|
| 1 | Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge all complete. |
| 2 | Supplying all materials, labour and T & P etc. and Dismantling (Cutting) cement concrete road Pavement by mechanical means using pneumatic tools breaking/Cutter to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separatelyas for taking the pipeline through as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. by mechanical means |
| 3 | Supplying all materials, labour, tools & plants for cutting of mettaled road for laying of pipeline including disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 4 | Supplying all materials, labour, tools & plants for Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 5 | Supplying & Laying in trenches Centrifugally cast (SPUN) DUCTILE IRON Pressure Socket & spigot pipe of Class - K7 or K9 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be measured separately)(Including cost of pipe) |
| 6 | 150 mm K-7 Pipe line |
| 7 | 200 mm K-7 Pipe line |
| 8 | Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.( Excluding cost of rubber ring ) |
| 9 | 150 MM |
| 10 | 200 mm |
| 11 | Supplying all materials, labour and T&P for Supply, Installation & Testing of Ductile Iron Resilient Seated Glandless Sluice Valve of RATING PN - 1.6 (IS 14846) with double flanged ends for water works purpose of the following rating and nominal diameters, all complete as per specification and direction of Engineer-in-Charge,(including cost of Nut bolt & Washer,Rubber Insertion sheet, etc.)(Make -VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) |
| 12 | 100 mm dia. Glandless Sluice Valve, Rating P.N – 1-60 ( I.S : IS:14846/2000) |
| 13 | 150 mm dia. Glandless Sluice Valve, Rating P.N – 1-60 ( I.S : IS:14846/2000) |
| 14 | 200 mm dia. Glandless Sluice Valve, Rating P.N – 1-60 ( I.S : IS:14846/2000) |
| 15 | Laying in trenches D.I & specials conforming to conforming to relevant IS specification of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials) |
| 16 | Cutting of C.I /DI pipe by eletric arc welding, at site including cost of materials,labour,T & P etc all complete |
| 17 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 18 | MS Pipe |
| 19 | 200mm dia M.S.Pipe (7.00mm thick) |
| 20 | 150mm dia M.S.Pipe (6.30mm thick) |
| 21 | 100mm dia M.S.Pipe (5.40mm thick) |
| 22 | 200mm dia M.S 12mm thick Flange |
| 23 | 150mm dia M.S 12mm thick Flange |
| 24 | 100mm dia M.S 12mm thick Flange |
| 25 | 200mm dia x 45° M.S. Bend for pass over |
| 26 | 150mm dia x 45° M.S. Bend for pass over |
| 27 | 100mm dia x 45° M.S. Bend for pass over |
| 28 | 200 mm dia 900 bend |
| 29 | 150 mm dia 900 bend |
| 30 | 100 mm dia 900 bend |
| 31 | Supplying all labour and T&P for Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for all complete as per specification and direction of Engineer-in-Charge. |
| 32 | Supplying all labour and T&P for Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld/Butt weld) to MS pipes and fittings at site. |
| 33 | Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge. |
| 34 | 200mm dia MJ Socketed Tail Piece - |
| 35 | 150mm dia MJ Socketed Tail Piece - |
| 36 | 100mm dia MJ Socketed Tail Piece - |
| 37 | Supplying all materials Labour & T & P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve . |
| 38 | 25 mm dia Tamper proof Air Valve (Make -VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) |
| 39 | Supplying all materials , Labour & T & P for Repair of House connection ferrule point including concrete cutting ,earth work excavation,dewatering , drilling water main, providing Saddle with ferrule ,MDPE Pipe with compresion fittings & replacement of service pipe of 20mm /25mm up to 0.30 mtr with fixing of a Brass MTA/ FTA / uPVC Socket etc. complete to make the connection leak proof . |
| 40 | Supplying all materials, Labour & T & P for providing New House connections to beneificiares from PHE Deptt./WATCO CI/DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completition of the work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radious by mechanical transport , fixing 1/8\\" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line , cutting holes in brick/ stone / RCC masonary work , repair the broken holes , cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings, 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of E.I.C |
| 41 | With 150mm dia distribution main |
| 42 | With 200mm dia distribution main |
| 43 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 44 | 100mm dia - |
| 45 | 150mm dia - |
| 46 | 200mm dia - |
| 47 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the E.I.C. |
| 48 | Supplying all materials, labour, T&P for providing Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 49 | Supplying all materials, labour, T&P for providing cement concrete(1:2:4) with 12mm size crusher broken hard granite chips including all cost of conveyance, royalty, sundries, watering for curing, supervision charge, contractor profit & labour cess etc. all complete as per the direction of Engineer-in-charge. |
| 50 | 200 mm DI pipe |
| 51 | 150 mm DI pipe |
| 52 | Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. |
| 53 | [0.90mx0.90mx1.00 m] for 150mm. to 100mm. dia. S/V. |
| 54 | [1.00mx1.00mx1.20 m] for 200mm. dia. S/V. |
| 55 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 56 | Supplying all labour and t&p for shifting of excavated materials from site within 5 KM distance including loading,unloading, transportation to site all complete as per direction of E I C . Please Enable Macros to View BoQ information |
