|
| 1 | SUPPLY PART: SUPPLY OF STRUCTURAL ITEMS REQUIRED FOR REPAIRING OF FLUE GAS DUCT OF 110 TPH BOILER WITH FOLLOWING SPECIFICATIONS AND ATTACHED TENDER DOCUMENT: |
| 2 | MS Angle ISA 75x75x6, Length- 5 to 7 meters, IS-2062, E-250/Gr-A |
| 3 | MS Angle ISA 65x65x10, Length- 5 to 7 meters, IS-2062, E-250/Gr-A |
| 4 | MS Angle ISA 65x65x6, Length- 5 to 7 meters, IS-2062, E-250/Gr-A |
| 5 | MS Angle ISA 50x50x6, Length- 5 to 7 meters, IS-2062, E-250/Gr-A |
| 6 | MS Channel ISMC 100mmx50mmx5mm, Length- 5 to 7 meters, IS-2062, E-250/Gr-A |
| 7 | SS 304 Plate, Thickness -1.2 mm, 3 meter Length x 1.5 meter width |
| 8 | MS Plate, Thickness-6 mm, 6.3 meter Length x 1.5 meter width, IS-2062, E-250/Gr-A |
| 9 | MS Plate, Thickness-3 mm, 2.5 meter Length x 1.25 meter width, IS-2062, E-250/Gr-A |
| 10 | SERVICE PART: DISMANTLING, FABRICATION, ERECTION AND COMMISSIONING AS PER BELOW DESCRIPTION: |
| 11 | 1. Dismantling, Fabrication, Erection and Commissioning of damaged Flue gas duct:a. Duct from Boiler outlet to economizer inlet.b. Duct from economizer outlet to Air Pre Heater inlet.c. ESP inlet cone (from expansion bellow) – including repairing/replacement of outlet expansion bellow ESP inlet side.d. ESP outlet cone (up to complete T) – including repairing/replacement of outlet expansion bellow ESP outlet side.e. ID fan inlet duct (up to 3 meters from ID fan inlet)f. ID fan casing bottom side (both ID fan)2. Dismantling, Fabrication, Erection and Commissioning of damaged hoppers: a. Economizer Hopper complete (Qty-03 Nos)b. Air Pre heater hopper partially (Qty-04 Nos)3. Repairing/Replacement of damaged plate:a. Un-burnt hopper (Bank Zone hoppers, Qty-06 Nos.)b. ESP hopper both fields4. Dismantling of damaged plates and Fabrication, Erection:a. Boiler roofb. Steam drum to mud drum both side casingc. Bagasse Chute (from SC#02 head side to BC#03 Tail side)d. SC#02 bottom plate (Partially) |
| 12 | DISMANTLING, FABRICATION AND ERECTION OF EXPANSION BELLOW AS PER BELOW DESCRIPTION: |
| 13 | Expansion bellow at Economizer (Qty-01 Nos., Double loop), Size- 2.6 m x 1.3 m, Material- SS304 |
| 14 | Expansion bellow at ID fan inlet (Qty-02 Nos., Single loop), Size-8 m x 3.3 m, Material-SS304 Please Enable Macros to View BoQ information |
