|
| 1 | WOODEN CHAIRSM&L for removal of existing broken/unserviceable front leg of chair dining (FD-279, 228 & 203), replacing the same with new front leg, made out of 460 x 55 x 30mm 1st class hard wood (Teak) made to shape for chair dining and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and directed. |
| 2 | M&L for removal of existing broken/unserviceable rear leg of chair dining ( FD-279, 228 & 203), replacing the same with a new rear leg, made out of 890 x 55 x 30mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg, complete all as specified and directed. |
| 3 | M&L for removal of existing broken top back rest of chair dining (FD-279, 228 & 203) and replacing the same with a new back rest made out of 405 x 45 x 35mm tapering to 405 x 45 x 15mm 1st class hard wood (Teak) made to shape by slightly concaving and all exposed surfaces duly french polished and fitted all as shown in drg complete all as specified and directed. Note : Each back rest shall be measured as seperate unit |
| 4 | M&L for removal of the existing broken front rail of the seat of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 440 x 30 x 65 mm in 1st class hard wood (Teak) made to shape, provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed. |
| 5 | M&L for removal of existing broken back rail of the seat of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 405 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed. |
| 6 | M&L for removal of existing broken, side rail of the seat frame of chair dining (FD-279, 228 & 203) and replacing the same with a new one made out of 430 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted as shown in drg complete all as specified and directed. |
| 7 | M&L for removal of existing/broken bottom stiffener complete of chair dining (FD-279, 228 & 203) and replacing the same with new stiffeners made out of 25 x 20 mm 1st class hard wood (Teak) having a length of 430 mm and all exposed surfaces duly french polished and fitted as shown on drg complete all as specified and directed. |
| 8 | All as per item No. 1 here-in-above but replacing front leg of chair writing (FD-280 & FD-250) with new leg made out of 685x55x30mm complete all as specified and directed. |
| 9 | All as per Item No. 2 here-in-above but replacing the rear leg of chair writing (FD-280 & FD-250) with new leg made out of 890 x 30 x 55mm. |
| 10 | All as per Item No. 3 here-in-above but replacing the back rest of chair writing (FD-280 & FD-250) with new back rest made to shape to 50 x 15mm out of 50 x 35mm complete all as specified and directed. |
| 11 | M&L for removal of existing broken/unserviceable any one arm rest of chair writing (FD-280 & FD-250) and replacing the same with a new arm rest made to shape out of 25mm thick, top width 60mm, tapering to the bottom having a width of 55mm, length 470 mm 1st class hard wood (Teak) including french polishing all exposed surfaces and fitted all as shown on drawing complete all as specified and directed. |
| 12 | All as per Item No. 7 here-in-above but bottom stiffner complete of chair writing (FD-280 & FD-250) having a length of 470mm complete all as specified and directed. |
| 13 | M&L for removal of existing broken front/back/side rail of seat frame of chair writing (FD-280 & FD-250) and replacing the same with new one made out of 440 x 30 x 65 mm 1st class hard wood (Teak) made to shape provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown in drgcomplete all as specified and directed.Note : Each rail shall be measured as seperate unit. |
| 14 | All as per Item No.01 here-in-above but replacing front leg having a length of 435mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed.. |
| 15 | All as per Item No.2 here-in-above but replacing rear leg having a length of 815 mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 16 | All as per Item No.3 here-in-above but replacing back rest made to shape out of 405 x 50 x 35 mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 17 | All as per Item No.4 here-in-above but replacing front rail made to shape out of 440 x 30 x 65 mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 18 | All as per Sl Item No.5 here-in-above but replacing rear rail made to shape out of 400 x 30 x 65 mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 19 | All as per Sl Item No.6 here-in-above but replacing side rail made to shape out of 435 x 30 x 65 mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 20 | All as per Sl Item No. 7 here-in-above but the length of stiffeners 430mm for chair wooden bottom without arms (FD-285 & FD-225) complete all as specified and directed. |
| 21 | M&L for removal of existing broken / unserviceable plywood seat of chair wooden bottom without arms (FD-285 & FD-225) and replacing the same with new OST plywood (Make-Kit ply/Century/Indian Plywood (Anchor) seat 6mm thick fixed to the side frames of the seat with steel screws @ 75mm C/C shown on drg complete all as specified and directed. |
| 22 | All as per Sl Item No.1 here-in-above but replacing front leg of chair easy (FD-229 & FD-201) made to shape out of 545 x 55 x 25 mm all as shown on drg complete all as specified and directed. |
| 23 | All as per Sl Item No. 2 here-in-above but replacing rear leg of chair easy (FD-229 & FD-201) made to shape out of 490 x 55 x 25 mm all as shown on drg complete all as specified and directed. |
| 24 | All as per Sl Item No. 11 here-in-above but replacing arm rest of chair easy (FD-229 & FD-201) made to shape out of 610 x 65 x 25 mm all as shown on drg complete all as specified and directed. |
| 25 | All as per Sl Item No 4 here-in-above but replacing front rail of chair easy (FD-229 & FD-201) seat frame made to shape out of 510 x 55 x 25 mm all as shown on drg complete all as specified and directed. |
| 26 | All as per Sl Item No. 5 here-in-above but replacing rear rail of seat frame of chair easy (FD-229 & FD-201) made to shape out of 480 x 70 x 40 mm all as shown in drg complete all as specified and directed. |
| 27 | All as per Sl Item No. 6 here-in-above but replacing side rail of seat frame of chair easy (FD-229 & FD-201)made to shape out of 575 x 70 x 40 mm all as shown on drg complete all as specified and directed. |
| 28 | M&L for removal of existing top / bottom rail of back rest frame of chair easy (FD-229 & FD-201) replacing the same with new one made to shape out of 480 x 55 x 40mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown on drg complete all as specified and directed. Note : Each rail shall be measured as sperate unit. |
| 29 | M&L for removal of broken unserviceable side rail of back frame of chair easy (FD-229 & FD-201) replacing with new one made to shape out of 440 x 70 x 25 mm 1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and fitted all as shown on drg complete all as specified and directed. |
| 30 | M&L for removal of the existing broken Stiffener rail of chair easy (FD-229 & FD-201) and replacing with new one, made to shape out of 510 x 50 x 25 mm 1st class hard wood (Teak) and all exposed surfaces duly french polished and fitted all as shown on drg complete all as specified and directed. |
| 31 | All as per Sl Item No.1 here-in-above but replacing front leg of chair easy cushioned (FD-358) made to shape out of 545 x 55 x 25 mm all as shown on drg complete all as specified and directed. |
| 32 | All as per Sl Item No. 2 here-in-above but replacing rear leg of chair easy cushioned (FD-358) made to shape out of 490 x 55 x 25 mm all as shown on drg complete all as specified and directed. |
| 33 | All as per Sl Item No. 11 here-in-above but replacing arm rest of chair easy cushioned (FD-358) made to shape out of 610 x 65 x 25 mm all as shown on drg complete all as specified and directed. |
| 34 | M&L for removal of existing damaged cushion from the back of chair easy cushioned (FD-358) and replacing with new back cushion 50mm thick (Make as approved) fixed over existing frame with 3mm thick commercial plywood duly covered incl the frame/ cushion up to back with best quality leatherised Rexene of approved colour and fixed to the back of the chair easy with screws all as shown in drg complete all as specified and directed. |
| 35 | All as per Sl Item No. 34 here-in-above but replacing the seat cushion of chair easy cushioned (FD-358) with new cushion (Make as approved), 75mm thick, all as shown in drg complete all as specified and directed. |
| 36 | M&L for removal of existing damaged cushions fixed on any one of the arm rests of chair easy cushioned (FD-358), replacing the same with new cushion (Make as approved) of 25 mm thick fixed on existing arm rest made to shape duly covered with leatherised Rexene and cushion base fixed to top of arm rest with screws all as shown in drg complete all as specified and directed. |
| 37 | M&L for removal of existing broken/unserviceable front leg of chair dining cushioned long back (FD-357) & replacing the same with new front leg, made out of 450 x 50 x 25mm 1st class hard wood (Teak) made to shape for chair dining long back and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg complete all as specified and directed. |
| 38 | M&L for removal of existing broken/unserviceable rear leg of chair dining long back (FD-357) & replacing the same with a new rear leg, made out of 1200 x 50 x 25mm 1st class hard wood (Teak) made to shape with the existing leg and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg complete all as specified and directed. |
| 39 | M&L for removal of damaged cushioned back of chair dining with long back (FD-357) complete and replace with new cushioned back frame mounted on 10mm thick commercial plywood, base over 50mm thick 24 density synthetic foam rubber made to shape as shown in drg duly covered with leatherised Rexene and fixing the cushioned base to the back frame of the chair with screws all as shown on drg complete all as specified and directed. |
| 40 | M&L for removal of existing damaged cushioned seat frame of chair dining with long back (FD-357) complete and replace with new cushioned seat frame mounted on 10mm thick commercial plywood base, over which 50mm thick 24 density synthetic foam rubber duly covered with superior quality leatherised rexine and fixing the cushioned seat to the seat base/frame with screws all as shown in drg complete all as specified and directed. |
| 41 | M&L for removal of existing damaged back cover of chair dining with long back (FD-357) complete and replace with new 10mm thick commercial plywood, base covered with superior quality leatherised rexine of existing color and texture and fixing the back cover to the back base/frame with screws all as shown in drg complete all as specified and directed. |
| 42 | M&L for removal of existing broken/unserviceable wooden writing hand rest of chair pedastal writing (DB-4124) and replacing with new first class teak wood hand rest made to shape as shown on drg having middle length 750mm, 25mm thick the slightly curved base portion having 55mm width at the base increasing in width to 80 mm in the middle the expanded writing portion having a width 290mm and length 365 mm front portion being oval, all exposed surfaces duly french polished and fixed in position all as shown on drg complete all as specified and directed. |
| 43 | M&L for removal of existing broken right front leg alongwith its top most support for the writing hand rest of chair pedestal writing (DB-4124) and replacing with new one made to shape out of 685 x 55 x 55mm 1st class hard wood (Teak) and the top support should be 90mm long on the outside of the leg and 120mm in the inner portion 25mm thick, all exposed surfaces duly french polished and fixed to the top portion of the leg all as shown on drg and as specified. |
| 44 | M&L for removal of existing broken left front leg of chair pedestal writing (DB-4124) and replacing the same with new one made to shape out of 430 x 55 x 55mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg and as specified. |
| 45 | M&L for removal of existing any one of hind leg of chair pedestal writing (DB-4124) and replacing with new single hind leg made to shape out of 860 x 100 x 35mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg complete all as specified and directed. |
| 46 | M&L for removal of existing broken top back support of chair pedestal writing and replacing with new one made to shape out of 555 x 125 x 70 mm 1st class hard wood (Teak), all exposed surfaces duly french polished and fixed all as shown on drg complete all as specified and directed. |
| 47 | M&L for removal of existing broken middle back supporting stiffner of chair pedestal writing (DB-4124) and replacing with new one made to shape out of 365 x 60 x 40 mm 1st class hard wood (Teak), all exposed surfaces french polished and fixed all as shown on drg complete all as specified and directed. |
| 48 | HAT STANDM&L for removal of existing damaged teak wood edging on all sides of Hat Stand (FD-233) & replacing the same with new 1st class hard wood (Teak) edging 6 mm thick 35 mm wide 1000 mm long and 710mm high on both sides, all exposed surfaces french polished and fixed with nails all as shown in drg complete all as specified and directed. |
| 49 | M&L for removal of existing broken/foggy mirror of Hat Stand (FD-233) and replacing the same with new mirror not less than 5.0 mm thick and of size 300 x 400 mm and fixed all as shown in drg complete all as specified and directed. |
| 50 | M&L for removing existing damaged plywood of Hat Stand (FD-233) and replacing the same on the front face with new 4mm thick one side teak veneered (OST)plywoodexcept on the mirror portion and refixing the existing/ retrieved peg hooks and french polishing the teak veneered surfaces complete all as shown in drg complete all as specified and directed. |
| 51 | M&L for fixing Hat stand (FD-233) on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug complete all as specified and directed. |
| 52 | M&L for removal of existing damaged peg hooks of Hat Stand (FD-233) and replacing each peg with new anodised aluminium peg hooks of 120mm long, 40mm base, fixed to the 4mm thick plywood face with a pair of screws all as shown in drg complete all as specified and directed. |
| 53 | PEG TABLEM&L for removal of existing damaged top of peg table (FD-236) and replacing the same with new top 18mm thick prelaminated particle board 450 x 300 mm size with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides incl french polishing teak wood edging and as shown in drg complete all as specified and directed. |
| 54 | M&L for removal of existing damaged any one leg of peg table (FD-236) and replacing the same with new leg 362 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg complete all as specified and directed. |
| 55 | M&L for removal of existing broken long rail of peg table (FD-236) and replacing the same with new rail 400 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg complete all as specified and directed. |
| 56 | M&L for removal of existing broken short rail of peg table (FD-236) and replacing the same with new rail 250 mm long x 30 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown in drg complete all as specified and directed. |
| 57 | SIDE BOARDM&L for removal of existing damaged any one of the side or middle shutters of side board (FD-241) and replacing the same with new single shutter made of 18 mm thick prelaminated particle board with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including refixing of retrieved builders hardware such as knobs, ball spring catches etc and french polishing the teak wood edging complete all as specified and directed. |
| 58 | M&L for removal of existing damaged top of the side board (FD-241), replacing the same with new 18mm thick pre laminated particle board 450 x 1500 mm size with one side decorative teak finish and fixed complete all as shown in drg complete all as specified and directed. |
| 59 | M&L for removal of existing damaged teak wood back of side board (FD-241) and replacing the same with new back made of 12mm thick commercial plywood 635 x 1500 mm and fixed complete all as shown in drg complete all as specified and directed. |
| 60 | M&L for supply Stainless steel knobs for side board complete all as specified and directed. |
| 61 | TABLE DINING M&L for removal of existing damaged top of table dining 8 persons (FD-273) complete and replacing the same with new top made of 18mm thick prelaminated particle board of teak facing one side of size 900 mm x 1800 mm with 4mm thick teak wood beading alround, french polishing on teak wood edging and fixed all as shown in drg complete all as specified and directed. |
| 62 | M&L for removal of existing damaged legs of table dining 8 persons (FD-273) and replacing with new leg made to shape out of 722x 75 x 40mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed all as shown in drg complete all as specified and directed. |
| 63 | M&L for removal of existing damaged long rail of table dining 8 persons (FD-273) and replacing with new long rail made to shape out of 1740x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed all as shown in drg complete all as specified and directed. |
| 64 | M&L for removal of existing damaged short rail of table dining 8 persons (FD-273) and replacing with new short rail made to shape out of 840 x 25 x 100 mm1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces all as shown in drg complete all as specified and directed. |
| 65 | TABLE DINING 6 PERSONS (1500x900x760 mm)M&L for removal of existing damaged top of table dining 6 persons (FD-273) complete and replacing the same with new top made of 18mm thick prelaminated particle board of teak facing one side of size 900 mm x 1500 mm with 4mm thick teak wood beading on all four sides, french polishing on teak wood edging and fixed all as shown in drg complete all as specified and directed. |
| 66 | M&L for removal of existing damaged legs of table dining 6 persons (FD-273) and replacing with new leg made to shape out of 722 x 75 x 40mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixedall as shown in drg complete all as specified and directed. |
| 67 | M&L for removal of existing damaged long rail of table dining 6 persons (FD-273) and replacing with new long rail made to shape out of 1440x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed all as shown in drg complete all as specified and directed. |
| 68 | M&L for removal of existing damaged short rail of table dining 6 persons (FD-273) and replacing with new short rail made to shape out of 840x 25 x 100mm 1st class hard wood (Teak), provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed all as shown in drg complete all as specified and directed. |
| 69 | TABLE DINING (1200 X 900X760 mm)All as per Sl item No. 65 here-in-above but new top for table dining (FD-273) having size 1200 x 900 mm complete all as specified and directed. |
| 70 | All as per Sl item No. 66 here-in-above but new leg for table dining (FD-273) made out of 722 x 75 x 40 mm complete all as specified and directed. |
| 71 | All as per Sl item No. 67 here-in-above but new side rail for table dining (FD-273) having size 25x100x1140 mm complete all as specified and directed. |
| 72 | TABLE WITHOUT DRAWER (900 X 600 X760 mm)All as per Sl item No. 65 here-in-above but new top for table without drawer (FD-284) having size 900 x 600mm complete all as specified and directed. |
| 73 | All as per Sl item No. 66 here-in-above but new leg for table without drawer (FD-284), made to shape out of 741 x 60 x 30 mm complete all as specified and directed. |
| 74 | Removal of existing broken any one long rail of table without drawer (FD-284) and replacing the same with new rail made to shape out of 20 x 60 x 840 mm 1st class hard wood (Teak), french polishing all exposed surfaces and fixed all as shown on drg complete all as specified and directed. |
| 75 | All as per Sl item No. 74 here-in-above but new short rail of size 20x60x540 mm for table 900 x 600 x760 mm without drawer (FD-284) complete all as specified and directed. |
| 76 | TABLE CENTREAll as per Sl item No. 65 here-in-above but new top of size 900 x 450 mm for table centre (FD-274) complete all as specified and directed. |
| 77 | All as per Sl item No. 66 here-in-above but new leg made to shape out of 400 x 60 x 30 mm for table centre (FD-274) complete all as specified and directed. |
| 78 | All as per Sl item No. 67 here-in-above but new long rail of size 20x50x840 mm for table centre (FD-274) complete all as specified and directed. |
| 79 | All as per Sl item No. 68 here-in-above but new short rail of size 20x50x440 mm for table centre (FD-274) complete all as specified and directed. |
| 80 | TABLE BED SIDEAll as per Sl item No. 65 here-in-above but new table top of size 450 x 230 mm for table bed side (FD-276) complete all as specified and directed. |
| 81 | M&L for removal of existing damaged any one of the two sides of table bed side (FD-276) and replacing the same with new side using 18mm prelaminated particle board of size 230 x 510 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg complete all as specified and directed. |
| 82 | M&L for removal of existing damaged back ply of table bed side (FD-276) and replacing the same with new 6 mm thick commercial ply of size 450 x 510 mm including french polishing on wooden parts and fixed all as shown on drg complete all as specified and directed. |
| 83 | TABLE WRITINGAll as per Sl item No.65 here-in-above but new table top of size 1145 x 600 mm for table writing (FD-275) complete all as specified and directed. |
| 84 | All as per Sl item No. 66 here-in-above, but new leg made to shape of size 717 x 55 x 35 mm for table writing (FD-275) complete all as specified and directed. |
| 85 | All as per Sl item No. 67 here-in-above but new long rail of size 25x50x1085 mm for table centre (FD-275) complete all as specified and directed. |
| 86 | All as per Sl item No. 68 here-in-above but new short rail of size 50x25x540 mm for table centre (FD-275) complete all as specified and directed. |
| 87 | M&L for removal of existing damaged shutter of the table shelf of table writing (FD-275) and replacing with new shutter 18mm thick one side teak veneered particle board with 4mm thick teak wood beading on all 4 sides fixed to the side with Piano hinges of MS and the shutter provided with a recessed handle 50 x 38 mm and also cupboard lock with duplicate keys including french polishing teak veneered surface and TW beading and fixed complete all as shown in drg complete all as specified and directed. |
| 88 | M&L for removal of existing damaged drawer of table writing complete (FD-275) and replacing with new drawer with 18 mm prelaminated particle board and back plank base shall be 6mm thick commercial plywood and the drawer to be provided with a new recessed type handle 50 x 38 mm embedded in the drawer face, exposed portion duly french polished all as shown in drg complete all as specified and directed. |
| 89 | TEAPOYAll as per Sl item No. 65 here-in-above, but new top of size 600 x 450 mm for Teapoy (FD-278) complete all as specified and directed. |
| 90 | All as per Sl item No. 66 here-in-above, but new leg made out of 30 x 60 x 497 mm for teapoy (FD-278) complete all as specified and directed. |
| 91 | M&L for removal of existing broken long rail of Teapoy (FD-278) and replacing with new long rail made to shape out of 510x 20 x 50 mm 1st class hard wood (Teak) including provn of a hard rubber ring screwed at the bottom of the new leg and french polishing all exposed surfaces and fixed complete all as shown in drg (FD-278) complete all as specified and directed. |
| 92 | All as per Sl Item No.68 here-in-above but replacing short rail of teapoy made to shape out of 420 x 20 x 50 mm all as shown on drg (FD-278) complete all as specified and directed. |
| 93 | TABLE 3' X 2' WITH DRAWERAll as per Sl item No.65 here-in-above, but new top of size 900x600 mm for table with drawer (FD-283) complete all as specified and directed. |
| 94 | All as per Sl item No.66 here-in-above, but new leg for table with drawer made to shape out of 741 x 60 x 30 mm (FD-283) complete all as specified and directed. |
| 95 | Removal of existing damaged/unserviceable drawer of table (FD-283) with drawer complete and replacing the same with new drawer with front made of 18 mm thick prelaminated particle borad 110 mm high and rear side with 12 mm thick particle board and base 6 mm thick commercial plywood all wooden exposed surface of drawer duly french polished all as shown on drg (FD-283) complete all as specified and directed. |
| 96 | TABLE DRESSING GENTSM&L for removal of existing foggy/broken mirror of table dressing gents (FD-230) and replacing the same with new mirror not less than 5.0 mm thick and of size 380 x 760 mm and fixing on the existing frame all as shown on drg (FD-230) complete all as specified and directed. |
| 97 | M&L for fixing Table dressing Gents (FD-230) on wall at site duly drilling holes with drilling machine and fixing with 45x8 mm MS screw over PVC plug complete all as specified and directed. |
| 98 | TABLE DRESSING LADIESAll as per Sl item No. 96 here-in-above but mirror of size 366 x 1220 mm for table dressing ladies (FD-251/378) complete all as specified and directed. |
| 99 | M&L for removal of existing damaged aluminium double channel alongwith both of the broken sliding glass shutters of table dressing ladies (FD-251/378) and replacing with new aluminium double channels 12 x 22 mm and new sliding glass shutters not less than 5.0 mm thick all as shown on drg (FD-251/378) complete all as specified and directed. |
| 100 | M&L for removal of existing damaged/unserviceable single drawer of the table dressing ladies (FD-251/378) and replacing with a new drawer with front made up of 18 mm thick prelaminated particle board with teak finish on one side with a 22 mm dia brass chromium plated knob fixed to the middle front, 12 mm thick commercial plywood for back & sides and drawer base with 6 mm thick commercial plywood all as shown in drg (FD-251/378) complete all as specified and directed. |
| 101 | M&L for removal of existing damaged ply back of the mirror of table dressing ladies (FD-251/378) and replacing with new 6mm thick 366 x 1220 mm size commercial plywood all as shown in drg (FD-251/378) complete all as specified and directed. |
| 102 | STOOL DRESSINGM&L for removal of existing broken/unserviceable any one leg of stool dressing (FD-252) replacing the same with new leg, made out of 380 x 50 x 30mm 1st class hard wood (Teak) made to shape for stool dressing and all exposed surfaces duly french polished and fitted as shown in drg including provn of a hard rubber ring screwed at the bottom of the new leg all as shown on drg complete all as specified and directed. |
| 103 | M&L for removal of existing broken side rail of stool dressing (FD-252) and replacing the same with new rail 300 mm long x 25 x 50mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown on drg complete all as specified and directed. |
| 104 | M&L for removal of existing broken front/rear rail of stool dressing (FD-252) and replacing the same with new rail 450 mm long x 25 x 65mm first class hard wood (Teak), and all exposed surfaces french polished and fixed all as shown on drg complete all as specified and directed. |
| 105 | M&L for removal of existing cane beading on seat frame of stool dressing (FD-252) & replacing the same with new one made to shape out of 450 x 20 x 20mm1st class hard wood (Teak) provided with 3mm dia holes for caning @ 12.5 mm C/C and all exposed surfaces duly french polished and all as shown on drg complete all as specified and directed. |
| 106 | BOOK CASEM&L for removal of existing damaged teak wood back of book case (FD-237) and replacing the same with new back made of 6 mm thick commercial plywood 635 x 1500 mm and fixed all as shown in drg complete all as specified and directed |
| 107 | M&L for removal of existing damaged any one of the door shutters of book case (FD-237) and replacing the same with new single shutter made of 18 mm thick prelaminated particle board with one side decorative teak finish of size 318 x 600 mm including 18 x 4 mm size teak wood edging all round, shutter fixed with a pair of 75 mm size stainless steel butt hinges including refixing of retrieved builders hardware such as knobs, ball spring catches etc and french polishing the teak wood edging all as shown on drg complete all as specified and directed |
| 108 | M&L for Stainless steel knobs for book case complete all as specified and directed |
| 109 | CHAIR DINING CUSHIONEDS&F 450x65x25mm size Teak wood front/side rail of chair dinning officers and fixed to main frame and legs of chair dinning (Drg No FD/E6/MAP/10), apply two coats of french polich to new front/side rail to match with existing and apply a coat of french polish to other parts of chair including taking out broken/unserviceable front/side rail complete all as specified and directed |
| 110 | S & F 450x50x35mm size Teak wood front leg of chair dinning officers', fixed to main frame of chair dinning (Drg No FD/E6/MAP/10)), apply two coats of french polich to new leg to match with existing and apply a coat of french polish to other parts of chair including taking out broken/unserviceable front leg complete all as specified and directed by Engineer-in-Charge. |
| 111 | S & F 75mm thick, 40 density foam seat, covered with fabric of approved colour suitable for chair dinning officers' (Drg No FD/E6/MAP/10)), fixed to 12mm thick commercial plywood including taking out old unserviceable cushion seat complete all as specified and directed by Engineer-in-Charge. |
| 112 | SOFA SET WITH CUSHIONS&F 560 x 530 x 100mm size foam cushion, seat/back, having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa 4 & 5 seater as per drawing FD-281/373 complete all as specified and directed.Note: Seat and back shall be measured as one unit. |
| 113 | S & F 100mm thick foam cushion seat, having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for sofa single seater with cushion as per drawing No FD-258, including taking out old unserviceable/worn out seat cushion complete all as specified and directed. |
| 114 | S & F 100mm thick foam cushion seat, having 40 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture, suitable for sofa set, three seater with cushions as per drawing No FD-258, including taking out old unserviceable/worn out seat cushion complete all as specified and directed. |
| 115 | S & F 50mm thick foam cushion back, having 32 density, covered all sides with tapestry cloth costing not less than Rs420per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curveed shape, suitable for Sofa chair single seater as per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn out seat cushion complete all as specified and directed. |
| 116 | S & F 50mm thick foam cushion back, having 32 density, covered all sides with tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture including 25mm thick cushion padding to get aesthetical shape and fixing four middle buttons to form middle curve to retain the aesthetical curveed shape, suitable for Sofa chair three seater as per drawing No FD-258, fixed with suitable brass screw including taking out old unserviceable/worn out seat cushion complete all as specified and directed. |
| 117 | M & L providing new tapestry cloth costing not less than Rs 420 per meter of approved colour / shade / texture suitable for 560 x 530 x 100mm size foam cushion seat/back, stiched three sides and provide best quality zip on one side for opening and closing suitable for sofa 4 & 5 seater as per drawing FD-281/373. including taking out old unserviceable/worn out cloth complete all as specified and directed. Please Enable Macros to View BoQ information |
