|
| 1 | Picking the existing damaged cement plaster surface |
| 2 | Floor finish & dadooing walls in cement mortar withMosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 3 | Brick / Stone Masonry in cement mortar walls under3m high |
| 4 | Plastering with cement mortar 1:5, 20mm ,thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete as per standard specifications S.I . 306 |
| 5 | Painting old wall surface with One coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour. |
| 6 | Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification |
| 7 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 8 | Roofing with Galvanized Corugated iron sheet of 0.80 mm Thickness 10m2 |
| 9 | Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 10 | Supplying and fixing of 18W 4 Feet LED Fitting with LED |
| 11 | Supplying and fixing ofWall Mounting Fan 300mm Sweep |
| 12 | AC Exhaust Fan 450mm (18”) Sweep (Heavy Duty) |
| 13 | Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3\\" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3\\" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8'0\\"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron \\"U\\" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty \\"C\\" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron \\"U\\" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty \\"C\\" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete. |
| 14 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered withCRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements,handles wind appliences etc., complete and as directed by the departemental officers. |
| 15 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors |
| 16 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (MSand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\"including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 17 | Supplying and filling in foundation and basement with Well Gravel inlayers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification |
| 18 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 19 | Painting one coat with White cement for Priming coat in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed.-100sq.m S.I.333 |
| 20 | Painting 2 coats with approved cement paint over cementplastered wall surface, ceiling and other new surface and includingcleaning, preparing the surface and curing etc., complete. |
| 21 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 22 | Construction of Inspection Chambers of following sizes with earth work for foundation with 25cm thick brick jelly cement concrete bed in C.M 1:4:10 using 40mm brick jelly for foundation brick work in C.M 1:6 for chambers, plastering with C.M 1:3 12mm thick benching, channelling, 75mm thick RCC loose slab covering in CM 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement etc complete 60x60x60cm |
| 23 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as perstandard specification |
| 24 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 25 | Refilling with excavated sand complying with standardspecification for filling in foundation and basement. |
| 26 | Supply of , PVC pipes and SpecialsPVC Taps |
| 27 | 110 mm PVC (6 KSC) |
| 28 | Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NBpipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Single Arrow Big Size 36\\" X 48\\" |
| 29 | Add GST 18% Please Enable Macros to View BoQ information |
