|
| 1 | P/Laying of Ferrow cement concrete in 1:2:4 cement appd coarse sand and 20mm stone grite and mixing water proofing compound at the rate of 1 kg./ Bag of cement in thickness of 5cm. Avrage including embedding of expended metal jali of 6 gauge iron wire including and fixing over slab including 6mm thick cement plaster in 1:2 cement and c sand mortor finished with floating coate of need cement PWD SOR New Item 2 |
| 2 | Dismentaling of old Tile work in floor laid in cement mortor DSR Code No 15.23.1 |
| 3 | Laying of PCC 1:4:8 with cement ,sand and 40 mm stone ballast in foundation DSR Code No 4.1.8 |
| 4 | p/laying of vitrified tiles in different sizes with water absorption less than 0.08% .including grouting of joints ,laid with 1:3 cement sand mortar complete DSR No 11.47.2 |
| 5 | Scraping of old exisiting damage White / colour wash and desposal of refuse SOR Chep.17 No 708 |
| 6 | P/ applying plaster of paris putty of avg. thickness 2mm of appd. Brand over the plastered wall surface to prepare to surface even and smooth DSR No 13.26 |
| 7 | finishing wall tex tured exterior paint of required shad : new work ( two or more coat) @3.28ltr /10sqm over and including priming coat of exterior primer applied @2.20kg /10sqm DSR Code No 13.45.1 |
| 8 | Painting with synthetic enamel paint of appd. Brand two or more coats over an under coat DSR Code No 13.62.1 |
| 9 | 12mm thick plaster work in 1:4cement and fine sand mortor DSR Code No 13.1.1 |
| 10 | High speed Internet connection charge |
| 11 | Two set of high frequency modem Wi-Fi speed up to 867 MBPS /5 GHz +300 MBPS /24 GHz , 5 gigabit ports ,4 external eanfennage with access point mode wire less router with LAN Cable connection |
| 12 | Transpotation charge from Mahoba to site |
| 13 | S/F of M.S. squire pipe fram and ply bord top desk and bench combind including cost of welding , proper turning on edge ,painting and top side sunmika finish ,transpotation from work shop to smart class etc as per minimam local market rate . |
| 14 | Bala painting on walls |
| 15 | Earth work in excavation in foundation of column footing DSR Code 2.1.1 |
| 16 | Supply and filling in plinth with Sand under floor , foundation DSR Code No 2.27 |
| 17 | Laying of PCC 1:4:8 with cement ,sand and 40 mm stone ballast in foundation DSR Code No 4.1.8 |
| 18 | M-150 brickwork in 1:6 cement and fine sand mortor in foundation to plinth including cost of material , labour, T&P complete DSR Code No 6.1.2 |
| 19 | Earth work in filling by cartage of earth from 1.00km by tractor trolly. DSR Code No 2.1.1+(1.1.2-19%) |
| 20 | 12mm thick plaster work in 1:4cement and fine sand mortor DSR Code No 13.1.1 |
| 21 | 52mm thick CC floooring with concrete hardiner Toping , under layor 40 mm thick in 1:2:4 cement c sand and 20mm stone grit and top layor 12 mm thick cement hardner consisting of mix (1cement hardner and :2grade stone grit 6 mm ) Comp. DSR Code 11.40 |
| 22 | S/F of M.S. Structure DSR Code No 10.1 |
| 23 | S/F of G.I. coloured profile sheet 0.60 number at the rate of 17.00kg per 3.30x1.00m sheet approved make (Tata ,Nippon ,etc)(as per minium local market rate) |
| 24 | S/F of 15 mm dia P.V.C. pipe line |
| 25 | S/F of low density P.V. C Tank 500 Ltr. |
| 26 | S/F of 25 mm dia brass gate valve |
| 27 | S/F of 25 mm dia pvcpipe line |
| 28 | Misc. Items of pipe line such as socket , tee,union, elbow, niples ,angle cock, gate valve , pvc ball float valve with bross rod and other items |
| 29 | S/F of R.O./ Purifier with all fitting |
| 30 | S/F of 60/80 Liter capacity water coolar standerd make ,such as Volas,Bluestar , Usha equivallent make |
| 31 | S/F of stablizer 1 K.W. capacity |
| 32 | Electrical fitting for water coolar , R.O., |
| 33 | Installation of water coolar , R.O. , |
| 34 | S/F of 1 H.P. monoblock lifting pump |
| 35 | Plumbering charge |
| 36 | Painting work in M.S. strucure |
| 37 | P/F Powder coated Aluminium work for windows for frame and sliding pannel com. In all respect DSR Code No 21.1.1.2 |
| 38 | P/F 5 mm thick Glazing in Aluminium window shutter with EPDM rubber /Neoprene gasket com.in all respect DSR Code No 21.3.2 |
| 39 | S/F of 1 mm thick M.S.sheet door with Frame of 40x40x6 mm comp.shutters DSR Code No 10.5.1 |
| 40 | Smart class room with digital cotent and learning management system (L.M.S.)As per quotation |
| 41 | imformation board + photography |
| 42 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C- DSR 1.10.3 |
| 43 | Submains : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire- DSR1.14.1 |
| 44 | Submains :Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire- DSR1.14.3 |
| 45 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.- DSR1.25 |
| 46 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.- DSR1.31 |
| 47 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.- DSR1.32 |
| 48 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.- DSR2.1-Single pole |
| 49 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.- Marcket Rate. |
| 50 | Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA- DSR-1413 |
| 51 | Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA- Marcket Rate |
| 52 | Supply of 3 KW Solar Power Plant (off grid) with module mounting structure , 48V, 240AH Battery (MNRE Approved) backup , 4.0 KVA Invertor etc …. Complete (5 year warranty) |
| 53 | Installation Charges Please Enable Macros to View BoQ information |
