|
| 1 | Loading, Carriage and unloading of PCC poles from store to work site or vice-versa. |
| 2 | Loading, Carriage, unloading and taking out cable from cable drum of HT 11 KV cable from store to work site or vice-versa. |
| 3 | Loading, Carriage and unloading of MS Item from store to work site or vice-versa. |
| 4 | Erection of Double pole structure of PCC Pole as per standard specifications including fitting of all material. |
| 5 | Grouting of pole with cement brick ballast and coarse sand as per standard specification including cost of all material. |
| 6 | Making of pole plinth of 400 mm dia, 400 mm height with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. |
| 7 | Supply & fixing STONE PAD for PCC Pole as per site requirement as per standard specification |
| 8 | Supply and Fixing of danger board with help of clamp and nut bolts on erected poles |
| 9 | Supply & fixing Barbed wire of at least 10 no. turns with help of top and bottom clamps and nut bolts on ercted PCC poles as per standard specification |
| 10 | Supply of G.I. PIPE 150 MM DIA as per site requirement & standard specification Provided by Contractor |
| 11 | Earthing of supports by sagging of M.S. earthing rod 20mm dia and connecting with earth wire with help of al. lug and nut bolts related works as per standard specifications. |
| 12 | Fabrication/modification of MS Item as per requirement of site |
| 13 | Fixing of MS Channel (100x50x6 )mm 1/ 2.4 / 2.8/3 mtr. Long/M.S. Angle with help of MS clamp and nut bolts as per Required size |
| 14 | Digging of Trench for laying of 11KV cable in Normal soil in size of 30 cm. wide and 1 to 1.5 meter deep. |
| 15 | Digging of Trench for laying of 11KV cable in Kharanja/interlocking Road in size of 30 cm. wide and 1 to 1.5 meter deep. |
| 16 | Digging of Trench for laying of 11KV cable in RCC/Metallic Road in size of 30 cm. wide and 1 to 1.5 meter deep. |
| 17 | L/c for Laying of 11 KV XLPE cables in above digged trench covering with bricks and back filling and proper ramming including cost of bricks and sand as per specifications and also upto pole |
| 18 | L/C for Laying of 11KV XLPE cables for h.d.d method |
| 19 | Laying of 11 KV XLPE cable by HDD method through HDPE Pipe.HDPE Pipe will be provided by contractor. |
| 20 | Laying of 11 KV Cable on single/double pole , Pole to pole in Air. |
| 21 | Laying of 11 KV Cable on Pole to pole in Air.With G.I. Wire |
| 22 | Laying of 11 KV Cable Through GI/MS Pipe. |
| 23 | Making of PIT FOR H.D.D 2X2X1 MTR |
| 24 | Making indoor/outdoor joints of 11 KV XLPE Cable where the cable is being laid. |
| 25 | Connecting of 11kv Indoor cable box to 11 KV VCB Pannel / HT piller Box/ Metering Cubical after erection of work |
| 26 | Mounting and connection of all type of cable box on pole/cable post with the help of MS Clamp as well as cable laying through M.S. /G.I. Pipe the work includes proper clamping of cable box on both end of pipe. 6 inch dia ( 3 mtr. length). |
| 27 | Opening of H.T. Jumpers with 3 Phase 3 Wire H.T. O.H. line before erection of work. |
| 28 | Making of H.T. Jumpers with 3 Phase 3 Wire H.T. O.H. line after erection of work. |
| 29 | Supply & fixing all size aluminium Lug(185 sqmm )as per site requirement as per standard specification |
| 30 | Supply & fixing P.G. CONNECTOR DOG. TO DOG.as per site requirement as per standard specification |
| 31 | Supply & fixing all size M.S. Clamp for Round Pole (2½\\" to7½\\" 50X6 M.M)..as per site requirement as per standard specification |
| 32 | Supply & fixing all size M.S. CLAMP & Bracing calm For PCC POLE..as per site requirement as per standard specification |
| 33 | Supply & fixing all size NUT BOLT WITH WASHER OFF SIZE .as per site requirement as per standard specification |
| 34 | Testing ,commising & Energized Newely 11 kv Network |
| 35 | Carriage of all concering material Kesco Store to site or vice versa Please Enable Macros to View BoQ information |
