Tender For special Repair Of Bldg No P-08 (Unit Institute And Trade Man Shop) Of Certain Mil Unit Under Ge (S) Binnaguri
Tender Value
38.83 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
1 days left
EMD
77700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Binnaguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-08 (Unit Institute And Trade Man Shop) Of Certain Mil Unit Under Ge (S) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Jul-2026 |
| 2 | 02-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar of any description. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for truss etc complete all as specified |
| 4 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified |
| 5 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 6 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base finishing the surface even and rough to receive the topping layer or tiling complete . |
| 7 | M&L for machine cut kota stone slab flooring 20-25mm thick, for staircase steps (treads) in single piece (of length not more than 1200mm), laid over & including 15mm thick (average thickness) cement mortar (1:6) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) including provn of two Nos 3x3 mm grooves at tread of each step complete all as specified |
| 8 | M&L for machine cut kota stone slab 15-20mm thick on vertical surfaces like riser of steps, skirting, in single piece (of length not more than 1200mm) over & including 15mm thick (average thickness) cement mortar (1:4) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified |
| 9 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified |
| 10 | M & L for glazed ceramic colour tiles 300X 450 X 7 mm thick as on cup board vertical surface of wall such as skirting, dado, riser etc. in Bath, WC and Kitchen set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified |
| 11 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified. |
| 12 | M&L brickwork with fly ash birck straight or curved to plan any radius built in cement mortar 1:6 by using old size bricks etc all as specified |
| 13 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 1.5 KM incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified |
| 14 | M&L for cement concrete type Bo 1:2:4 (using 12.5mm graded stone aggregate} 25mm thick as in roof to achieve slope on existing roof surface complete all as specified |
| 15 | M & L for water proofing treatment to RCC roof slab as specified below and complete all as specified :- (a) 10 mm th cement plaster in CM 1:4 with integral WPC to be laid over the RCC roof slab when the concrete is green. (b) Applying a uniform coat of bitumen primer @ 0.70 kg/sqm over cement plaster. (c) 3 mm thick plain texture and weighing not less than 3.5 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster matt black finished over compatible primer at 0.4 Ltr / sqm of density at 25 degree centigrade 0.87 - 0.89 kg/Itr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while touching shall be 150 mm on length side and 100 mm on width side. after necessary preparation of surface complete as per manufacturersinstructions. (d) Apply two coats of bitumastic - aluminium paint over the membrane. |
| 16 | M&L for cement concrete Type B1,1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges. |
| 17 | Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site. |
| 18 | S & F for in repair 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including finishes of disterub surfaces of wall etc, complete as specified |
| 19 | M & L for providing plain cement concrete type C-1, 1 :3:6, (using 20 mm gradedstone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified |
| 20 | S&F 35mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified |
| 21 | S& F of 140mm Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor complete all as specified |
| 22 | S&F 100 mm butt hinges stainless steel complete all as specified |
| 23 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified |
| 24 | S&F aluminium handles 150mm size cast type anodised complete all as specified |
| 25 | S&F for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as Specified. |
| 26 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as Specified. |
| 27 | Supplying and fixing in repair factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Area not exceeding 2.00 sqm) |
| 28 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading in square exc 0.5 Sqm in each pane complete all as specified |
| 29 | S&F in repair factory made steel ventilator with top hung shutter including friction/box Sqm type hinges,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified |
| 30 | M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165 |
| 31 | Taking down chowkat with shutter n. exc. 1.5sqm each complete all as specified |
| 32 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as Specified. |
| 33 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as Specified. |
| 34 | S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified |
| 35 | S&F aluminium handles 125 mm size cast type anodised complete all as Specified. |
| 36 | Taking down of cement plaster on brick (or) concrete wall including racking out joints hakins for key sinebling down with water etc complete all as specified |
| 37 | M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water proofing compound finished even and fair complete all as specified (Note: WPC shall be measured and paid separately) |
| 38 | Supply only intergral water proofing compound (WPC) of best quality complete all as specified |
| 39 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1 :6 finished even and smooth without using extra cement complete all as specified |
| 40 | M&L rendering 5mm thick in CM (1 :3) on fair faces of concrete surfaces as in celling finished fair and even without using extra cement complete all as specified |
| 41 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth |
| 42 | S & F 2mm thick wall care putty (in two layers)on wall/ceiling complete all as specified |
| 43 | M & L for Plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 44 | M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shade :Old work (Two or more coat applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm). |
| 45 | M&L for preparing new plastered surfaces of wall and applying three coat of white wash on ceiling complete all as specified. |
| 46 | M&L for preparing old plastered surfaces of wall and applying two coat of white wash on ceiling complete all as specified. |
| 47 | M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 48 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 49 | Dismantling water tanks and removing from site of capacity 1000 ltrs complete all as specified |
| 50 | S & F 1000 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl necessary fittings for connection with pipes securing access covers etc as specified |
| 51 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete. |
| 52 | S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 53 | Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified |
| 54 | Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store. |
| 55 | S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified |
| 56 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified |
| 57 | S&F 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified |
| 58 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified |
| 59 | S&F in repair for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 60 | S&F of Stainless Steel soap dish of approximate size of 160x160x90mm fixed to the wall with SS screws complete all as specified |
| 61 | S&F in repair cp towel ring complete all as specified |
| 62 | S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 63 | Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings. |
| 64 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 65 | S&F 110mm dia PVC bends of any radius with acess door complete all as specified |
| 66 | S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door. |
| 67 | S&F 110mm dia PVC SWR vent cowl complete all as specified |
| 68 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 69 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified |
| 70 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 71 | S&F in repair Vitreous China wash basin Pedestal pattern, white, flat back size 580x450 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified |
| 72 | S&F 15 mm fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 73 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified |
| 74 | S&F of in repair vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified |
| 75 | S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified |
| 76 | S&F in repairs Bib taps long body fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified |
| 77 | S&F in repair 15 mm bore angle cock CP with flage complete all as specified Please Enable Macros to View BoQ information |
| 78 | S&F in repair 15 mm bore angle cock CP with flage complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender