|
| 1 | S.I.T.C of following manually operated Oil immersed Star-Delta motor Starter with double contact heavy duty and cable entry box, oil tank capacity 10 Ltr. to 12 Ltr. with filled oil complete with SS enclosure and operation handle complete etc. as reqd. i/c credit of old starter. |
| 2 | 60 HP |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Pro1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 5 | Hot finished welded type tubes |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required |
| 7 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | Providing, supplying, and fixing factory-made insulated PUF (Polyurethane Foam) Sandwich Panels consist of pre-painted galvanized iron (PPGI) sheet on both sides with injected high-density rigid polyurethane foam insulation in between, complete with tongue and groove interlocking arrangement, suitable fasteners, sealant, accessories, and supporting arrangements etc. as required at site. Outer/Inner PPGI sheet thickness: 0.45–0.50 mm,PUF insulation density: 40 ± 2 kg/m³, Panel thickness: 40/50/60 mm as per requirement, Fire-retardant grade insulation, Weatherproof and corrosion-resistant finish |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 10 | Fabrication, Supplying and installation of outdoor type cubical feeder pillar of size 1800mm x 1800mm x 600mm of M.S. sheet 2mm thick (14 SWG) duly compartmentalised having double door with two nos. godown locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 40 mm X 40 mm X 6 mm (NS) 900 mm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand :4 stone aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminum thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. Supplying & Fixing of following accessories in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. Incoming:- a) 630Amp. 36 KA MCCB, FP with neutral link- 1 No.b)Spreder Link for MCCB -1setc) Extended Rotary handle for MCCB - 1 Nos.d) 630 Amp onload changeovere) 800 Amp Aluminium Bus barMetering:- a) R. Y. B indication Lampb) ASS + VSS Selector Switchc) 6A SP MCB 10KA For Controllingd) CT 630/5A Class-1e) Digital single phase Ammeterf) Digital single phase Voltmeter....................Cont.................... |
| 11 | Outgoing:-a) 160 Amp. 10 KA MCCB, FP with neutral link -10 Nos.b) Spreder Link for MCCB -10 setc) Extended Rotary handle for MCCB - 10 Nos. |
| 12 | SITC of Onload 4 pole mannual changeover switch rating 630Amp, operated on 415 Volts ,50 Hz with sheet enclosure weather proof side handling operated & fixing by Angle iron, nut & bolts etc. complete as reqd. |
| 13 | Supply, laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 14 | 3 x 25 sq.mm |
| 15 | 3 x 50 sq.mm |
| 16 | 3 x 240 sq.mm |
| 17 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. |
| 18 | 3 x 25 sq.mm ( 25 mm ) |
| 19 | 3 X 50 sq. mm (35mm) |
| 20 | 31/2 X 240 sq. mm (62mm) |
| 21 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
| 22 | 150mm dia mm) |
| 23 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 24 | 150mm dia |
| 25 | Providing, laying, testing & commissioning of 'C'class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 26 | 150mm dia. |
| 27 | SITC of 1 HP self-priming pump complete with TEFC motor, starter, suction & delivery piping, foot valve, NRV, valves, cabling, earthing, base frame and all accessories required for priming of main pump system, including testing and commissioning complete.d. |
| 28 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 29 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 30 | Providing and fixing of 4.5Kg Carbon Dioxide type (Co2) fire extinguisher confirming to IS 15683 duly enamel painted fully charged, wheel release type valve, delivery hose horn locking arrangement, operating temperature: 30 Deg C to +55 Deg C i/c wall mounting MS. bracket etc. complete as required. |
| 31 | Supplying and fixing of anti-vibration pads mounts below motor pump base frame/foundation, made of high-grade neoprene rubber/cork-rubber composite vibration isolator, suitable load carrying capacity, including positioning, alignment, fastening with anchor bolts, levelling and all accessories required for proper vibration isolation of motor pump set, complete as per specifications and direction of Engineer-in-Charge. |
| 32 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 33 | Credit for old dismantle materials like Panel, MCCB, MS pipe, Valves, and starter etc. Please Enable Macros to View BoQ information |
