|
| 1 | Supply, Installation, Testing & Commissioning of NPS 4\\" Schedule-40 CPVC Pipe, as per the Clause No:1 of Tech Spec. |
| 2 | Supply, Installation, Testing & Commissioning of Schedule-80 CPVC Tee\\"s of Size 4''x4\\"x1\\" as per the Clause No:2 of Tech Spec. |
| 3 | Supply, Installation, Testing & Commissioning of 25NB Gun metal Gate valve along with insulation as per the Clause No:3. of Tech Spec |
| 4 | Supply, Installation, Testing & Commissioning of 20NB electrically operated isolation & control valves with actuator & insulation as per the Clause No.4 of tech spec. |
| 5 | Supply, Installation, Testing & Commissioning of PE-AL-PE Composite Pipe of NPS2025 with insulation as per the Clause No:5 of Tech Spec |
| 6 | Supply of connection set accessories (heavy duty brass accessories & other fittings) along with insulation. Formation of connection set by these fittings ,insulation, with valves, & composite pipe. Installation, testing , commissioning of connection set between chilled water header & FCUs as per clause No. 6 of Tech Spec. |
| 7 | Supply, Fabrication & Installation of 19mm (or more) thick plywood platform for protecting temporary CPVC header as per the caluse no 7of Tech Spec. |
| 8 | Safe removal of 19mm thick waterproof marine plywood platform & reinsatllation as per the clause no: 8 of tech spec. |
| 9 | Safe dismantling , removal of CPVC headers along with CPVC Tee’s & connection sets (supply and return connections to FCU’s which consists of Gun metal gate valve, electrically operated isolation & control valves, PE-AL-PE pipe, CPVC pipes (used as nipple) along with their fittings etc.) reinstallation and recommissioning of the same as per the clause no: 9 of tech spec. |
| 10 | Supply, Installation, Testing & Commissioning of following GI Pipe,Class-C complete with 50mm closed rubber cell insulation (2 layers of each 25 mm) and 24G aluminum Cladding as per the Clause No:10 of Tech Spec |
| 11 | Pipe Size 65 NB |
| 12 | Pipe Size 80 NB |
| 13 | Pipe Size 150 NB |
| 14 | Supply, Installation, Testing & Commissioning of GI nipples of size 25NB & 4\\" long with insulation for pressure gauge, Air release, drain and installation of connection set for FCU’s as per the Clause No:11 of Tech Spec |
| 15 | Supply, Installation, Testing & Commissioning of PIBCV of Size150NB with insulation as per the Clause No.12. of Tech Spec |
| 16 | Supply, Installation, Testing & Commissioning of 150 NB Cast Iron Gate Valves with Gun Metal Internals PN 1.6 & insulation, as per the Clause No:13 of Tech Spec |
| 17 | Supply, Fabrication & Installation of G.I / HDG Support for pipes as per caluse no 14 of Tech Spec. |
| 18 | Safe Removal of existing Chilled water Piping with insulation & other accessories , separating the plaster & insulation from the piping, valves & other accessories and shifting to the Dumping Yard as per caluse no 15 of Tech Spec. Note: Aprrox. length of piping 2300m & pipe sizes ranges from 50NB To 200NB |
| 19 | Fabrication, Installation, Testing & Commissioning of 150NB HDG Basket Filters with SS screen mesh & insulation as per the Clause No:16 of Tech Spec |
| 20 | Supply, Installation, Testing & Commissioning of Thermostat with temperature controller as per the Clause No:17 of Tech Spec |
| 21 | Supply, Installation, Testing & Commissioning of Bourdon Tube SS Pressure gauges with SS Ball Valves and Siphon tube and with pressure indication from 0-10 Kg/cm2 as per the Clause No:18 of Tech Specs |
| 22 | Supply, Installation, Testing & Commissioning of flanged type 25NB Globe valve with insulation as per Clause No:19 of Tech Spec |
| 23 | Supply, Installation, Testing & Commissioning of 2\\" Heavy duty rigid UPVC pipes with fittings,Tees & Fexible pipe for FCU drain after removing old as per Clause no 20. of tech spec. |
| 24 | Supply, fabrication, installation and painting of MS structural material such as I-beams, channels, angles, sections, chequred plates, gratings etc. required for supports, platforms, EPs etc. as per site requirement as per clause no. 21 of Tech. Spec |
| 25 | Safe handling & decomposition of existing insulation (Thermocole) materials by cyclohexane & taking out of same from BARC premises for safe disposal as per the clause no 22. of Tech Spec. |
| 26 | Installation ,Testing & Commissioning of following materials with insulation which are supplied by the department as per the clause no 23. of Tech Spec. |
| 27 | GI Pipe Size 65 NB Note: 50mm closed rubber cell insulation (2 layers of each 25 mm) and 24G aluminum Cladding shall be provided by bidder |
| 28 | 2\\" Heavy duty rigid UPVC pipes |
| 29 | GI nipples of size 25NB. Note: Insulation of the nipples shall be provided by bidder |
| 30 | Installation, Testing & commissioning of following materials which are supplied by the department with insulation for temporary headers system & removal of the same after completion of work as per the clause no.24 of Tech. Spec. |
| 31 | 150NB Cast iron Gate valve |
| 32 | 25NB Gun metal gate valve |
| 33 | 20NB Electrically operated isolation & control valve |
| 34 | PE-AL-PE composite pipe |
| 35 | Removal of Old deteriorated FRP blowers along with its associated ducting & accessories & taking it out from the BARC premises for safe disposal as per the clause no.25 of Tech. Spec. |
| 36 | Supply, installation, testing and commissioning of FRP blowers, along with, motor, vibration isolator mountings, connected FRP duct pieces and control panel as per the clause no.26 of Tech. Spec. |
| 37 | FRP centrifugal blower of capacity 3000 CFM and static of 65 mm of WC. |
| 38 | FRP centrifugal blower of capacity 6000 CFM and static of 65 mm of WC. |
| 39 | S.I.T.C of RCC / PCC. as per the clause no.27 of Tech. Spec. |
| 40 | S.I.T.C of 65NB Flanged type Gun metal gate valve as per the clause no. 28 of Tech. Spec. Please Enable Macros to View BoQ information |
