|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : REPAIRS AND DAY TO DAY MAINTENANCE TO PLUMBING, SANITRARY FITTINGS, JOINERY AND ALLIED WORKS AT NCSR, CEDU, CMDC, CCOSW, HQ 1 EW BDE, 135 EW EME BN, 9 R&O, HELIPAD COLONY, NSOI, SPORTS COMPLEX, BIKRAM PARK, TARAMOUNT & AOR OF AGE B/R-II, GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-49/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1 Sqm but not exc 3 Sqm each and removing from site, complete all as specified and as directed. |
| 5 | Demolition of cement concrete, unreinforced, in ground floors and paving's not exceeding 15cm thickness below or above ground level, complete all as specified and as directed. |
| 6 | Taking down cement plaster of any description on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and directed. |
| 7 | Taking down aluminium/uPVC/Toughened glass door/window shutters from frame, repairs to shutter and frame and making good and serviceable and refixing to existing frame including greasing/oiling and repair/replacement of accessories like rubber kit, beading, handle, hinges, screws and similar items etc as all carpenter works complete all as specified. |
| 8 | S&F 35mm thick Flush shutters, solid core construction, with BWR(boiling waterproof grade) plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. Make : Century/Green ply/Kit ply/Archid Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim. (ii) all edges shall be sealed with hardwood lipping or PU sealer with polish. |
| 9 | S&F 1mm thick wood grain printed Sunmica/PVC sheet (Design as approved by Engr in Charge) fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and as directed. |
| 10 | S & F 30mm thick IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified. |
| 11 | M&L for aluminium alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 m thick, top rail and both styles of size 100mm x 44 mm x 2mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick incl. aluminium anodized snap beading and rubber packing,& 5. mm thick colour designer glass incl. , 200 mm long tower bolt-2 Nos, 200 mm long Alm handle- 02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock & double action floor door spring heavy duty suitable for shutter for each leaf complete all as specified and directed |
| 12 | Powder coated (50 micron of approved colour) Aluminium anodised double shutter window (glazed and wire gauge) side hung with aluminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including aluminium grill and all fittings such as rubber gasket aluminium glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including aluminium tower bolt 75mm 02 Nos in each shutter, aluminium hinges 100mm B-12) 02 Nos in each shutter, aluminium handle 100 mm 01 No in each shutter including all accessories complete all as specified and as directed. |
| 13 | S&F Almirah/kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arrangement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equivalent) complete all as specified and as directed. |
| 14 | Solid PVC moulded door frame of size 50mmx47mm made out of 5mm plain wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube and fixing in opening, complete all as specified and as directed. |
| 15 | Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified. |
| 16 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 17 | S&F 5.5mm glass as in windows, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed. |
| 18 | S&F of venetian blinds of approved make, vertical or horizontal type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. |
| 19 | S&F 100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed. |
| 20 | S&F Stainless steel handles cast type anodized 150mm size, complete all as specified and as directed. |
| 21 | S&F 250mm size stainless steel sliding door bolt with hasp, stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed. |
| 22 | S&F stainless steel 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed. |
| 23 | Floor door stopper of 140mm size of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repair complete all as specified and as directed |
| 24 | Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and as directed. |
| 25 | Galvanised steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, and fixed with tinned tacks or galvanised mild steel staples, fixed in repairs, complete all as specified and as directed. |
| 26 | S&F in repairs for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders, water tank staging, Railing framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and directed. |
| 27 | S&F continuous (Piano) hinges, stainless steel, bright finished or electrogalvanized width of flaps in 30mm complete all as specified. |
| 28 | S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed. |
| 29 | S&F in repair stain less steel door catcher of superior quality all as specified and directed by Engr in charge |
| 30 | S&F for brass mortice lock of 4 levers 100 mm thick fixed in aluminium door complete all as specified and directed. |
| 31 | Drawer side channel of std size and including of roller for moving drawer, mild steel bright finish, or electro galvanised width of flap 30 mm & Length 60 mm in repair complete all as specified and directed. |
| 32 | Stainless steel multi-purpose basket in wooden drawer/partitions for storing rations of various types made of 4 mm dia stainless steel rods, fixed in side partitions etc fixed in repair complete all as specified and directed for modular kitchen. |
| 33 | Stainless steel luddle-craddle hanging stand for cutlery in repair complete all as specified and directed by Engr-in-Charge for modular kitchen. |
| 34 | M&L for 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, including Dismantling existing wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 36 | M&L for 0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed. |
| 37 | S&F for 0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed. |
| 38 | S&F solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 39 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in- Charge. |
| 40 | M & L for 50 mm thick cement concrete 1:4:8 type D-2 (40mm grade aggregate) as in sub base complete all as specified and as directed. |
| 41 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpaths, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 42 | M&L for 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 43 | M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified and directed. |
| 44 | S&F Vitrified Dura stone tiles of size n exc 0.36Sqm of 10mm thick as in floors and over jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed |
| 45 | M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 46 | M&L for Light shade double charged vitrified tile 8-10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. |
| 47 | M&L for Light shade double charged vitrified tile 8-10 mm thick (Square / rectangular) polished , area of each tiles exc 0.42 Sqm but not exc 1.00 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. |
| 48 | S&F Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match complete all as specified and as directed. |
| 49 | M&L for rendering 10mm thick as backing coat in CM 1:4 complete all as specified and as directed |
| 50 | S&F for light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished, as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. |
| 51 | S&F for glazed ceramic coloured tiles 300mm x 600mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 52 | Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and as directed. |
| 53 | Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed. |
| 54 | Preparing newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed. |
| 55 | Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 56 | Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multi-storeyed bldgs., complete all as specified and as directed. |
| 57 | Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed. |
| 58 | Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and directed. |
| 59 | M & L for applying two coats of synthetic enamel ordinary tint paint including red oxide primer and preparation extra complete on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified. |
| 60 | Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and directed. |
| 61 | Applying two coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) over a coat of exterior weatherproof wall care putty up to G+2 floor height including preparation of surfaces etc complete all as specified and directed. |
| 62 | Preparation of old decorated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and directed. |
| 63 | Preparation of old painted wooden/Steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 64 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. |
| 65 | M&l for sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 66 | Taking down bib taps/pillar taps/mixers/shower/water tanks etc and making good and serviceable and refixing to same including minor repairs and repair/replacement of accessories like spindle, rubber kit, screws and similar items to make serviceable and all plumbing works etc complete all as specified. |
| 67 | S&F in repairs looking mirror 5 mm thick with bevelled edge with and incl four SS spacers of selected quality size as reqd at site complete all as specified and as directed. |
| 68 | Taking down of old tank exc 250 ltr but n exc 500 ltrs and removing from site complete all as specified. |
| 69 | S&F rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position and tank nipple complete all as specified and as directed. |
| 70 | Taking down of old tank exc 500 ltr but n exc 1000 ltrs and removing from site complete all as specified. |
| 71 | S&F rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position and tank nipple, complete all as specified and as directed. |
| 72 | Taking down of old GI tubing 15mm dia complete all as specified and as directed. |
| 73 | S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and as directed. |
| 74 | Taking down of GI tubing 20mm dia complete all as specified and as directed. |
| 75 | S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and as directed. |
| 76 | S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete complete all as specified. |
| 77 | S&F in repairs 10 ltrs capacity PVC low level flushing cistern white inlet float valve, handle complete including brackets complete all as specified. |
| 78 | S&F in repair 15mm bore dia of pipe in Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 79 | Angle valve of brass fancy type, chromium plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed. |
| 80 | Ball valves PTMT of size 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixing in repair complete all as specified and directed(Minimum weight not less than 210 gms ). |
| 81 | Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm fixing in repair, complete all as specified. |
| 82 | S&F in repair waste pipe of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm, suitable for sink & WHB, in repair complete all as specified and as directed by Engr-in-Charge. |
| 83 | S&F in repair CP 20mm dia, Stainless steel, tubular curtain rail, fixed with fancy brackets and end bulbs complete all as specified and as directed by Engr-in-Charge. |
| 84 | S&F in repair water closet single piece pattern coloured of size 535 x 380 x 400 mm in repair as approved and complete all as specified and directed by Engr-in-Charge . Make : CERA Cat Part No (S1041109 P trap), Seat cover B1510108 Clair seat cover. |
| 85 | S&F in repair WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and directed by Engr-in-Charge. Make :CERA Cat Part No (S2040115 & S2090111). |
| 86 | 15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed. Make: Jaquar, Cat Part No CON 167KNB and equivalent in CERA. |
| 87 | 15 mm bore wall mixer fixed/Sink mixer in repair complete all as specified and directed. Make: Jaquar and equivalent in CERA. |
| 88 | 125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed. |
| 89 | 15 mm bore long body Bib tap in repair complete all as specified and directed. Make : Jaquar Cat Part No CON-037KN and equivalent in CERA. |
| 90 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent . |
| 91 | Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 92 | 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 93 | Soap dish in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
