Tender For Special Repair To Bldg No T-73 At 281 And Provn Of Ceiling Fan At 427 And Ups At Ads At Tezu Under Ge (P) Lohitpur
Tender Value
19 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-73 At 281 And Provn Of Ceiling Fan At 427 And Ups At Ads At Tezu Under Ge (P) Lohitpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jun-2026 | Revised BOQ | BOQ | 25-Jun-2026 |
| 2 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 2 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 3 | Dismantling structural steel work including doors, gates and Window but excluding framed truss etc. complete all as specified and directed |
| 4 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 5 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strength not less than 75 kg/Sq cm all as specified and directed. |
| 6 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified. |
| 7 | M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly plastered wall all as specified and directed. |
| 8 | M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing (Grade A )Compound complete all as specified and directed. |
| 9 | M & L for cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 10 | M & L for 25 mm thick cement concrete 1:2:4 type B-0, (unisng 12.5mm graded crushed stone aggregate) as in flooring complete all as specified and directed. |
| 11 | M&L Formwork to sides of concrete foundations, Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Rough finished for flat surfaces complete all as specified and as directed. |
| 12 | M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | Ditto, TMT Bar but 6mm to 8mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 14 | M&L for Non - skid Ceramic tiles 7 to8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in cement mortar 1:4 to complete all as specified and directed. |
| 15 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4. |
| 16 | M & L 75 mm thick cement concrete 1:3:6 type C- 2, (using 40mm graded aggregate) as in plinth protection including necessary formwork complete all as specified and directed. |
| 17 | M &L for Non asbestos fibrocement building boards 4 mm thick of size 600mm x 600mm fixed or laid/ inserted to timber/ GI/ Aluminium framework with screw complete all as specified and directed. |
| 18 | S&F Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm for celling with Gl frame work for seamless ceiling comprising of G l perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners wit mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 19 | Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, |
| 20 | S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 21 | S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. Complete all as specified. |
| 22 | S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty with rubber packing in squares exc 0.5 sq. m in each pane in squares. |
| 23 | Supply and fix, 40 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed |
| 24 | S&F 35 mm thick 2nd class hard wood Glazed and Skelton shutter (minimum three panel) open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified all as specified and directed |
| 25 | S&F Stainless steel wire cloth.0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with 20mm pvc bidding |
| 26 | S & F Butt hinges, medium weight, cold rolled mild steel 100 mm, and fixed complete all as specified and directed. |
| 27 | S & F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 28 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | S & F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | M & L for 15 mm thick Rendering in cement mortar 1:4 on other than fair faces of brickwork or concrete surface without using extra cement .complete all as specified and directed. For external surface |
| 31 | M&L for two coat of synthetic enamel paint over a coat of Pink Primer, including preparation of new untreated wooden surface over 10 cm width complete all as specified and directed. |
| 32 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 33 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 34 | M& L for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 35 | S& F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 36 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed. |
| 37 | S&F WHB Vitreous china wash basin, angle back, size 550x400mmwhite, excluding taps, waste, chain and plug and porcelain stopper but including brackets and fixing and pedestal complete all as specified and as directed. |
| 38 | S&F Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 39 | S&F sinks made of stainless-steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 40 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 41 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 42 | M&L for reinforced cement concrete 1:2:4 TYPE B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 43 | Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-charge. |
| 44 | Material and labour for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe. 290.Gde-E-165 |
| 45 | S & F for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete. |
| 46 | S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm for 30mm dia pipe |
| 47 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer of capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon |
| 48 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-charge. |
| 49 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe all as specified and directed by Engr-in-charge. |
| 50 | S&F 15mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make: - Jandal/ Prakash /TATA |
| 51 | S&F 20mm bore tubes medium grade galvanized with all fittings such as sockets, elbows, unions, Tees & short and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make: - Jandal/ Prakash /TATA |
| 52 | M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required using expended metal in required size and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good , cutting exceed 10 cm but not exceeding 20cm girth complete all as specified and as directed. |
| 53 | S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls |
| 54 | PVC (SWR) floor trap with grating 75 mm dia incl jointing with solvent cement |
| 55 | M&L for 32 mm bore low density polyethylene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 56 | M&L for 40 mm bore low density polyethylene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 57 | S&F fancy type drapery rods with brackets 20-25mm bore cut to length as required of colour as selected & directed by Engr-in -Charge. |
| 58 | S & F for Stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete. |
| 59 | S & F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete. |
| 60 | S & F for Grating doom 100 mm dia of PTMT (Minimum weight 25gms) fixed complete. |
| 61 | S & F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed complete. |
| 62 | S & F for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed. |
| 63 | PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 64 | S&F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 65 | M&L for two coat of synthetic enamel paint including preparation of old steel surface over 10 cm width complete all as specified and directed. |
| 66 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials all as specified and directed by engineer in charge. |
| 67 | M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLH/S in and including concealed PVC conduit 20/25 mm dia medium duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good surface the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 68 | All as per item No. 67 above but 3 pin 5 amps socket out let point with the same board with other switches with cables of 1.5 Sqmm size all as specified and directed. |
| 69 | All as per item No. 67 above but for one 5 amp socket on independent board with cables of 1.5 sqmm size |
| 70 | All as per item No. 67 here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engr-in-charge. |
| 71 | Supply and fixed sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 2 modules complete all as specified and directed by Engr-in-charge. |
| 72 | -do- all as per item No 71 above but for 3 modules complete all as specified and directed. |
| 73 | -do- all as per item No 05 above but for 6 modules complete all as specified and directed. |
| 74 | -do- all as per item No 71 above but for 8 modules complete all as specified and directed. |
| 75 | S/F modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules. ( Note switch and sockets will be measured and paid separately) |
| 76 | -do- all as per item No. 75 above but for 3 modules all as specified and directed. |
| 77 | -do- all as per item No. 75 above but for 6 modules all as specified and directed. |
| 78 | -do- all as per item No. 75 above but for 8 modules all as specified and directed. |
| 79 | S&F switch piano modular flush type 5/6 Amps 230V AC complete one way all as specified and directed. |
| 80 | S&F Switch socket Combination 16A, 6 pin, 3 module complete all as specified and as directed. |
| 81 | S&F modular socket out let 3 pin 5 Amps flush type complete all as specified and as directed. |
| 82 | S & F modular electronic step type fan regulator by step type 230 volt. complete all as specified and as directed. |
| 83 | S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as specified and directed by engineer in charge |
| 84 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 85 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 86 | S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 87 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning of |
| 88 | S&F SPN 40 to 63 AMP amps 240 volts 10KA breaking capacity complete all as specified. |
| 89 | S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqmm as earth lead drawing into rigid non metalic PVC casing caping of size 20 mm including taking down old unsv. Note: Three run of 4 sqmm cable will be measured as single length. |
| 90 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps all as specified and directed. |
| 91 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 92 | Supply installation commissioning of Water Heater Storage Type Electric Cap 25 Ltrs Single Phase 240V, 50 Hz BEE 5 Star rated incl all as specified and directed. |
| 93 | Material and Labour for surface Casing and Capping point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through Casing and Capping of suitable size, complete with all accessories/ fittings, tees , L- bends , brass screws, washers etc, PVC modular boxes to accomodate modular switches including PVC insulated copper earth continuity conductor 2.5 Sqmm cable connected to common earth dolly including modular boxes for housing the Modular type switches, sockets regulators etc with modular plates all as specified and directed for for 3 pin 15A socket multipurpose on independent board complete all as specified and directed. |
| 94 | Supply and fixing rectangular block for mounting switches, sockets fan regulator etc with 3mm thick plastic laminated sheet cover of size 200x150mm and 50mm deep all as specified and directed. |
| 95 | Supply & fixing Switch Socket outlet multipurpose 3 pin, 16 Amp and one pin 6 Amp controlled by one switch complete all as specified & directed |
| 96 | S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. |
| 97 | M & L for sub main wiring complete with two runs of 2.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC Cassing and capping in surface of wall, roofs etc with one run of PVC insulated copper conductor 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. |
| 98 | Supply and install commissioing of online UPS Input/output single phase capacity of 15000VA/13200 W at input voltage of 380/400/415 VAC input frequency range 40-70 Hz output voltage 220/230/240 VAC output frequency 50/60 Hz output voltage regulation +1% (battery mode) pure sine wave efficiency of upto 92% communication interface RS 232, USP, SNMP serial port for enhanced control operating temperature 0-40°C Humidity of 0-95 % RH (non condensing) noise level <55dB @1 mtr backup time of min 2 Hr with 65 Ah SMF VRLA batteries with easy monitor unit and power status LED display indicators customize UPS capabilities with smartslot mangaement cards with rack/tower convertible feature complete with Warranty of 1 year for UPS and 2 Year warranty for batteries incl all safety agency approved for safe operation.Make : APC/MICROTEK/LUMINOUS |
| 99 | Supply and fix MCB SPN DB made up with sheet metal enclosure, powder coated, neutral link, earth bar and din rail, 4 Way with 200 Amps rated bus bar, 240 Volts complete all as specified and as directed. |
| 100 | Supply and fix MCB DP 40 Amps all specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 days