|
| 1 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc (for taking out and laying pipe etc) not exc 10 Sqm in plan and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, as in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 4 | Taking up 150 mm bore cast iron pipes (including all fittings) with spigot and socket end and lead joints including burning out lead joints and recovering lead complete all as specified and directed. (Note : Excavation and earth work shall be measured and paid seperately.) |
| 5 | All as per Ser item No 04 above but size 100 mm bore complete all as specified and directed. |
| 6 | Supply, laying, connection and testing in replacement of 150 mm bore, ductile iron pressure pipe centrifugally cast (spun) with spigot and socket ends, class K-7 and confirming to IS 8329 - 2000 with push on rubber gasket jointing inside with cement mortar lining and outside zinc coating with finishing layer of black bitumen/blue epoxy coating duly ISI marked in any length laid in trenches complete all as specified and directed. |
| 7 | All as per Ser item No 06 above but size 100 mm bore complete all as specified and directed. |
| 8 | S&F in replacement of 200mm bore, cast iron sluice valve both end flanged, class PN 1.6 conforming to IS -14846 (raising stem type) with iron wheel head and stainless steel spindle including necessary jointing materials like nuts, bolt, washer & rubber/fiber board gasket including taking up/down old sluice valve complete all as specified and directed. |
| 9 | All as per Ser Item No.08 above but size 150 mm bore complete all as specified and directed. |
| 10 | All as per Ser Item No.08 above but size 100 mm bore complete all as specified and directed. |
| 11 | All as per Ser Item No. 08 above but size 80 mm bore complete all as specified and directed. |
| 12 | S&F in replacement of 150mm bore, cast iron butter fly valve both end flanged, class PN 1.6 conforming to relevant IS lever operated including necessary jointing materials like nuts, bolt, washer & rubber/fiber board gasket including taking out existing one complete all as specified and directed. |
| 13 | All as per Ser Item No.12 above but size 100 mm bore complete all as specified and directed. |
| 14 | All as per Ser Item No.12 above but size 80 mm bore complete all as specified and directed. |
| 15 | All as per Ser Item No.12here-in-before but size 50 mm bore complete all as specified and directed. |
| 16 | S&F in replacement of 100 mm bore, Cast iron Non-return (reflux) valve, flange type with by-pass arrangement suitable for 100 mm dia water mains conforming to IS-5312 Part-I class PN 1.6 including takind down existing one complete all as specified and as directed. |
| 17 | Taking up or down 100 mm bore galvanised steel tubing /PPR including connections from trenches/wall/floor/ceiling etc complete all as specified and directed.Note for 17 to 23 : Excavation of earth shall be measured and paid separately under respective item. |
| 18 | All as per Ser item No 17 above but size 80 mm bore complete all as specified and directed. |
| 19 | All as per Ser item No 17 above but size 50 mm bore complete all as specified and directed. |
| 20 | All as per Ser item No 17 above but size 40/32 mm bore complete all as specified and directed. |
| 21 | All as per Ser item No 17 above but size 25 mm bore complete all as specified and directed. |
| 22 | All as per Ser item No 17 above but size 20 mm bore complete all as specified and directed. |
| 23 | All as per Ser item No 17 above but size 15 mm bore complete all as specified and directed. |
| 24 | Relaying/refixing 100 & 110mm bore galvanised steel tubing/PPR pipeline only jointing and testing of old GI pipes including cleaning completely in trenches/walls/floors as directed for the following sizes :-Note for 24 to 30 : Excavation of earth shall be measured and paid separately under respective itemcomplete all as specified and directed |
| 25 | All as per Ser item No 24 above but size 80 & 90 mm bore complete all as specified and directed |
| 26 | All as per Ser item No 24 above but size 50 & 63 mm bore complete all as specified and directed |
| 27 | All as per Ser item No 24 above but size 40 mm bore complete all as specified and directed |
| 28 | All as per Ser item No 24 above but size 25 mm bore complete all as specified and directed |
| 29 | All as per Ser item No 24 above but size 20 mm bore complete all as specified and directed |
| 30 | All as per Ser item No 24 above but size 15 mm bore complete all as specified and directed |
| 31 | Supply, laying, connection and testing, in replacement of 100mm bore, Steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239(Part -2):2011 and fixtures complete laid in trenches etc complete all as specified and directed. |
| 32 | All as per Ser Item No.31 above but size 80 mm bore complete all as specified and directed. |
| 33 | All as per Ser Item No.31 above but size 50 mm bore complete all as specified and directed. |
| 34 | All as per Ser Item No.31 above but size 40 mm bore complete all as specified and directed. |
| 35 | All as per Ser Item No.31 above but size 25 mm bore complete all as specified and directed. |
| 36 | All as per Ser Item No.31 above but size 20 mm bore complete all as specified and directed. |
| 37 | All as per Ser Item No.31 above but size 15 mm bore complete all as specified and directed. |
| 38 | Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239(Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. |
| 39 | All as per Ser Item No.38 above but size 20 mm bore complete all as specified and directed. |
| 40 | All as per Ser Item No.38 above but size 15 mm bore complete all as specified and directed. |
| 41 | M&L for Making connection of PP-R distribution branch with PP-R main of size upto 40mm outer dia by providing and fixing tee including cutting and making fusion joint etc. including taking down old pipes fittings complete all as specified and directed |
| 42 | All as per Ser Item No.41 above but size upto 50 to 90 mm bore complete all as specified and directed. |
| 43 | All as per Ser Item No.41 above but size 110 mm bore complete all as specified and directed. |
| 44 | S&Fof PP-R Gate Valves of Size 20 mm outer dia (brass insert) connect to PP-R Pipe including taking down old unserviceable valve complete all as specified and directed. |
| 45 | All as per Ser Item No.44 above but size 25 mm bore complete all as specified and directed. |
| 46 | All as per Ser Item No.44 above but size 32 mm bore complete all as specified and directed. |
| 47 | All as per Ser Item No.44 above but size 40 mm bore complete all as specified and directed. |
| 48 | All as per Ser Item No.44 above but size 50 mm bore complete all as specified and directed. |
| 49 | Supply, laying, connection and testing, in replacement of 25mm outer dia 3- layer PP-R Polypropylene random co-polymer pipes SDR 7.4 (PN16) stablised and antimi-crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid seperately) |
| 50 | All as per Ser Item No.49 above but size 32 mm bore complete all as specified and directed. |
| 51 | All as per Ser Item No.49 above but size 50 mm bore complete all as specified and directed. |
| 52 | All as per Ser Item No.49 above but size 63 mm bore complete all as specified and directed. |
| 53 | All as per Ser Item No.49 above but size 90 mm bore complete all as specified and directed. |
| 54 | All as per Ser Item No.49 above but size 110 mm bore complete all as specified and directed. |
| 55 | Attending emergency breakdown of water supply installations where directed including taking out defective submersible pump set of capacity 10 to 25 HP, column pipes from bore well and transporting the defective pump set from site to MES store yard for repair and re-lowering submersible pump set including column pipes in the existing borewell and transportation of serviceable pump set from MES store yard to borewell and install, testing, commissioning the same in existing position and making water supply and electric connection as per existing for smooth running of pump motors incl replacement of all nuts, bolts and gaskets complete all as specified and directed. |
| 56 | M&L for Rewinding of startar and rotor of submersible motor of 25 HP capacity with water proof insulated copper wire as per existing gauge to achieve the specified/required RPM including taking out old burnt out unserviceable winding complete all as specified and directed. |
| 57 | All as per Ser Item No.56 above but capacity 20 HP complete all as specified and directed. |
| 58 | All as per Ser Item No.56 above but capacity 17.5 HP complete all as specified and directed. |
| 59 | All as per Ser Item No.56 above but capacity 15 HP complete all as specified and directed. |
| 60 | M&L for submersible pump set upto 25 HP capacity with as per existing parts of pump to achieve the specified/required RPM including taking out unserviceable parts complete all as specified and directed. |
| 61 | Taking out sluice valve of any size (200/150/100/80 mm) , any type and refacing, regrinding and refixing the same at existing locations using new gasket nuts, gland packing etc complete all as specified and as directed. |
| 62 | Repacking stuffing box of sluice valve spindle (200/150/100/80 mm) , any type including taking apart and reassembling complete all as specified and directed. |
| 63 | S&F in replacement of old U/S gland packing with new to the valves/pump set of any sizes/capacity complete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size etc complete all as specified and directed. |
| 64 | M&L for 15mm bore gun metal gate valve/forged valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, IS-778 marked of following sizes including taking down old unsv :- 15 mm bore complete all as specified and directed. |
| 65 | All as per Ser Item No.64 above but size 20 mm bore complete all as specified and directed. |
| 66 | All as per Ser Item No. 64 above but size 25 mm bore complete all as specified and directed. |
| 67 | All as per Ser Item No. 64 above but size 40 mm bore complete all as specified and directed. |
| 68 | All as per Ser Item No. 64 above but size 50 mm bore. complete all as specified and directed. |
| 69 | M&L in repair of 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule of 15mm bore including taking down old unserviceable valve complete all as specified and directed. |
| 70 | S&F in repair of 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed. |
| 71 | Surface dressing n.exc 15 cm deep as in soft/loose soil and rubishes to a distance n.exc 50m including spraying pesticides (roundup or equivalent) to control the grass growth complete all as specified and directed. |
| 72 | M&L for Cleaning of valve pit chamber with sluice valve, pipes etc, 150mm to 200mm dia including replacement of existing wornout/defective gland packing, nut, bolt & washer, etc with new one to make the sluice valve perfectly leak proof including marking of flow direction of inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint after preparation of old steel surfaces valve pit cover complete all as specified and directed. |
| 73 | All as perSer item No 72 above but for 80 mm to 100 mm dia complete all as specified and directed. |
| 74 | Demolition of damaged brick masonry valve pit of size 150cm x 150cm x 100 cm (internal dimensions)including concrete work and construction of similar size valve pit with one brick thick wall in cement mortar 1 : 4 on 100 mm thick PCC 1:4:8 type D2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover made out of 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thck sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 75 | M&L for preparation of old painted steel surfaces (horizontally or vertically 18 mtr height) and applying one coat of synthetic enamel paint any description over 10 cm in width or girth not otherwise described with colour as approved including temporary bamboo stagging arrangement as required complete all as specified and as directed. |
| 76 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) complete all as specified and directed. |
| 77 | M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) in foundation of pipe supports/platform etc. including necessary form work complete all as specified and directed. |
| 78 | M&L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 79 | Burning out existing lead joint in position, including removing old lead and keeping in safe custody for re-use for CI pipe 150 mm bore complete all as specified and directed. |
| 80 | All as per Item No. 79 above but size 100 mm bore of pipe complete all as specified and directed. |
| 81 | All as per Item No. 79 above but size 80 mm bore of pipe complete all as specified and directed. |
| 82 | M&L for run lead joint for cast iron spigot and socket pipes & fittings 150 mm bore with new lead and other jointing materials complete all as specified and directed. |
| 83 | All as per Item No. 82 above but size 100 mm bore of pipe complete all as specified and directed. |
| 84 | All as per Item No. 82 above but size 80 mm bore of pipe complete all as specified and directed. |
| 85 | M&L for cast iron fittings for spigot and socketed pipe, such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and pigot) collars, caps and plugs etc upto 150mm bore complete all as specified and directed. |
| 86 | S&F in replacement of pressure gauge 100 mm dia, range 0 to 60 Kg/CM2, as per the existing make and specifications with 3/8\\" brass sampling cock and pressure gauge cock complete all as specified and directed. |
| 87 | Supply only 65-70% Calcium hypochlorite granules (in 45kg Bucket ) for treatment of water disinfiction complete all as specified and directed.Note : (a) The contractor has to produce manufactures test certificate in original indicating Batch No date of manufacturing and paid Vrs while supply of Calcium hypochlorite granules. (b) The disinfectant shall be brought at site in sealed plastic container of appropriate capacity / size. (c) The brand of chemical shall be approved by GE before in corporation of work. Batch No and date should be marked on every container. (d) The approval of product and brand should be approved by E-in-Cs branch New delhi . The product should be efficient biocide, for treatment of drinking water. |
| 88 | Supply only copper sulphate for potable water at store yard of AGE E/M of Dinjan. Make : RMCO or its equivalent make approved by E-in-C's Branch complete all as specified and directed. |
| 89 | Supply only Ferric Alum, at store yard of AGE E/M at Dinjan. Make : RMCO or its equivalent make approved by E-in-C's Branch complete all as specified and directed. |
| 90 | Supply only Soda ash at store yard of AGE E/M at Dinjan. Make : RMCO or its equivalent make approved by E-in-C's Branch complete all as specified and directed. |
| 91 | Supply of TCCA-90 Tri-Chlorosyanic Acid Granular Chlorine of 90 % strength in 50 Kgs container complete all as specified and directed. |
| 92 | S&F for automatic star delta motor starter of capacity up to 25 HP, relay max. range 17 to 25 Amp, 415 volts, 3 phase, with contactor including taking down the old/unserviceable star delta motor starter complete all as specified and directed. |
| 93 | S&F for MCCB, 4 pole, 415 V with adjustable thermal & adjustable magnetic setting, 100 Amps of breaking capacity 25 KA complete all as specified and directed. |
| 94 | S&F for MCCB, 4 pole, 415 V with adjustable thermal & adjustable magnetic setting, 63 Amps of breaking capacity 25 KA complete all as specified and as directed. |
| 95 | Supply only Chlorine test kit with colour ample packed with requred chemicals in glass containers with stirrer and test tube alongwith closed in PVC/ fibre box complete all as specified and directed. |
| 96 | Testing of water for all parameter, chemical and becteciology aspect from RRL Jorhat/DRL Tezpur (Assam) or any Govt Approved/recognised laboratory and submit the report all as specified and as directed (Note : rates quoted deemed to be incl of 1 ltr sterilised bottle per sample, tpt and manpower for collection of sample from the desired place, submission to the lab and resubmitting report to MES complete all as specified and directed. |
| 97 | M&L for Developing tube well with air compressor of suitable capacity till sand/mud free water of potable quality to be obtained and to achieve maximum discharging capacity of 30000 GPH complete all as specified and as directed. Note : Compressor with accessories and fuel shall be arranged by the contractor complete all as specified and directed. |
| 98 | M&L for Road cutting & make good after rectified the pipeline leakage work etc, complete all as specified and directed |
| 99 | S&F in repair of fencing post/hand rails, half round or other stock section including embeding in concerte and screwing etc. wind ties for roof including secruing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc and similar work confriming to fe-230 Gde E-165 complete all as specified and directed |
| 100 | S&F mild steel screw bolts with hexagonal or squre heads at one end the screwed the other to be fitted with washers and one hexagonal or squrebut exc 5 cm but n. exc 10 cm long , dia of shank 5 to 10 mm.complete all specified and directed. |
| 101 | Supply and fixing in repair of chain link fencing any size or type complete all as specified and directed. |
| 102 | Fixing only link MS galvanised fencing including line wires any mesh size and type to any of standards, rails, straining bolts etc including provission of binding wire complete all specified and directed. |
| 103 | Supply and fixing in repair of MS round bar 10mm dia and over cut to length bent to shape required includung cranking bending hooking etc and binding with MS wire 0.9 mm dia complete all specified and directed. |
| 104 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all specified and directed. Please Enable Macros to View BoQ information |
| 105 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all specified and directed. Please Enable Macros to View BoQ information |
