|
| 1 | Material and labour for painting to articles of steel furniture by adhering to following steps:-a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth. Two coats of hammer tone paint as per existing shade or shade approved by Engr-In-Charge (either Dual tone or single colour) for each item shall be applied externally and internally to each article after applying and drying one coat of metal primer. b) The painting to each article shall only be carried out by spray machine only.c) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement complete all as specified and as shown on drawing and as directed for the following :- |
| 2 | Almirah large steel with shelves DRG.NO. FD-67(M)/351/1031/FD/E6/MAP/18 |
| 3 | Almirah med steel with shelves DRG.NO. FD-67(M), 114,243, 350 & 1032 |
| 4 | Book case steel DRG.NO. FD-45/90 /1028/1047/69 |
| 5 | Bed Hard DRG.NO. FD/E6/MAP/8(R) |
| 6 | Chair Verandah DRG.NO. FD-19/359/FD/MAP-II/07/FD/E6/MAP/11 |
| 7 | Chair school with hand board DRG.NO. FD/E6/MAP/05 |
| 8 | Charpoy Folding DRG.NO. FD-388/388(R) /1119 |
| 9 | Charpoy with Hard top DRG.NO. FD/MAP-II/01 |
| 10 | Locker steel DRG.NO. FD-1029 |
| 11 | Table with drawers steel 900x600mm DRG.NO. FD-1008 |
| 12 | Table office clerk steel DRG.NO. FD-84/84(M)/1004 |
| 13 | Table office officer steel DRG.NO. FD-84/84(M)/1003 /1002 |
| 14 | Table bed side steel DRG.NO. FD-157/157(M) |
| 15 | Stool steel DRG.NO. FD-81/81(M) |
| 16 | Chair steel tubular with arms DRG.NO. FD-75(M) |
| 17 | Chair steel tubular without arms DRG.NO. FD-75(M) |
| 18 | Teapoy Varandah DRG.NO. FD-35/255 |
| 19 | Rack shoe steel DRG.NO. FDE6/MAP/02 & FD/E6/MAP/02(R) |
| 20 | Table steel 900x900x760mm with sunmica top DRG.NO. FD-1009/291 |
| 21 | Rack steel adj steel 6 tier |
| 22 | Cabinet Filing |
| 23 | COMPUTER TABLE,FD/E6/MAP/03 |
| 24 | Removing the existing unserviceable top from table steel carefully;supply and fixing new top of size 900mmx560mm made of 18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as specified and directed. |
| 25 | Removing the existing unservicable /damaged telescopic channel and key board of Table computer and supply and fix new telescopic channel and key board made out of 18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing. |
| 26 | Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing. |
| 27 | Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing. |
| 28 | Remove the existing damaged MS (mild steel) structure and replace it with a new one. The new structure shall be properly painted with black coating prior to installation. Provide and fix bushes as required. All work shall be carried out strictly as per the drawings, specifications, and directions provided. |
| 29 | Removing the existing unserviceable/damaged drawer complete from Table computer and supply and fix new drawer made of 18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob. Complete all as directed and shown on drawing. |
| 30 | CHAIR COMPUTER/ REVOLVING CHAIR (FD/E6/MAP/01) :- |
| 31 | Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully .Removing the existing torn out tapsetry cloth, pressed foam cushion,elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 32 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge. |
| 33 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed Engr -in -charge. |
| 34 | Removing unserviceable hydraulic cylinder system having forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed by Engr -in charge. |
| 35 | Removing unserviceable pedestal assembly. S&F new pedestal (Chromium) with 5 wheels assemble with hydraulic cylinder system suitable for chair computer all as specified and directed by Engr -in charge. |
| 36 | Gun Painting to all steel portion of chair computer with two coats of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth. |
| 37 | CHAIR REVOLVING, MAKE- GODREJ/FEATHERLITE/DURAIN/TP, MODEL:- LEATHERETTE |
| 38 | Remove the unserviceable/damaged Leatherette seat from each chair by unscrewing. Supply and fix new seat as per existing model of Godrej/ Featherlite/ Durain make . Complete all as specified and as directed by the Engineer-in-Charge |
| 39 | Remove the unserviceable/damaged leatherette back from each chair by unscrewing. Supply and fix new back as per existing model of Godrej/ Featherlite/ Durain make . Complete all as specified and as directed by the Engineer-in-Charge |
| 40 | Removing old unserviceable arm rest of chair and S&F new arm rest as per existing model of Godrej/ Featherlite/ Durain make all as specified and directed by Engr -in -charge. |
| 41 | Removing old unserviceable Hydraulic cylinder of chair and S&F new hydraulic cylinder as per existing model of Godrej/ Featherlite/ Durain make all as specified and directed by Engr -in -charge. |
| 42 | Removing unserviceable pedestal assembly,supply and fixing new pedestal assembly having five arms with twin wheel castor wheels having wheel base matching with the existing model of Godrej/ Featherlite/ Durain make. Complete all as directed and shown on drawing. |
| 43 | CHAIR REVOLVING, MAKE- GODREJ/FEATHERLITE/DURAIN/TP, MODEL:- MESH TYPE |
| 44 | Remove the unserviceable/damaged injection-moulded seat from each chair by unscrewing. Supply and fix new seat as per existing model of Godrej/ Featherlite/ Durain/ TP make . Complete all as specified and as directed by the Engineer-in-Charge |
| 45 | Remove the unserviceable/damaged mesh back from each chair by unscrewing. Supply and fix new mesh back with back rest as per existing model of Godrej/ Featherlite/ Durain/ TP make. Complete all as specified and as directed by the Engineer-in-Charge |
| 46 | Removing old unserviceable arm rest of chair and S&F new arm rest as per existing model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 47 | Removing old unserviceable Hydraulic cylinder of chair and S&F new hydraulic cylinder as per existing model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 48 | Removing unserviceable pedestal assembly,supply and fixing new pedestal assembly having five arms with twin wheel castor wheels having wheel base matching with the existing model of Godrej/ Featherlite/ Durain/ TP make. Complete all as directed and shown on drawing. |
| 49 | Remove the unserviceable/damaged head rest from each chair by unscrewing. Supply and fix new head rest as per existing model of Godrej/ Featherlite/ Durain/ TP make. Complete all as specified and as directed by the Engineer-in-Charge |
| 50 | Auditorium Chair with Push Back Mechanism. Make : Innovative/ TP |
| 51 | Removing broken/unserviceable armrest of chair and S&F new armrest as to match with the existing all as specified and directed |
| 52 | Removing the torn and worn-out foam and cloth upholstery from the chair seat, and supplying and fixing new foam with cloth tapestry cushioning and rexine of approved quality, matching the original specifications, complete in all respects as directed |
| 53 | Removing the torn and worn-out foam and cloth upholstery from the chair back, and supplying and fixing new foam with cloth tapestry cushioning and rexine of approved quality, matching the original specifications, complete in all respects as directed |
| 54 | Labour for removing unserviceable Push Back Mechanism and S&F new push back mechanism of superior quality as to match with the existing all as specified and directed |
| 55 | Labour for removing unserviceable PVC Back cover and S&F new PVC back cover of superior quality as to match with the existing all as specified and directed |
| 56 | Labour for removing unserviceable PVC Seat cover and S&F new PVC seat cover of superior quality as to match with the existing all as specified and directed |
| 57 | Chairs CBA steel with & without cushion |
| 58 | Removing existing unserviceable Seat of Chair CBA steel without cushion and S&F new Seat with cushion as per Godrej pattern and fixed. complete all as specified and directed. |
| 59 | Removing existing unserviceable Back of Chair CBA steel without cushion and S&F new back with cushion as per Godrej pattern and fixed. complete all as specified and directed. |
| 60 | S&F tubular iron frame (25mm Dia x 3mm Thick) as per drawing of chair CBA steel with arm complete all as specified and as directed. |
| 61 | Removing existing damaged set of arms and replaced with new set of arms made of teak wood. complete all as specified and as directed. |
| 62 | VISITOR CHAIR/ CHAIR WRITING, MAKE-GODREJ/ FEATHERLITE/ DURIAN/ TP |
| 63 | Removing the unserviceable/damaged injection-moulded seat along with tapestry cloth from each chair by unscrewing. Supply and fix new seat with sewed tapestry cloth of approved shade and model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 64 | Removing the unserviceable/damaged injection-moulded back along with tapestry cloth from each chair by unscrewing. Supply and fix new back with sewed tapestry cloth of approved shade and model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 65 | Removing by unscrewing the existing seat and back from each chair carefully, then removing the damaged/faded tapestry cloth and damaged elastic webbing tape from each chair. The seat and back shall be duly covered with new tapestry cloth of approved colour and texture by the Engineer-in-Charge. The rate of the cloth shall not be less than ₹450 per metre. The seat and back shall be fully upholstered with new webbing tape, complete, all as specified and as directed. |
| 66 | Removing old unserviceable set of arm rest of chair and S&F new set of arm rest as per existing model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 67 | Removing exisiting damaged Mild Steel tubular structure of chair. S&F with new Mild steel tubular structure as per existing model of Godrej/ Featherlite/ Durain/ TP make all as specified and directed by Engr -in -charge. |
| 68 | Painting to all steel portion of chair with two coats of synthetic enamel black gun paint after cleaning, dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth. Complete all as directed as per model of the chair. |
| 69 | CHAIR WRITING ,FD/E6/MAP/12 |
| 70 | Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully .Removing the existing torn out tapsetry cloth ,pressed foam cushion,elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 71 | Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge. |
| 72 | Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth. |
| 73 | TABLE OFFICE OFFICER STEEL,FD-1003 |
| 74 | Removing the existing unserviceable top from table office officers steel carefully;supply and fixing new top of size 1680mmx870mm made of 18 mm thick prelaminated MDF board exterior grade [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing. |
| 75 | Removing the existing unservicable /rusted drawer complete from table office officer steel; supply and fixing new drawer made of 1mm MS sheet as per size and dimension. Complete all as directed and shown on drawing. |
| 76 | Removing the existing unserviceable lock from drawers and shutters of table office officers steel;supply and fixing new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 77 | Continous gas welding to all broken joints of table in length of 10 cms |
| 78 | Removing the old broken PVC shoes from the legs of table,Supply and fixing new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom. |
| 79 | Material and labour for painting each table office officer steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only. |
| 80 | CHAIR WITH DESKLET MAKE-GODREJ/TP |
| 81 | Removing by unscrewing the unserviceable damaged Seat & back from each chair carefully .Removing the existing torn out tapsetry cloth ,pressed foam cushion,elastic webbing tape from each seat and back.The seat and back shall be fully upholstered by using new 60mm thick 40 density foam sheets and new webbing tape.The seat and back shall duly covered with new tapestry cloth of approved colour and texture ,the rate of cloth shall not be less than 450 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed. |
| 82 | Removing the existing unserviceable / broken hand board of Chair and supply and fixing with screws new hand board made out of 18 mm thick prelaminated MDF Board [ISI Marked] one side decorative and other white with 4mm teak wood edging all around the hand board.Complete all as directed and shown on drawing. |
| 83 | Removing the unserviceable desklet from the chairs carefully and supply and fixing new desklet made of 2mm dia wire as per existing shape and dimension. Complete all as directed and shown on drawing. |
| 84 | Painting to all steel portion of chair with desklet with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing. |
| 85 | CHAIR SCHOOL WITH HAND BOARD,FD/E6/MAP/05 |
| 86 | Removing the existing unserviceable / broken hand board of Chair school with hand board and supply and fix new hand board made out of 18 mm thick prelaminated partical board exterior grade [ISI Marked] one side decorative and other white with 4mm teak wood edging all around the hand board.Complete all as directed and shown on drawing. |
| 87 | Material and labour for removing the existing unserviceable one piece PVC seat and back and supply and fix new one piece seat and back to Chair school with hand board.Complete all as directed and shown on drawing. Make of one piece seat and back : Nilkamal/Supreme/Cello/AMKO/Blow plast. |
| 88 | Material and labour for removing the existing foot rest wire mesh of chair school and S & F the same with new one duly welded to match with existing complete all as specified, as directed and as shown on drawing. |
| 89 | Material and labour for painting each chair by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete chair.The painting to each article shall only be carried out by spray machine only. |
| 90 | ALMIRAH LARGE STEEL,FD-67(M)/ 1031 |
| 91 | Removing the existing unserviceable/damaged door shutter (2 Nos) carefully by removing the hinges and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape to almirah large steel. Complete all as directed and shown on drawing. |
| 92 | Removing the existing unserviceable lock from shutters of almirah large steel;supply and fixing new 6 lever lock with duplicate keys. Perfectly fitted as Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 93 | Removing the existing unserviceable handle from the almirah steel and supply and fixing new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters ,Complete all as directed and shown on drawing |
| 94 | Removing the existing unserviceable/damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing. |
| 95 | Removing the existing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing. |
| 96 | Removing the existing unserviceable legs from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts. Supply and fixing new legs made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing. |
| 97 | Removing the existing damaged/unserviceable MS sheet panels on three sides of the almirah (excluding the door) carefully using a cutting machine, without disturbing the remaining structure. Providing and fixing new panels made of 1 mm thick mild steel (MS) sheets in place of the removed portions. The sheets shall be cut to required size, properly aligned, and fixed to the existing frame by welding and riveting as necessary. Complete, as per site requirements and as directed by the Engineer-in-Charge, in accordance with the approved drawing |
| 98 | ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032 |
| 99 | Removing the existing unserviceable/damaged door shutter carefully by removing the hinges and supply and fixing new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing. |
| 100 | Removing the existing unserviceable lock from shutter of almirah medium steel;supply and fixing new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 101 | Removing the existing unserviceable handle from the almirah med steel and supply and fixing new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters ,Complete all as directed and shown on drawing |
| 102 | Removing the existing unserviceable/damaged shelf carefully by removing the rivets and welding spots and supply and fixing new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing. |
| 103 | Removing the existing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and supply and fixing new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing. |
| 104 | Removing the existing unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.Supply and fixing new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing. |
| 105 | Removing the existing damaged/unserviceable MS sheet panels on three sides of the almirah (excluding the door) carefully using a cutting machine, without disturbing the remaining structure. Providing and fixing new panels made of 1 mm thick mild steel (MS) sheets in place of the removed portions. The sheets shall be cut to required size, properly aligned, and fixed to the existing frame by welding and riveting as necessary. Complete, as per site requirements and as directed by the Engineer-in-Charge, in accordance with the approved drawing |
| 106 | Book case steel DRG.NO. FD-45/90 /1028/1047/69 |
| 107 | Labour for removing unserviceable lock of Book Case Steel and S & F new lock with duplicate keys of approved make all as specified and as directed by Engineer-in-Charge. |
| 108 | Labour for removing the old broken glass and S&F new plain glass of existing thickness for door shutters of Book case steel (FD - 90/1028) |
| 109 | Remove the existing unserviceable or damaged steel portion carefully, and replace it with a new steel sheet of identical size and shape. Ensure proper welding and complete the work strictly as per the instructions and details provided in the drawing. |
| 110 | Cabinet Filing |
| 111 | Remove the existing unserviceable or damaged steel drawer portion carefully, and replace it with a new steel sheet of identical size and shape. Ensure proper welding and complete the work strictly as per the instructions and details provided in the drawing. |
| 112 | RACK SHOE STEEL,FD/E6/MAP/02(R) |
| 113 | Supply of new legs (U shaped) made out 25mm dia MS pipe 18 gauge and to be welded with 5 compartment of shelves. Complete all as directed and shown on drawing. |
| 114 | Supply of new wire mesh (Jali) shelves (5 nos) made out of 3mm dia MS rods, surrounded by closed loop of 20mm dia MS rod of 18 guage and to be welded with 2 legs. Complete all as directed and shown on drawing. |
| 115 | S & F new PVC shoe suitable to the leg complete all as specified and shown on drawing. |
| 116 | TEAPOY VERANDAH,FD-35/255 |
| 117 | Removing the existing unserviceable top from teapoy verandah carefully;supply and fixing new top of size 900mmx450mm made of 18 mm thick prelaminated MDF board exterior grade [ISI Marked] one side decorative and other white duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing. |
| 118 | Supply and fix new PVC shoe suitable to leg after removing the unserviceable shoe complete all as directed and as shown on drawing. |
| 119 | TABLE BED SIDE, FD/MAP/15(R) :- |
| 120 | M & L 18mm thick Prelaminated particle board, laminated one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in side/front/back/drawer of Table bedside with PVC edging (Drg No FD/MAP/15(R)) including taking out old unserviceable board complete all as specified and directed by Engineer-in-Charge. |
| 121 | S & F 50mm long, brass, chromium plated handle suitable for Table bed side. complete all as specified. |
| 122 | Chair Verandah |
| 123 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide or as per drawing of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete painting process as specified and as shown on drgs. |
| 124 | BED HARD STEEL (FD/E6/MAP/08(R) |
| 125 | Removing of old unserviceable PVC Shoes,Supply and fixing of new High quality hard PVC shoes of size 38mm x 38mm,Complete all as specified and showin in drg. |
| 126 | Removing of old unserviceable prelaminated particle board from head board ,Supply and fixing in position with new cut piece at head board of size 638mm x 201mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw.complete all as specified and shown on drg. |
| 127 | Removing of old unserviceable prelaminated particle board from foot board,Supply and fixing in position with new cut piece at foot board of size 638mmx314mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw .complete all as specified and shown on drg. |
| 128 | Removing of old unserviceable ply top,Supply and fixing in position with new top of 12mm thick Plywood BWR grade -AA of size 1974mm x 824mm duly fixed with 12 x Nos of 50mm long 6mm dia flat head nut , bolts and washers. complete all as specified and shown on drg. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
