|
| 1 | Demolition of Concrete (unreinforcement concrete) of any description and in any position not otherwise specifically provided for, and removal of demolished materials out of MD land complete all as specified and as directed by Engr in Charge. |
| 2 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed by Engr in Charge. |
| 3 | M & L for 100 mm thk Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in path/ any paved area complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean, hard strong, dense non-porous and durable pieces of crushed stone gravel, fine aggregates of clean natural sand crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by Texturing cum Curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10 1 14 and Tabl~ 9 of IRC' 15-2017 complete all as specified and directed. |
| 5 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / any paved area including joints as per specification complete all as specified and directed. |
| 6 | M & L or Forming contraction (Dummy) joints 65 mm deep X10 mm wide primed & filled with sealing compound grade \\"A\\". |
| 7 | M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ of concrete slabe 150 mm thick. |
| 8 | M & L for glossy finish chequered tiles of size 300 x 300 x 22-25 mm thick (colour and glazed approved by EIC) with cement and pigments laid over 20 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for Durastone designer parking tiles (square/rectangular ) area of each tile exc 0.09 Sqm but not exc 0.72 Sqm as in floor of shade & designed as approved by EIC,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick screed bed of CM 1:6 complete all as specified and directed. |
| 10 | M&L for Providing, cement concrete type B 0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges and simillar work etc complete all as specified and directed by Engr in Charge. |
| 11 | DIsmantling of Stone slabs and tiles laid, bedded and pointed in any mortar, of any description or thickness in floors, aprons etc complete all as specified and directed by Engr in Charge. |
| 12 | Refixing of old tile rubber moulded 60 mm thk interlocking paver block obtained any shape & size with cement and pigment grade including 50mm thick compacted bed of fine sand complete all as specified and directed by Engr in Charge. |
| 13 | M&L for 60mm thick ruber moulded factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete. |
| 14 | Refixing of old tile rubber moulded 80 mm thk interlocking paver block obtained any shape & size with cement and pigment grade including 50mm thick compacted bed of fine sand complete all as specified and directed by Engr in Charge. |
| 15 | M&L for 80 mm thick ruber moulded factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 16 | M&L for precast factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr in Charge. |
| 17 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching and all other similar works including necessary formwork complete all as directed. |
| 18 | M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual and taking down of plaster complete all as specified and directed. |
| 19 | M&L for preparation of new plaster surface & apply two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer on new plasterd surfaces od wall and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 20 | M&L for complete removal of existing treatment and preparation of surface over two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer exterior on old scraped wall surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 21 | M&L for one coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer exterior on old wall surfaces including preparation of surfaces complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 22 | M & L for preparation of old stone, concrete surfaces of any description (Removal of algae/Fungal patches/Durt etc) and applying one coat of exterior plastic emulsion paint (Weather Coat) on old footpath/colour tiles/ kerb stone etc (colour and pattren as per approved by EIC ) complete all as specified and directed. Please Enable Macros to View BoQ information |
