Name of Work:- Electrification work for Auditorium all A/C units at NIOT c us.
Sl. No.
Item Description
1
Supply and laying of 4C x 4sqmm XLPE insulated copper armoured 1.1kV graded UG cable along the wall/Cable duct. The job including of providing suitable Special 6\\" length MS wall step bracket with fastners along the wall in AHU room and Flat clamp with fastners for outside as required as site condition as per Electrical Engineer Instruction.Location: * Rajendra chola hall AHU - 108Mtrs.* Varuna hall AHU - 38Mtrs.* Panikkar hall (A) AHU - 124Mtrs..* Panikkar hall (B) AHU - 124Mtrs.* Manthan hall AHU - 132Mtrs.* Quasim hall AHU - 38Mtrs.Make: Polycab/RR kabel/KEI/SN cab/Gloster
2
Supply and Making of end termination with single compression metal gland (4C x 4sqmm) suitable crimping lugs.The gland should be double earthed by suitable copper wire and earth strip.Location:* Rajendra chola hall AHU - 24nos.* Varuna hall AHU - 12nos.* Panikkar hall (A) AHU - 24nos.* Panikkar hall (B) AHU - 24nos.* Manthan hall AHU - 18nos.* Quasim hall AHU - 12nos.Make: Comet / Comex
3
Supply,Making and fixing of Custom built 16SWG MS Powder coated Indoor wall mounting base plate type AHU Control box along the wall.* The job including of necessary Control wiring with 2nos of 63A SMC Connector in each one number of compartment and fixing of existing electrical components along the base plate.* The Air ventilation louver to be provided with Control box side wall and all bottom of the compartment.* Door Knob - Butterfly type lock* Should be ¾\\" size Punched Hole each 5 numbers on top of the all compartments. Note : Drawing Enclosed.A) L - 30\\" , H - 15\\" , D - 6\\" ( 2 Partition )Location : Varuna & Quasim Hall AHU
4
Supply,Making and fixing of Custom built 16SWG MS Powder coated Indoor wall mounting base plate type AHU Control box along the wall.* The job including of necessary Control wiring with 2nos of 63A SMC Connector in each one number of compartment and fixing of existing electrical components along the base plate.* The Air ventilation louver to be provided with Control box side wall and all bottom of the compartment.* Door Knob - Butterfly type lock* Should be ¾\\" size Punched Hole each 5 numbers on top of the all compartments. Note : Drawing Enclosed.B) L - 48\\" , H - 15\\" , D - 6\\" ( 3 Partition )Location : Manthan Hall AHU
5
Supply,Making and fixing of Custom built 16SWG MS Powder coated Indoor wall mounting base plate type AHU Control box along the wall.* The job including of necessary Control wiring with 2nos of 63A SMC Connector in each one number of compartment and fixing of existing electrical components along the base plate.* The Air ventilation louver to be provided with Control box side wall and all bottom of the compartment.* Door Knob - Butterfly type lock* Should be ¾\\" size Punched Hole each 5 numbers on top of the all compartments. Note : Drawing Enclosed.C) L - 67\\" , H - 15\\" , D - 6\\" ( 4 Partition )Location : * Panikkar AHU A&B - 2nos* Rajendrachola AHU - 1no.
6
Removing and Proper refixing of SS mesh ,Fibre Glass wool & Removing of Existing 6/10sqmm AYFY cable along the wall/Cable duct.Location: * Rajendra chola hall AHU - 10Mtrs.* Varuna hall AHU - 10Mtrs.* Panikkar hall (A) AHU - 10Mtrs..* Panikkar hall (B) AHU - 10Mtrs.* Manthan hall AHU - 6Mtrs.* Quasim hall AHU - 10Mtrs.
7
TOTAL WITHOUT GST
8
GST 18%
9
TOTAL Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
