|
| 1 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified & directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each complete all as specified & directed. |
| 3 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and and removal from site complete all as specified & directed. |
| 4 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 7 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed. |
| 8 | S&F of 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 9 | S & F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid glazed and skelton door shutter open rebated,prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed.NOTE FOR ITEM NO 05 TO 07 & 09 : The work for WPC (Wood polymer Composite) shall include the following and the rates quoted by the bidder shall include the same:-(i) The work pertaining to WPC (Wood polymer Composite) shall be executed by the contractor as per MoU from authorised dealer through manufacturer of WPC Door frame and shutter.(ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. |
| 10 | S & F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat complete all as specified & directed. |
| 11 | M & L for preparation of new wooden or wood based surface of any description exceeding 9cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 12 | S & F stainless steel butt hinges 100mm size medium weight and fixed complete all as specified and directed. |
| 13 | S&F 250 mm Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 14 | S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. |
| 15 | S & F Stainless Steel Bow handle matte finish fabricated type 150mm long complete all as specified & directed. |
| 16 | S & F mild steel helical door spring 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 17 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 18 | S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 19 | S & F in repair factory made WPC single extruded 100% lead free ISO certified board of 18mm thick bothside pre laminated shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12-.14 microne pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. |
| 20 | S & F continuous (Piano) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed. |
| 21 | S & F 100 mm long aluminium anodised, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed. |
| 22 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 23 | S & F ball catcher with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters. |
| 24 | Providing & fixing of DOUBLE REBATE WITH AIR TIGHT GLASS SHUTTER WINDOWS made of pre-painted steel (Base steel as per IS 513 \\"D\\" Quality of 0.58mm thick galvanized as per IS 277 with zinc of 120 GSM) with total coated thickness of 0.60mm. Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer or powder coated with pure polyester powder up to 50-60 microns thick and with following section details:-(i) Section for outer frame - 98 x 50mm(ii) Section for centre mullion - 46 x 70mm(iii) Section for shutter frame - 46 x 46mm(iv) Section for fixed glass beading - 12 x 12mm(v) Section for Fly mesh shutter frame - 40x20mm(vi) T-Section - 30 x 44mmOuter frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Each Glazed Shutter should be provided with MS Powder Coated Friction Hinges – 1 set, High Grade Aluminum Powder Coated Handle -1 No. Each Mesh shutter should be provided with S.S.Pivot Hinges-1 set, Elixir make or equivalent handle shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Windows should be provided with grill made of 10mm square bars welded at 150mm c/c, 6mm x 12mm MS flat and the grill should be powder coated and fixed to window frame with screws. The windows should include proper cutout for AC/coolers and design approved by Engineer in Charge complete all specified and directed. |
| 25 | Supply & fixing Factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality incl Glass and wiremesh, complete all as specified and directed by Engineer-in-Charge.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | M & L for Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6mm complete all as specified.and directed. |
| 27 | S & F in repair mortice lock 2 levers aluminium, vertical type, size 100 mm complete all as specified and directed. |
| 28 | S & F in repair aluminium (die cast) body door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 29 | S & F in repair two(double) legged floor door stopper of aluminum body & tougues anodess with hard drawer steel spring fixed in floor of over all length of cover plate 140mm complete all as specified and directed.. |
| 30 | Supply and fixing in repairs stainless steel peg set (06 Nos hook) etc complete all as specified and directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed. |
| 32 | S & F Sheet glass 4mm thick ordinary quality and glazing with rubber bedding etc in suqares n exc 0.5 Sqm in each pane complete all as specified.and directed. |
| 33 | S & F 4 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 34 | S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed. |
| 35 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 36 | M & L for prepration of new steel surface of any description exceeding 9cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of red oxide primer complete all as specified and directed. |
| 37 | M & L brickwork with fly ash bricks, Modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed. |
| 38 | M & L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar complete all as specified and directed. |
| 39 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish complete all as specified and directed. |
| 40 | M&L for repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed. |
| 41 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of Priming complete all as specified and directed. |
| 42 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 43 | M & L preparation of new surfaces of of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. |
| 44 | M&L for applying two coats of cement based paint incl cleaning the old surface and removing the dust from the wall complete all as specified and directed. |
| 45 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 46 | M & L for premium quality joint free ceramic tiles, coloured, any shade superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 47 | M & L for joint free glazed coloured GLOSSY tiles, superior quality of size 300x450x7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed. |
| 48 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.& including screed bed or bedding layer 15mm th in cement mortar 1:4 including dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 49 | M & L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregae) as in floors, finished even and smooth using extra cement including demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and directed. |
| 50 | M & L for 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long, including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed. |
| 51 | Demolition of PCC (un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels complete all as specified and directed. |
| 52 | M & L hard core of broken stone gauage not exc 63 mm deposited spread and levelled n.exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and directed. |
| 53 | M & L cement concrete 75 mm thick 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base for paver block etc complete all as specified and directed. |
| 54 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 55 | M & L for 400x400x20-25mm thick Exterior grade Heavy duty tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM (1:4) incl dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 56 | M & L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 57 | M & L for galvanized steel water tubing medium grade of 15mm bore with & including all fittingS & fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 58 | M & L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings & fixed complete to walls and ceilings or laid in floors. including taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed. |
| 59 | M & L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 60 | S & F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. |
| 61 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe complete all as specified and directed |
| 62 | S & F in repair vitreous china Wash hand basin flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed (excluding tap, waste chain & plug) complete all as specified and directed. |
| 63 | S & F in repair Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe 32 mm dia and Waste coupling of PTMT any colour half of full threaded suitable for 32 mm dize discharge pipe complete all as specified and directed.. |
| 64 | S & F in repair 10 ltrs capacity PVC valveless syphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 65 | S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed. |
| 66 | S & F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. |
| 67 | S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed. |
| 68 | S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 69 | S & F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 70 | S & F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & Flynuts, screwed for iron pipeS & Fixed for 15mm dia complete all as specified and directed. |
| 71 | S & F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 72 | S & F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with round spout with waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed. |
| 73 | S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed. |
| 74 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 75 | S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed. |
| 76 | S & F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed. |
| 77 | S & F in repair Brass spindle for Bib cock/stop cock fancy type bib taps/stop cock complete all as specified and directed. |
| 78 | S & F in repair brass spindle for concealed stop cock, wall mixer, WHB mixture complete all as specified and directed. |
| 79 | S & F 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed. |
| 80 | S & F 1000 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed. |
| 81 | S & F 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed. |
| 82 | S & F in repair 15 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 83 | S & F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 84 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 85 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps complete all as specified and directed. |
| 86 | S & F in repair 600x450x5mm thick bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or PVC sheet and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 87 | S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed. |
| 88 | S & F in repair Toilet paper holder, CP box type complete all as specified and directed. |
| 89 | S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed. |
| 90 | S & F in repairs PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete all as specified and directed. |
| 91 | S & F in repair PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed. |
| 92 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections & fixed in position complete as specified superior quality complete all as specified and directed. |
| 93 | S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed. |
| 94 | S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed. |
| 95 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 96 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 97 | S & F in repair of false ceiling at all heights with GRG (Glass Fibre reinforced Gypsum) 12mm thick micro tegular edged semi perforated false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.5 to 0.75 as per IS 8225:1987, Non-combustible as per BS-476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications and drawing complete all as specified and directed. |
| 98 | S & F in repair Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall fixed 35cm centre to centre on both side horizontal and vertical to make PVC Frame as per specifications and drawing complete all as specified and directed. |
| 99 | S & F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 100 | S & F 12mm thick toughened glass as in hinged doors, fixed partitions, automatic doors and similar work including cutting to shape, drilling holes required including scaffolding (if required) upto double storeyed height complete all as specified and directed. |
| 101 | S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. Please Enable Macros to View BoQ information |
