|
| 1 | SITC of |
| 2 | \\"11/0.433 kV, 630 kVA, 3-Phase, Copper Wound, ONAN, Dyn11, Energy Efficiency Level-2 Distribution Transformer conforming to IS 1180 Part-1 latest, complete with HV/LV bushings, Off Circuit Tap Changer ±5%, LV Cable Box, Bimetallic Connectors, Silica Gel Breather, Oil Level Indicator, PRD, Rating Plate and all standard accessories.Transformer should have arrangement for vertical Take off |
| 3 | Gapless Surge Arrestor 9 kV, 10 kA, LA with polymer housing, Station Type |
| 4 | 11 kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 5 | 11 kV Horn Gap Fuse Set 3 Phase 200A |
| 6 | 300 mm² (2C×630 mm²) XLPE insulated stranded conductor FRLS type |
| 7 | 9 Mtr. Long Pole (ST-410 SP33) |
| 8 | 11 kV Polymer composite Disc Insulator 12 kV, min failing load 45 kN, Lightning Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm |
| 9 | GI Channel/Angle/Flat of sizes including clamps for LA set/G.O set/Horn Gap |
| 10 | Galvanized Nuts and Bolts |
| 11 | Earthing of substation – excavation of earth pit, GI strip, electrodes, chamber, etc. |
| 12 | Transformer RCC bed (8'5'6) |
| 13 | 11 kV Polymer composite Pin Insulator 12 kV, 5 kN, Lightning Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm |
| 14 | LT Distribution Box for 630 kVA DTR with MCB for incomer & outgoing |
| 15 | Galvanized Stay Set with 50×8 mm stay clamp, guy insulator, anchor plate, stay rod, etc. |
| 16 | Wedge Connectors / PG Clamps |
| 17 | Danger Plates with Clamps |
| 18 | GI Barbed Wire for Anti Climbing |
| 19 | Cement bottoming 1:2:4 mix as per REC standards, 0.5 cum/pole |
| 20 | Painting of Poles – Red Oxide |
| 21 | Painting of Poles – Aluminium Paint |
| 22 | Sundry items like aluminium lugs, jumpers, binding tape |
| 23 | HT CT/PT Unit oil immersed type with Tri- Vector (With Smart Meter) Please Enable Macros to View BoQ information |
