|
| 1 | Schedule 'A' Part-I (Cable tray of existing wiring of singal):- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required.(150 mm width X 50 mm depth X 1.6 mm thickness). |
| 2 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" Tee\\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(150 mm width X 50 mm depth X 1.6 mm thickness). |
| 3 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" Cross member\\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(150 mm width X 50 mm depth X 1.6 mm thickness). |
| 4 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" bends\\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(150 mm width X 50 mm depth X 1.6 mm thickness). |
| 5 | Schedule ' A ' Part-II (Cable tray of existing wiring of UPS and Main supply):- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required.(300 mm width X 50 mm depth X 1.6 mm thickness). |
| 6 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" Tee\\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(300 mm width X 50 mm depth X 1.6 mm thickness). |
| 7 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" bends \\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(300 mm width X 50 mm depth X 1.6 mm thickness). |
| 8 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\" Cross member \\" (Galvanished thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.(300 mm width X 50 mm depth X 1.6 mm thickness). |
| 9 | Supplying, fabrication, testing and commisioning of feeder pillar of cubical outdoor type type with rain ravelling type of size 1000mm x 500mm x 950 mm construction, floor mounted type fabricated out of 2mm thick CRCA shee, compartmentalised with hinged lockable doors, dust and venium proof, powder coated of approved shade i/c electrical accessories bus bar suitable for TPN, alluminium lugs with lead complete for drop down cable and angle channel stand in cement concrete foundation, inter connection as per directed by Engr-in-charge. |
| 10 | Supplying and fixing of 200 amps. TPN, rising mains in metal enclosure with aluminium busbar including fixing clamp |
| 11 | Supply and fixing of following ways surface/ recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. 4 way (4+12), double door |
| 12 | Supplying and fixing following rating, four pole,415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (100 A) |
| 13 | Supplying and fixing 5A to 32A rating, 240/415V, 10 KA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required.Single pole. |
| 14 | Proving and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in exsisting cubical panel board including drilling holes in cubical panel, making connections, etc as required.200 A, 25 KA, TPMCCB |
| 15 | Supplying and wiring of 6.0 sqmm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 16 | Supplying, fixing and commensioning of Aluminium lugs for 6 sqmm |
| 17 | Supplying, fixing and commensioning of Aluminium lugs for 10 sqmm |
| 18 | Supplying, fixing and commensioning of Aluminium lugs for 16 sqmm |
| 19 | Supplying, fixing and commensioning of Aluminium lugs for 25 sqmm |
| 20 | Supplying, fixing and commensioning of Aluminium lugs for 35 sqmm |
| 21 | Supplying, fixing and commensioning of Aluminium lugs for 50 sqmm |
| 22 | Supplying, fixing and commensioning of Aluminium lugs for 70 sqmm |
| 23 | Supplying, fixing and commensioning of Aluminium lugs for 95 sqmm |
| 24 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Please Enable Macros to View BoQ information |
