(SL.NO-01).	Other	25-07-2026
5	19-06-2026	NIET NO- 01 of the FY 2026-2027 of the SE, PIU-Bankura, WBDWSIP, PHE Dte.(SL.NO-01)	Other	25-07-2026

Name of Work:- Balance Works of the package of ‘Design, Build of Raw Water Intake Well, Water Treatment Plant, Reservoir, Transmission Main for Indpur and Taldangra Block in Bankura including Operation & Maintenance for 2 years under package BKP 01 (SCHEDULE-1 : Plant Supplied from Outside the Employers Country)

Sl. No.	Item Description
1	Raw water Intake Structure (Pile Supported) cum pump house including approach bridge as per scope and technical specifications.
2	Mechanical Works
3	Vertical turbine pumps, column pipe assembly and all accessories and drive motors of duty points / rating based on the minimum requirements as described in the technical specifications and requirements or as required all complete as per scope of works.
4	Pipes, fittings and specials, valves on pump discharge pipe including swing check valves, butterfly valves, sluice valves, air release valves and other apputenances with necessary provision for auto / manual control and operation as described in the technical specifications and requirements or as required all complete as per scope of works (Supply partially made by Oter Agency)
5	EOT Cranes with accessories as described in the technical specifications and requirements or as required all complete as per scope of works
6	Miscellaneous equipment including ventilation system, fire extinguishers etc as described in the technical specifications and requirements or as required all complete as per scope of works (excluding Onshore Tranformer and DG Yard/Substation Building)
7	Any other item and sub items not specified in the above but required to complete the work as described in the technical specifications and requirements or as required all complete as per scope of works
8	Electrical Work
9	LT MCC Switchgear for VT Pump-motor, Soft starters , LPBS, Miscellaneous panels including lighting panels, Aux. as described in the technical specifications and revised requirements for Intake Pump House as required all complete as per scope of works.
10	Complete lighting system in all the civil structures and buildings (including approach bridge) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables as described in the technical specifications and requirements or as required all complete as per scope of works (excluding Onshore Tranformer and DG Yard/Substation building)
11	Supply of Complete cabling system with LT, instrumentation and control cables, cable trays (Including Cable Laying on approach bridge) and accessoriesas described in the technical specifications and requirements or as required all complete as per scope of works
12	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings as described in the technical specifications and requirements all complete as per scope of works.(excluding Onshore Tranformer and DG Yard/Substation building)
13	Any other item and sub items not specified in the above but required to be procured to complete the works
14	Instrumentation and Control Work: Supply of Instrumentation and SCADA Control Equipment (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment) as described in the technical specifications and requirements or as required all complete as per scope of works.Supply of Redundant SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast as described in the technical specifications and requirements or as required all complete as per scope of works. Field Instrument & Cabling System for Raw Water Intake PS as per technical specifications and requirements all complete as per scope of works.
15	Supply of Electromagnetic Flowmeter in Common Header pipe 800 NB
16	Supply of Pressure Transmitter (Smart Electronic 2-Wire type 4-20 mA DC Output load with local LCD Display and HART Supported, Accuracy +1% of span or better reaptibilty of ±1% of span.
17	.Supply of Radar Level Tranmitter (Range 20m)
18	Supply of Pressure gauge ( Bourdon/Bellow/Diaphram Operation, minimum 150 mm dial size, MOC- AISI 360SS, Movement AISI 316SS, Case material SS 314,IP -65, accuracy ±1%, 0-16 Kg/cm²)
19	Supply of Instrumentation Cabling system including all GI perforated cable trays, prefabricated GI bends and Tees for cable trays with all nut and bolts, etc. as per employers requirements.
20	Water Treatment Plant
21	Mechanical Work
22	Stilling Chamber and Parshall Flume: Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, valve operating platforms etc, Bypass pipe with valves, fittings and specials, Motorised drop gate/sluice gates, with provision for auto/manual operation, at the exit of Parshall flume.
23	Flash Mixer: Agitator/Flash Mixers complete with motor assembly, reduction gear, base frame etc, Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Draining pipe with motorised valves with provision for auto/manual control, connecting pipes, specials, fittings for draining to sludge collection sump, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, operating platforms etc.
24	Clariflocculator
25	Clarifier Bridge Assembly alongwith flocculators including support, clips, etc, Metal works including handrails, step irons, steel ladders, operating platforms etc.
26	Telescopic sludge bleeding arrangement, Bottom Sludge scraping arrangement complete with motor assembly, reduction gear, scraper blades etc, Sludge extraction piping with motorised isolation valves, fittings and specials, dismantling joints, including extraction header pipes.
27	Clarified Water collector arrangement including weir plates
28	Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks
29	Rapid Sand Filters, Pipe gallery and Filter Annex Building
30	Filter Sand and Supporting gravel pack, Under drain systems with filter nozzles, Wash water drain troughs, Motoried inlet gates or valves with provision for auto/manual control, Motorised Filtered water outlet valves with provision for auto/manual control, Motorised wash water drain gates or valves with provision for auto/manual control, Motorised Air Scour valves with provision for auto/manual control, Filtered water Flow meters (ROF and LOF) with provision for relay of the data, All necessary valves for filter drain and Air release with motorised control and provision for auto/manual control, Piping including fittings, dismantling joints and specials, Backwash water flow measuring and control system including flow control valve and associate piping, Sump drain pumps with piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders etc.
31	Air Blower of required capacity along with silencer, motor, suction filter, NRV, discharge isolation valve, V-belt and pulley, acoustic hood, pressure gauge, pressure switch and common base frame etc.
32	Miscellaneous equipment including ventilation system, fire extinguishers etc.
33	EOT monorail hoist with accessories for handling of blower system
34	Chemical House: Mixer of Alum mixing/storage tank with Alum dilution trays, Chemical transfer/dosing pumps for Alum solution with suction/delivery pipes, valve,ﬁttings and specials , Alum dosage chambers with pipes, motorised valves, ﬁttings and specials, Alum dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage point with a diﬁuser, Polymer solution preparation and dosage pump with suction and delivery pipes, motorised valves, fittings and specials, Polymer dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage points with diffusers, All other pipes, motorised valves, ﬁttings and specials for utility water supply, overﬂow and drain in the chemical house, Sump drain pumps with piping, Metal works including handrails, step irons, steel ladders, hatches, Ventilation, ﬁre extinguishers, dust collectors, exhaust fans of lime powder feeding, Weighing Machine of 1000 kg capacity etc. as per technical specification and requirements all complete
35	Chlorine Building
36	Weigh-scale suitable for chlorine cylinders, Vacuum type Chlorinator for pre-chlorination, Vacuum type chlorinator for post-Chlorination, Chlorine ejector for pre and post chlorination, Utility water boosting pumps and motors with pipes, valves, fittings and specials, Chlorine gas and solution pipes, valves, fittings and specials from the chlorine building upto dosage points (pre and post chlorination), Safety Equipment as per technical specification and requirements all complete
37	Chlorine cylinders / tonners as required as per technical specification and requirements all complete
38	Filter Backwash arrangement: Horizontal Centrifugal pumps including motors and piping for pumping to Overhead reservoir, Horizontal pumps including motors and piping for surface wash of filter beds and clariflocculator and motorized inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. as per technical specification and requirements all complete.
39	Sludge sump cum Pump House: Motorised inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. , Horizontal centrifugal pump and motor with motorised valves, dismantling joints, pipings,fittings etc for conveyance of sludge to Sludge Lagoon, as per technical specification and requirements all complete.
40	Plant piping: Interconnection pipe between inlet chamber, ﬂash mixing tanks including pipes, ﬁttings, dismantling joints, and specials, Interconnection between ﬂash mixing tanks and Clariflocculator including pipes, ﬁttings, dismantling joints and specials, Interconnection between Clariflocculator and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Interconnection between rapid sand filters and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Sludge drain pipe between the treatment units upto Sludge holding tanks including pipes, specials, dismantling joints, Interconnecting pipes between Sludge Sump, sludge Lagoon as per technical specification and requirments all complete.
41	Clear Water Reservoir cum Pumping Station
42	Horizontal Centrifugal pumps including motors as specified in the technical specification all complete.
43	Pipes, fittings and specials, Valves on pump discharge pipe including check valves, butterfly valves, sluice valves, air release valve and other ancillary valves with necessary provision for auto/manual control of with necessary protection against thrust force, Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers, Dewatering pump with piping, Surge Protection System including ventilation arrangement, etc.
44	EOT Crane with accessories
45	Miscellaneous equipment including ventilation system, fire extinguishers etc.
46	Miscellanous Equipments and Furniture
47	Water quality analyzer rack, Laboratory equipment /apparatus including Laboratory reagent, Laboratory glassware's and reagents
48	Sampling table complete with pumps, pipelines, valves etc, Sampling pumps with piping from sampling points to laboratory
49	Air conditioning, ventilation system along with rain protection cowl and bird screen, fire extinguishers etc.
50	Furniture for Administrative Building, Chemical House (Laboratory furniture), Chlorination Building, Filter Annex Building, Staff Quarter, Guard Room.
51	Any other item and sub items not specified in the above but required to complete the works
52	Electrical work
53	Power substation- 33KV Indoor switchboard
54	33KV/0.433 KV transformers with OLTC and Automatic Voltage Regulator
55	415V indoor switch board/MCC/PDB, Soft starters, Capacitors, LPBS, bus-duct, Electrical control panel set for filter bed system, Electrical control panel set for filter bed system, 110 V Ni-Cd batteries including battery chargers and Distribution panels
56	Complete lighting system in all the civil structures and buildings (including street poles on approach road, interplant roads and pathways and adequate number of high mast lighting arrangement with lightning arrestors) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables, Miscellaneous panels including lighting panels
57	Complete cabling system with HT, LT, instrumentation and control cables, cable trays and accessories
58	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings.
59	415V 200KVA DG set with AMF panel & accessories.
60	Any other item and sub items not specified in the above but required to complete the works
61	Instrumentation and Automation
62	SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast
63	UPS for SCADA and monitring, Surveillance and Telephone system etc with UPS panel
64	Main CPU Controller Panel with Remote I/O PLC panel, RTU for RWPS, CWPS, substation, different WTP units, desktop PC for local HMI, at specified locations including PLC/ICP with software and hardware with complete ancillary equipment.
65	Instruments like flow meter with transmitter and smart remote display,level sensor with local display and trasmitter, Water quality measurement equipment including analyzer, sensor, local display, necessary weather protection enclosure, transmitter complete with all cables and accessories, Pressure transmitter, Instrumentation and control cables including cable trays, racks, ducts, OFC, LAN cable, conduit cable laying pipe, multiport switch, etc.
66	IP EPABX Telephone system, IP PA Emergency Announcement system, CCTV monitoring system for WTP and all other remote areas.
67	Fiber Optic L2 Switch communication system betweenremote locations and WTP through Armoured Single Mode OFC with HDPE pipe conduit complete with enclosure, and all accessories.
68	Any other item and sub items not specified in the above but required to complete the works.
69	Clear Water Transmission main
70	Supply of (MS, DI) Pipes, Specials, Fittings and Pipeline appurtenances at site including transportation, insurance etc. complete with all accessories from WTP to Intermediate Ground Level Storage Reservoir as per technical specificaiton and requirments.
71	Intermediate Ground Level Storage Reservoir
72	All piping and appurtenances,Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers including ventilation arrangement all complete as required as per technical specificaiton and requirments.
73	Raw water Intake Structure (Pile Supported) cum pump house including approach bridge as per scope and technical specifications.
74	Mechanical Works
75	Vertical turbine pumps, column pipe assembly and all accessories and drive motors of duty points / rating based on the minimum requirements as described in the technical specifications and requirements or as required all complete as per scope of works.
76	Pipes, fittings and specials, valves on pump discharge pipe including swing check valves, butterfly valves, sluice valves, air release valves and other apputenances with necessary provision for auto / manual control and operation as described in the technical specifications and requirements or as required all complete as per scope of works (Supply partially made by Oter Agency)
77	EOT Cranes with accessories as described in the technical specifications and requirements or as required all complete as per scope of works
78	Miscellaneous equipment including ventilation system, fire extinguishers etc as described in the technical specifications and requirements or as required all complete as per scope of works (excluding Onshore Tranformer and DG Yard/Substation Building)
79	Any other item and sub items not specified in the above but required to complete the work as described in the technical specifications and requirements or as required all complete as per scope of works
80	Electrical Work
81	LT MCC Switchgear for VT Pump-motor, Soft starters , LPBS, Miscellaneous panels including lighting panels, Aux. as described in the technical specifications and revised requirements for Intake Pump House as required all complete as per scope of works.
82	Complete lighting system in all the civil structures and buildings (including approach bridge) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables as described in the technical specifications and requirements or as required all complete as per scope of works (excluding Onshore Tranformer and DG Yard/Substation building)
83	Supply of Complete cabling system with LT, instrumentation and control cables, cable trays (Including Cable Laying on approach bridge) and accessoriesas described in the technical specifications and requirements or as required all complete as per scope of works
84	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings as described in the technical specifications and requirements all complete as per scope of works.(excluding Onshore Tranformer and DG Yard/Substation building)
85	Any other item and sub items not specified in the above but required to be procured to complete the works
86	Instrumentation and Control Work: Supply of Instrumentation and SCADA Control Equipment (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment) as described in the technical specifications and requirements or as required all complete as per scope of works.Supply of Redundant SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast as described in the technical specifications and requirements or as required all complete as per scope of works. Field Instrument & Cabling System for Raw Water Intake PS as per technical specifications and requirements all complete as per scope of works.
87	Supply of Electromagnetic Flowmeter in Common Header pipe 800 NB
88	Supply of Pressure Transmitter (Smart Electronic 2-Wire type 4-20 mA DC Output load with local LCD Display and HART Supported, Accuracy +1% of span or better reaptibilty of ±1% of span.
89	.Supply of Radar Level Tranmitter (Range 20m)
90	Supply of Pressure gauge ( Bourdon/Bellow/Diaphram Operation, minimum 150 mm dial size, MOC- AISI 360SS, Movement AISI 316SS, Case material SS 314,IP -65, accuracy ±1%, 0-16 Kg/cm²)
91	Supply of Instrumentation Cabling system including all GI perforated cable trays, prefabricated GI bends and Tees for cable trays with all nut and bolts, etc. as per employers requirements.
92	Water Treatment Plant
93	Mechanical Work
94	Stilling Chamber and Parshall Flume: Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, valve operating platforms etc, Bypass pipe with valves, fittings and specials, Motorised drop gate/sluice gates, with provision for auto/manual operation, at the exit of Parshall flume.
95	Flash Mixer: Agitator/Flash Mixers complete with motor assembly, reduction gear, base frame etc, Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Draining pipe with motorised valves with provision for auto/manual control, connecting pipes, specials, fittings for draining to sludge collection sump, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, operating platforms etc.
96	Clariflocculator
97	Clarifier Bridge Assembly alongwith flocculators including support, clips, etc, Metal works including handrails, step irons, steel ladders, operating platforms etc.
98	Telescopic sludge bleeding arrangement, Bottom Sludge scraping arrangement complete with motor assembly, reduction gear, scraper blades etc, Sludge extraction piping with motorised isolation valves, fittings and specials, dismantling joints, including extraction header pipes.
99	Clarified Water collector arrangement including weir plates
100	Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks
101	Rapid Sand Filters, Pipe gallery and Filter Annex Building
102	Filter Sand and Supporting gravel pack, Under drain systems with filter nozzles, Wash water drain troughs, Motoried inlet gates or valves with provision for auto/manual control, Motorised Filtered water outlet valves with provision for auto/manual control, Motorised wash water drain gates or valves with provision for auto/manual control, Motorised Air Scour valves with provision for auto/manual control, Filtered water Flow meters (ROF and LOF) with provision for relay of the data, All necessary valves for filter drain and Air release with motorised control and provision for auto/manual control, Piping including fittings, dismantling joints and specials, Backwash water flow measuring and control system including flow control valve and associate piping, Sump drain pumps with piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders etc.
103	Air Blower of required capacity along with silencer, motor, suction filter, NRV, discharge isolation valve, V-belt and pulley, acoustic hood, pressure gauge, pressure switch and common base frame etc.
104	Miscellaneous equipment including ventilation system, fire extinguishers etc.
105	EOT monorail hoist with accessories for handling of blower system
106	Chemical House: Mixer of Alum mixing/storage tank with Alum dilution trays, Chemical transfer/dosing pumps for Alum solution with suction/delivery pipes, valve,ﬁttings and specials , Alum dosage chambers with pipes, motorised valves, ﬁttings and specials, Alum dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage point with a diﬁuser, Polymer solution preparation and dosage pump with suction and delivery pipes, motorised valves, fittings and specials, Polymer dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage points with diffusers, All other pipes, motorised valves, ﬁttings and specials for utility water supply, overﬂow and drain in the chemical house, Sump drain pumps with piping, Metal works including handrails, step irons, steel ladders, hatches, Ventilation, ﬁre extinguishers, dust collectors, exhaust fans of lime powder feeding, Weighing Machine of 1000 kg capacity etc. as per technical specification and requirements all complete
107	Chlorine Building
108	Weigh-scale suitable for chlorine cylinders, Vacuum type Chlorinator for pre-chlorination, Vacuum type chlorinator for post-Chlorination, Chlorine ejector for pre and post chlorination, Utility water boosting pumps and motors with pipes, valves, fittings and specials, Chlorine gas and solution pipes, valves, fittings and specials from the chlorine building upto dosage points (pre and post chlorination), Safety Equipment as per technical specification and requirements all complete
109	Chlorine cylinders / tonners as required as per technical specification and requirements all complete
110	Filter Backwash arrangement: Horizontal Centrifugal pumps including motors and piping for pumping to Overhead reservoir, Horizontal pumps including motors and piping for surface wash of filter beds and clariflocculator and motorized inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. as per technical specification and requirements all complete.
111	Sludge sump cum Pump House: Motorised inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. , Horizontal centrifugal pump and motor with motorised valves, dismantling joints, pipings,fittings etc for conveyance of sludge to Sludge Lagoon, as per technical specification and requirements all complete.
112	Plant piping: Interconnection pipe between inlet chamber, ﬂash mixing tanks including pipes, ﬁttings, dismantling joints, and specials, Interconnection between ﬂash mixing tanks and Clariflocculator including pipes, ﬁttings, dismantling joints and specials, Interconnection between Clariflocculator and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Interconnection between rapid sand filters and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Sludge drain pipe between the treatment units upto Sludge holding tanks including pipes, specials, dismantling joints, Interconnecting pipes between Sludge Sump, sludge Lagoon as per technical specification and requirments all complete.
113	Clear Water Reservoir cum Pumping Station
114	Horizontal Centrifugal pumps including motors as specified in the technical specification all complete.
115	Pipes, fittings and specials, Valves on pump discharge pipe including check valves, butterfly valves, sluice valves, air release valve and other ancillary valves with necessary provision for auto/manual control of with necessary protection against thrust force, Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers, Dewatering pump with piping, Surge Protection System including ventilation arrangement, etc.
116	EOT Crane with accessories
117	Miscellaneous equipment including ventilation system, fire extinguishers etc.
118	Miscellanous Equipments and Furniture
119	Water quality analyzer rack, Laboratory equipment /apparatus including Laboratory reagent, Laboratory glassware's and reagents
120	Sampling table complete with pumps, pipelines, valves etc, Sampling pumps with piping from sampling points to laboratory
121	Air conditioning, ventilation system along with rain protection cowl and bird screen, fire extinguishers etc.
122	Furniture for Administrative Building, Chemical House (Laboratory furniture), Chlorination Building, Filter Annex Building, Staff Quarter, Guard Room.
123	Any other item and sub items not specified in the above but required to complete the works
124	Electrical work
125	Power substation- 33KV Indoor switchboard
126	33KV/0.433 KV transformers with OLTC and Automatic Voltage Regulator
127	415V indoor switch board/MCC/PDB, Soft starters, Capacitors, LPBS, bus-duct, Electrical control panel set for filter bed system, Electrical control panel set for filter bed system, 110 V Ni-Cd batteries including battery chargers and Distribution panels
128	Complete lighting system in all the civil structures and buildings (including street poles on approach road, interplant roads and pathways and adequate number of high mast lighting arrangement with lightning arrestors) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables, Miscellaneous panels including lighting panels
129	Complete cabling system with HT, LT, instrumentation and control cables, cable trays and accessories
130	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings.
131	415V 200KVA DG set with AMF panel & accessories.
132	Any other item and sub items not specified in the above but required to complete the works
133	Instrumentation and Automation
134	SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast
135	UPS for SCADA and monitring, Surveillance and Telephone system etc with UPS panel
136	Main CPU Controller Panel with Remote I/O PLC panel, RTU for RWPS, CWPS, substation, different WTP units, desktop PC for local HMI, at specified locations including PLC/ICP with software and hardware with complete ancillary equipment.
137	Instruments like flow meter with transmitter and smart remote display,level sensor with local display and trasmitter, Water quality measurement equipment including analyzer, sensor, local display, necessary weather protection enclosure, transmitter complete with all cables and accessories, Pressure transmitter, Instrumentation and control cables including cable trays, racks, ducts, OFC, LAN cable, conduit cable laying pipe, multiport switch, etc.
138	IP EPABX Telephone system, IP PA Emergency Announcement system, CCTV monitoring system for WTP and all other remote areas.
139	Fiber Optic L2 Switch communication system betweenremote locations and WTP through Armoured Single Mode OFC with HDPE pipe conduit complete with enclosure, and all accessories.
140	Any other item and sub items not specified in the above but required to complete the works.
141	Clear Water Transmission main
142	Supply of (MS, DI) Pipes, Specials, Fittings and Pipeline appurtenances at site including transportation, insurance etc. complete with all accessories from WTP to Intermediate Ground Level Storage Reservoir as per technical specificaiton and requirments.
143	Intermediate Ground Level Storage Reservoir
144	All piping and appurtenances,Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers including ventilation arrangement all complete as required as per technical specificaiton and requirments.
145	Raw water Intake Structure (Pile Supported) cum pump house including approach bridge.Bathymetry survey in the reservoir area to identify the most viable location of the raw water intake sump and its surroundings by measurement of depth of water level including preparation of detailed bed contour map complete as per technical requirements and specification all complete as per scopeof work.
146	Geotechnical exploration by boring at required location for identification of strata, collection of samples for detailed investigation in laboratory and submission of the exploration report,including recommendation for type of structure and bearing capacity at various depths as per technical requirements and specification all complete as per scope of work.
147	Topographical and Contour / level survey work using total station or any other instrument along the alignment of raw water transmission main complete as per technical requirements and specification all complete as per scope of work.
148	Planning, designing, preparation of site layout plan, construction drawings/ other drawings/including submission of all supporting design calculations of work inclusive of all design and drawings and other allied works. and cost of any software that might be required to carry out the design including but not limited to the following: (a) Design basis report, (b) Selection of Electrical-Mechanical equipment (pumps, motors, valves, cranes etc) including determination of economic diameter of transmission main including surge analysis, (c) General arrangement of raw water intake sump and pumping station, (d) Make, design parameter, drawings and specifications of equipment for supply items, (e) General layout of the pipes, electrical system etc (f) Preparation of architectural and MEP drawings (g) Structural designs and drawings for all Civil Works. The scope shall also include validation of the design & drawings already reviewed and approved by the Employer's Representative.
149	Planning, designing of all Mechanical works
150	Planning, designing of all Electrical works
151	Planning, designing of Instrumentation works and SCADA, Telecommunication and Surveillance system
152	Raw Transmission Main
153	Geotechnical exploration by boring at required location for identification of strata, collection of samples for detailed investigation in laboratory and submission of the exploration report,including recommendation for type of structure and bearing capacity at various depths as per technical requirements and specification all complete as per scope of work including soil resistivity work
154	Topographical and Contour / level survey work using total station or any other instrument along the alignment of raw water transmission main complete as per technical requirements and specification all complete as per scope of work.
155	Planning, designing, preparation of site layout plan, construction drawings/ other drawings/including submission of all supporting design calculations of work inclusive of all design and drawings and other allied works. and cost of any software that might be required to carry out the design including but not limited to the following: (a) Design basis report, (b) Finalization of route of pipeline, (c) Detailed design of the transmission main including surge analysis, (d) Layout plan and longitudinal section of the pipeline showing location of valves pipeline appurtenances and (e) Design of pipe bridges, including approach bridge to the Intake, thrust blocks, pipe supporting structures any other pipe appurtenant structures as might be required including preparation of detailed working drawings all complete.The scope shall also include validation of the design & drawings already reviewed and approved by the Employer's Representative.
156	Water Treatment Plant
157	Topographical survey work with total station or any other instrument of total area of the proposed WTP and CWR and its surroundings including spot levels of the area by formation of 5m grid.
158	Geotechnical exploration by boring at the location of proposed water treament plant for identification of strata, collection of samples for detailed investigation in laboratory and submission of the exploration report including Soil resistivity test.
159	Sampling and Raw water quality analysis from the reservoir site to assess the water quality requirements as per technical requirements and specification complete as per scope of work.
160	Planning, designing, preparation of site layout plan, construction/ other drawings/including submission of all supporting design calculations of work and approval by the Employer's Representative. The rate should be inclusive of all design and other allied works. and cost of any software that might be required to carry out the design including the following: (a) Design basis report, (b) Process and hydraulic design, HFD, plant layout drawing, general arrangement of individual units (c) Water treatment plant layout and hydraulic flow diagram (d) P&ID, Plant control and operation philosophy, (e) Selection of all the equipment/ pumping plant, design parameters, drawings and specifications of equipment as per make of supply items (f) Preparation of architectural and MEP drawings, (g) Structural designs and drawings (h) Process design etc including all associated Civil Works. The scope shall also include validation of the design & drawings already reviewed and approved by the Employer's Representative.
161	Planning, designing of all Mechanical works
162	Planning, designing of all Electrical works
163	Planning, designing of Instrumentation works and SCADA, Telecommunication and Surveillance system.
164	Clear water transmission main
165	Topographical and Contour / level survey work using total station or any other instrument along the alignment of raw water transmission main complete as per technical requirements and specification all complete as per scope of work.
166	Geotechnical exploration by boring at required location for identification of strata, collection of samples for detailed investigation in laboratory and submission of the exploration report,including recommendation for type of structure and bearing capacity at various depths as per technical requirements and specification all complete as per scope of work including Soil resistivity test.
167	Planning, designing, preparation of site layout plan, construction drawings/ other drawings/including submission of all supporting design calculations of work inclusive of all design and drawings and other allied works. and cost of any software that might be required to carry out the design including but not limited to the following: (a) Design basis report, (b) Finalization of route of pipeline, (c) Detailed design of the transmission main including surge analysis, (d) Layout plan and longitudinal section of the pipeline showing location of valves pipeline appurtenances and (e) Design of pipe bridges, including approach bridge to the Intake, thrust blocks, pipe supporting structures any other pipe appurtenant structures as might be required including preparation of detailed working drawings all complete. The scope shall also include validation of the design & drawings already reviewed and approved by the Employer's Representative.
168	Detail Design, Drawing for laying of Pipe by trenchless methods including preparation of drawings as maybe required as per technical requirements and specification all complete as per scope of work.
169	Intermediate Ground Level Storage Reservoir
170	Topographical survey work with total station of total area of the proposed Intermediate GLSR and its surroundings including spot levels of the area by formation of 5m grid.
171	Geotechnical exploration by boring at required location for identification of strata, collection of samples for detailed investigation in laboratory and submission of the exploration report,including recommendation for type of structure and bearing capacity at various depths as per technical requirements and specification all complete as per scope of work.
172	Planning, designing, preparation of site layout plan, construction/ other drawings/including submission of all supporting design calculations of work and approval by the Employer's Representative. The rate should be inclusive of all design and other allied works. and cost of any software that might be required to carry out the design including but not limited to the following: (a) Design basis report, (b) General Layout drawing as per technical requirements and specification all complete as per scope of work., (c) Make, design parameter, drawings and specifications of equipment for supply items, (d) General layout / General arrangment drawings, (e) Preparation of architectural and MEP drawings (if required), (f) Detailed Structural designs and drawings for all associated Civil Works. The scope shall also include validation of the design & drawings already reviewed and approved by the Employer's Representative.
173	Preparation of the following item for each of the components (from 1 to 5) as listed above
174	As - Built Drawings
175	Installation, Operation and Maintenance Manual(s)
176	Any other items related to Survey, Investigation and Design which are necessary for completion of the Works.
177	Raw water Intake arrangement cum pump house including approach bridge.Civil Works -
178	Construction of Raw water Intake arrangement as per technical specification and requirments all complete as per scope of work.
179	Construction of pumphouse including all enabling Civil works as per tender specification and requirements all complete as per scope of work including Sanitary and Plumbing works.
180	Construction of approach bridge as per technical specification and requirments all complete as per scope of work.
181	Construction of cable tranch from bridge to substation as per technical specification and requirments.
182	Any other item and sub items not specified in the above but required to complete the works.
183	Mechanical work (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment).
184	Vertical turbine pumps, column pipe assembly and all accessories and drive motors of duty points / rating based on the minimum requirements as described in the technical specifications and requirements all complete
185	Pipes, fittings and specials, valves on pump discharge pipe including swing check valves, butterfly valves, sluice valves, air release valve and other apputenances with necessary provision for auto / manual control and operation as described in the technical specifications and requirements or as required all complete as per scope of works.
186	EOT Cranes with accessories as described in the technical specifications and requirements or as required all complete as per scope of works.
187	Miscellaneous equipment including ventilation system, fire extinguishers etc.
188	Any other item and sub items not specified in the above but required to complete the work.
189	Electrical Work (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment)
190	LT MCC Switchgear for VT Pump-motor, Soft starters , LPBS, Miscellaneous panels including lighting panels, Aux. as described in the technical specifications and revised requirements for Intake Pump House as required all complete as per scope of works.
191	Complete lighting system in all the civil structures and buildings (including approach bridge) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables as described in the technical specifications and requirements or as required all complete as per scope of works. (excluding Onshore Tranformer and DG Yard/Substation building)
192	Installation of Complete cabling system with LT, instrumentation and control cables, cable trays (Including Cable Laying on approach bridge) and accessoriesas described in the technical specifications and requirements or as required all complete as per scope of works.
193	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings as described in the technical specifications and requirements or as required all complete as per scope of works.(excluding Onshore Tranformer and DG Yard/Substation building)
194	Any other item and sub items not specified in the above but required to complete the works as described in the technical specifications and requirements or as required all complete as per scope of works.
195	Instrumentation and SCADA Control Equipment (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment) as described in the technical specifications and requirements or as required all complete as per scope of works.
196	Installation, Testing and commissioning of Redundant SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast as described in the technical specifications and requirements or as required all complete as per scope of works.
197	Installation of Field Instrument & Cabling System for Raw Water Intake PS as per technical specifications and requirements all complete as per scope of works.
198	Installation, Testing and commissioning of Pressure Transmitter (Smart Electronic 2-Wire type 4-20 mA DC Output load with local LCD Display and HART Supported, Accuracy +1% of span or better reaptibilty of ±1% of span.
199	Installation, Testing and commissioning of Radder Level Tranmitter (Range 20m)
200	Installation, Testing and commissioning of Pressure gauge ( Bourdon/Bellow/Diaphram Operation, minimum 150 mm dial size, MOC- AISI 360SS, Movement AISI 316SS, Case material SS 314,IP -65, accuracy ±1%, 0-16 Kg/cm²)
201	Installation, Testing and commissioning of Instrumentation Cabling system including all GI perforated cable trays, prefabricated GI bends and Tees for cable trays with all nut and bolts, etc. as per employers requirements.
202	Raw water Transmission Main -
203	Surface dressing, Jungle clearance, dismantling of existing structures, road cutting along the alignment of the proposed raw water main, Lowering, Laying and Jointing of DI/MS Pipes, pipe specials including pipeline appurtenances (Sluice Valves, Butterfly Valve, Air valve, Dismantling Joints etc) of required classes etc by open cut method (Including carriage from Stack Yard, cutting trenches, lowering, aligning in the excavated trenches including leveling, dressing and ramming the bottom, preparation of pipe bedding, bailing or pumping out water) and laying, jointing over ground with necessary pipe supporting structures, thrust blocks, holding down blocks, valve chamber etc. as required complete, including earthwork, backfilling, disposal, road restoration (as appliacble) with due consolidation to its original level and removal of spoils, complete as per scope.
204	Construction of Pipe supporting structures along the alignment of the pipe main including erection and hoisting and laying of pipes and specials as per technical specification and requirements and specifications, complete as per scope.
205	Restoration of road /pathways along the alignment of the raw water main to its original condition inclusive of supplying, laying and finishing with all materials, equipment & labour all complete as per scope.
206	Washing, Cleaning and disinfecting and Hydraulic testing of all pipes and specials laid and jointed in site in section by filling water including supplying, installing & fixing all equipments (Rate including supply of water) as per tender requirements and specification as per scope of work all complete.
207	Any other item and sub items not specified in the above but required to complete the works.
208	Water Treatment Plant Civil Work -
209	Construction of Stilling Chamber (s), Inlet Channel and Parshall Flume(s)
210	Construction of Flash Mixer (s) and Distribution Chamber (s)
211	Construction of Clariflocculator(s)
212	Construction of Rapid Gravity Filter beds
213	Construction of Elevated Service cum Backwash reservoir for backwashing of Filter and other utilities.
214	Construction of Clear Water Reservoir cum Pump house.
215	Construction of Sludge / backwash waste-water collection sump cum pump house.
216	Construction of Sludge Lagoon(s)
217	Construction of Chemical House
218	Construction of Chlorination Building
219	Construction of Administrative Building including Plumbing and Sanitation arrangement all complete.
220	Construction of Filter Annex Building including Plumbing and Sanitation arrangement all complete.
221	Construction of Staff Quarters.
222	Land development and landscaping of WTP site, Boundary Wall, Gate, Guard Room, drainage and access road, internal pathways etc all complete including Final Clean-up of all premises of the WTP area.
223	Construction of substation building as per technical specification and requirments.
224	Any other item and sub items not specified in the above but required to complete the works.
225	Mechanical work (Installation of equipment including, but not limited to secure storage, protection, erection, installation and initial testing. Items not listed and required for completing the job shall be supplied by contractor as a part of the installation without any additional payment.)
226	Stilling Chamber and Parshall Flume: Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, valve operating platforms etc, Bypass pipe with valves, fittings and specials, Motorised drop gate/sluice gates, with provision for auto/manual operation, at the exit of Parshall flume.
227	Flash Mixer: Agitator/Flash Mixers complete with motor assembly, reduction gear, base frame etc, Motorised inlet and outlet valves with provision for auto/manual operation (with valve operating platform) and dismantling joints and piping, Draining pipe with motorised valves with provision for auto/manual control, connecting pipes, specials, fittings for draining to sludge collection sump, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders, operating platforms etc.
228	Clariflocculator
229	Clarifier Bridge Assembly alongwith flocculators including support, clips, etc, Metal works including handrails, step irons, steel ladders, operating platforms etc..
230	Telescopic sludge bleeding arrangement, Bottom Sludge scraping arrangement complete with motor assembly, reduction gear, scraper blades etc, Sludge extraction piping with motorised isolation valves, fittings and specials, dismantling joints, including extraction header pipes.
231	Clarified Water collector arrangement including weir plates.
232	Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks.
233	Rapid Sand Filters, Pipe gallery and Filter Annex Building.
234	Filter Sand and Supporting gravel pack, Under drain systems with filter nozzles, Wash water drain troughs, Motoried inlet gates or valves with provision for auto/manual control, Motorised Filtered water outlet valves with provision for auto/manual control, Motorised wash water drain gates or valves with provision for auto/manual control, Motorised Air Scour valves with provision for auto/manual control, Filtered water Flow meters (ROF and LOF) with provision for relay of the data, All necessary valves for filter drain and Air release with motorised control and provision for auto/manual control, Piping including fittings, dismantling joints and specials, Backwash water flow measuring and control system including flow control valve and associate piping, Sump drain pumps with piping, Utility water pipes, valves, hose valves with rubber hose for wash down and cleaning of tanks, Metal works including handrails, step irons, steel ladders etc.
235	Air Blower of required capacity along with silencer, motor, suction filter, NRV, discharge isolation valve, V-belt and pulley, acoustic hood, pressure gauge, pressure switch and common base frame etc.
236	Miscellaneous equipment including ventilation system, fire extinguishers etc.
237	EOT monorail hoist with accessories for handling of blower system.
238	Chemical House: Mixer of Alum mixing/storage tank with Alum dilution trays, Chemical transfer/dosing pumps for Alum solution with suction/delivery pipes, valve,ﬁttings and specials , Alum dosage chambers with pipes, motorised valves, ﬁttings and specials, Alum dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage point with a diﬁuser, Polymer solution preparation and dosage pump with suction and delivery pipes, motorised valves, fittings and specials, Polymer dosage pipes, motorised valves, ﬁttings and specials from the chemical house to dosage points with diffusers, All other pipes, motorised valves, ﬁttings and specials for utility water supply, overﬂow and drain in the chemical house, Sump drain pumps with piping, Metal works including handrails, step irons, steel ladders, hatches, Ventilation, ﬁre extinguishers, dust collectors, exhaust fans of lime powder feeding, Weighing Machine of 1000 kg capacity etc. as per technical specification and requirements all complete.
239	Chlorine Building -
240	Weigh-scale suitable for chlorine cylinders, Vacuum type Chlorinator for pre-chlorination, Vacuum type chlorinator for post-Chlorination, Chlorine ejector for pre and post chlorination, Utility water boosting pumps and motors with pipes, valves, fittings and specials, Chlorine gas and solution pipes, valves, fittings and specials from the chlorine building upto dosage points (pre and post chlorination), Safety Equipment as per technical specification and requirements all complete.
241	Chlorine cylinders / tonners as required as per technical specification and requirements all complete.
242	Filter Backwash arrangement: Horizontal Centrifugal pumps including motors and piping for pumping to Overhead reservoir, Horizontal pumps including motors and piping for surface wash of filter beds and clariflocculator and motorized inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. as per technical specification and requirements all complete.
243	Sludge sump cum Pump House: Motorised inlet gate or valve with provision of auto/manual handling, dismantling joints, specials and piping, Metal works including handrails, step irons, steel ladders etc. , Horizontal centrifugal pump and motor with motorised valves, dismantling joints, pipings,fittings etc for conveyance of sludge to Sludge Lagoon, as per technical specification and requirements all complete.
244	Plant piping: Interconnection pipe between inlet chamber, ﬂash mixing tanks including pipes, ﬁttings, dismantling joints, and specials, Interconnection between ﬂash mixing tanks and Clariflocculator including pipes, ﬁttings, dismantling joints and specials, Interconnection between Clariflocculator and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Interconnection between rapid sand filters and clear water reservoir including pipes, ﬁttings, dismantling joints and specials, Sludge drain pipe between the treatment units upto Sludge holding tanks including pipes, specials, dismantling joints, Interconnecting pipes between Sludge Sump, sludge Lagoon as per technical specification and requirments all complete.
245	Clear Water Reservoir cum Pumping Station -
246	Horizontal Centrifugal pumps including motors as specified in the technical specification all complete.
247	Pipes, fittings and specials, Valves on pump discharge pipe including check valves, butterfly valves, sluice valves, air release valve and other ancillary valves with necessary provision for auto/manual control of with necessary protection against thrust force, Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers, Dewatering pump with piping, Surge Protection System including ventilation arrangement, etc.
248	EOT Crane with accessories.
249	Miscellaneous equipment including ventilation system, fire extinguishers etc.
250	Miscellanous Equipments and Furniture.
251	Water quality analyzer rack, Laboratory equipment /apparatus including Laboratory reagent, Laboratory glassware's and reagents.
252	Sampling table complete with pumps, pipelines, valves etc, Sampling pumps with piping from sampling points to laboratory.
253	Air conditioning, ventilation system along with rain protection cowl and bird screen, fire extinguishers etc.
254	Furniture for Administrative Building, Chemical House (Laboratory furniture), Chlorination Building, Filter Annex Building, Staff Quarter, Guard Room.
255	Any other item and sub items not specified in the above but required to complete the works
256	Electrical work. -
257	Power substation- 33KV Indoor switchboard.
258	33KV/0.433 KV transformers with OLTC and Automatic Voltage Regulator.
259	415V indoor switch board/MCC/PDB, Soft starters, Capacitors, LPBS, bus-duct, Electrical control panel set for filter bed system, Electrical control panel set for filter bed system, 110 V Ni-Cd batteries including battery chargers and Distribution panels.
260	Complete lighting system in all the civil structures and buildings (including street poles on approach road, interplant roads and pathways and adequate number of high mast lighting arrangement with lightning arrestors) including fixtures, poles, wires, conduits, cables, wiring and necessary accessories including Emergency lighting systems with lighting fixtures and cables, Miscellaneous panels including lighting panels.
261	Complete cabling system with HT, LT, instrumentation and control cables, cable trays and accessories.
262	Earthing for all equipments including earthing pits as necessary, including Lightning protection system for all civil structures and buildings.
263	415V 200KVA DG set with AMF panel & accessories
264	Any other item and sub items not specified in the above but required to complete the works.
265	Instrumentation and Automation Work -
266	SCADA control system for remote monitoring and control in the central SCADA room including work station for SCADA server, data server, web server complete with server rack panel, PC with monitor for operator stations, laptop, LED display, , printer, necessary software and hardware, internet leased line for for SCADA webcast.
267	UPS for SCADA and monitring, Surveillance and Telephone system etc with UPS panel.
268	Main CPU Controller Panel with Remote I/O PLC panel, RTU for RWPS, CWPS, substation, different WTP units, desktop PC for local HMI, at specified locations including PLC/ICP with software and hardware with complete ancillary equipment.
269	Instruments like flow meter with transmitter and smart remote display,level sensor with local display and trasmitter, Water quality measurement equipment including analyzer, sensor, local display, necessary weather protection enclosure, transmitter complete with all cables and accessories, Pressure transmitter, Instrumentation and control cables including cable trays, racks, ducts, OFC, LAN cable, conduit cable laying pipe, multiport switch, etc.
270	IP EPABX Telephone system, IP PA Emergency Announcement system, CCTV monitoring system for WTP and all other remote areas.
271	Fiber Optic L2 Switch communication system betweenremote locations and WTP through Armoured Single Mode OFC with HDPE pipe conduit complete with enclosure, and all accessories.
272	Any other item and sub items not specified in the above but required to complete the works.
273	Clear water transmission main -
274	Surface dressing, Jungle clearance, dismantling of existing structures, road cutting along the alignment of the proposed clear water main, Lowering, Laying and Jointing of DI/MS Pipes, pipe specials including pipeline appurtenances (Sluice Valves, Butterfly Valve, Air valve, Dismantling Joints etc) of required classes etc by open cut method (Including carriage from Stack Yard, cutting trenches, lowering, aligning in the excavated trenches including leveling, dressing and ramming the bottom, preparation of pipe bedding, bailing or pumping out water) and laying, jointing over ground with necessary pipe supporting structures, thrust blocks, holding down blocks, valve chamber etc. as required complete, including earthwork, backfilling, disposal, road restoration (as appliacble) with due consolidation to its original level and removal of spoils, complete as per scope.
275	Construction of Pipe supporting structures along the alignment of the pipe main including erection and hoisting and laying of pipes and specials as per technical specification and requirements and specifications, complete as per scope.
276	Pipe laying by adopting trenchless technologies (below drainage canal, State Highway or any other important road of heavy vehicular traffic), including the cost of casing pipe of required size, taking of entry and exit pits, all related civil works like excavation, shoring/strutting, etc and ground penetrating radar survey to protect existing utilities at the pipe installtion location and restoration of site after completion, inclusive of construction of driving/ receiving pits, labours, material, tools and tackles, hire charges for driving machineries, clearing of sites etc. complete in all respect inclusive of any cost to be incurred in seeking permission from the concerned department as per tender requirements and specification and scope of work all complete.
277	Restoration of road /pathways along the alignment of the clear water main to its original condition inclusive of supplying, laying and finishing with all materials, equipment & labour all complete as per scope.
278	Washing, Cleaning and disinfecting and Hydraulic testing of all pipes and specials laid and jointed in site in section by filling water including supplying, installing & fixing all equipments (Rate including supply of water) as per tender requirements and specification as per scope of work all complete.
279	Any other item and sub items not specified in the above but required to complete the works.
280	Intermediate Ground Level Storage Reservoir -
281	Construction of reservoir with chlorine contact tank and sump with proper foundation, excavation, backfilling,disposal of spoils as per technical requirements and speciifcation as per scope of work all complete including Provision of Electromagnetic flow-meter and residual chlorine measurement at the Inlet pipe and level sensor in the reservoir including data transmission to remote location.
282	Construction of boundary wall, gate and access road as per technical speciifcation and requirements all complete as per scope of work.
283	Any other item and sub items not specified in the above but required to complete the works.
284	All piping and appurtenances,Motorised Sluice gates with provision for auto/manual operation, Inlet and outlet gates/valves of reservoirs, Sump drain pumps with piping, Inlet pipes, drain pipes, overflow pipes of reservoir with fittings and special upto outer wall of reservoirs/ valve chambers including ventilation arrangement all complete as required as per technical specificaiton and requirments.
285	Provisional Sum (For Health, safety, Environment and social requirement, Electricity connection (Service charges and Security Charges), STI, STD and HIV / AIDS alleviation program , Tree cutting, shifting and / or repairing of utilities and supporting utilities, dismantling and restoration of entry, engagement of traffic volunteers, payment of fees of various statutory authorities, transplantation of trees or planting new saplings with guard and other miscellaneous works, CTE, CTO, development of green belt across WTP etc) as outlined in the bid document including Employers share of the Dispute Adjudication Boarda.
286	5.1 - Fixed Fee in Local Currency INR (contractor' annual Fixed Fee)
287	5.2 - Annual production at WTP (contractor's veriable fee )
288	5.3 - Contractors Guranteed electricity Consumption
289	Note : The amount under 5.3 shall be used for evaluation purpose only and as per applicability of Clause 14 & 15 of Preamble to BOQ -
290	Other services during opeartion service period
291	Provisional Sum for Operation & Maintenance
292	Gross Total Amount(Summary of Price Schedule 1 to 6) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Water Purification Tenders

Water Treatment Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Balance Works Of The Package Of ‘Design, Build Of Raw Water Intake Well, Water Treatment Plant, Reservoir, Transmission Main For Indpur And Taldangra Block In Bankura Including Operation & Maintenance For 2 Years Under Package Bkp 01 (Sche, Bankura-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Balance Works Of The Package Of ‘Design, Build Of Raw Water Intake Well, Water Treatment Plant, Reservoir, Transmission Main For Indpur And Taldangra Block In Bankura Including Operation & Maintenance For 2 Years Under Package Bkp 01 (Sche, Bankura-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us