|
| 1 | S & F in repair 18mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including dismantling of existing board any type or specification complete all as specified and directed. |
| 2 | All as per ser Item No 1 above but one side prelaminated type complete all as specified and directed. |
| 3 | All as per ser Item No 1 above but 12mm thick both side plain type complete all as specified and directed. |
| 4 | S & F continuous (Piono) hinges ,stainless steel bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 5 | S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 6 | S&F stainless steel handles of 100 mm size for Cup board complete all as specified and directed. |
| 7 | S&F stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) complete all as specified and directed. |
| 8 | Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm including iron mongery each complete all as specified and directed. |
| 9 | Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed. |
| 10 | Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each,complete all as specified and directed. |
| 11 | Refixing of shutters of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, including taking down shutter from chowkat or frame complete all as specified and directed. |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile ditnensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg./ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile ditnensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 15 | S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS complete all as specified and directed. |
| 16 | S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 17 | M & L for providing cement concrete type C-0, 1:3:6 (12.5 mm graded stone aggregate as in filling of pressed steel door frames to fix holdf ast complete all as specified and direcetd. |
| 18 | S&F, 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and complete all as specified and directed. |
| 19 | S & F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 20 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gnts) having minimum density of 650 kg/ cum and screw withdrawal strength of:soo N(Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2 modulus of elasticity 850 N/ mm2 ad resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.Sscrews,all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.Sscrews shall be paid separately) |
| 21 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID PC DOOR SHUTTER consisting of Density 500 Kg/Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XT aluminium Mesh for additiona strength and satety purpose confirming as per IS:4020). The door should be water proof, termite proot, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm long 25mm width and 2mm thick and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. The wire gauge shall be stretched to tighten firmly complete all as specified & as directed. |
| 22 | S&F Butt hinges, medium weight Stainless steel 100 mm size complete all as specified and as directed. |
| 23 | S&F Stainless steel handles 150 mm long fancy type (Min weight of 150gm) complete all as specified and directed. |
| 24 | S&F Stainless steel tower bolts 150mm long (Min weight of 150gm) complete all as specified and directed. |
| 25 | Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm complete all as specified and directed. |
| 26 | Supply and fix mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 27 | M&L Two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 28 | M&L Two coats of synthetic enamel paint over a coat of redoxide primer including preparation of surfaces on new steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 29 | S&F Stainless steel sliding door bolt 300mm long with hasp staple (bolt type) and fixing complete all as specified and as directed. |
| 30 | S & F in repairs PVC T-Base for Water Tank of Capacity 500Ltr (Dimensions : 870mm dia, Leg Height - 80mm, Leg Width 60mm and Height - 130mm) complete all as specified and directed. Make : Vectus or Equivalent |
| 31 | S&F in repairs Chromium Plated Knob (Square/Circular Thread) for Concealed Stop Cock/Bib Tap/Hot&Cold Mixer etc complete all as specififed and as directed |
| 32 | S&F in repairs stainless steel handles of 150 mm size for Cup board complete all as specified. |
| 33 | S&F in reapirs stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement) complete all as specified and directed. |
| 34 | S&F in repairs foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm all as specified and as directed. |
| 35 | S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and as directed. |
| 36 | S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed. |
| 37 | S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long complete all as specified and directed. |
| 38 | Hacking out old broken glass panes 3 mm thick from steel/Aluminium frame including putty/ metal beadings and supply and fix sheet glass ordinary 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary arrangement new oil putty or with existing metal beadings (up to third floor) complete all as specified and as directed. |
| 39 | Hacking out old broken glass panes 3 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 3 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden/metal beads complete all as specified and as directed. |
| 40 | M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame (up to third floor) complete all as specified and directed. |
| 41 | S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window, completed all as specified and directed. |
| 42 | Supply and fix in repairs Stainless steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 43 | M&L for angle such as hold fast and similar items etc complete all as specified and as directed. |
| 44 | S & F in repair soft closing hinges 0 Degree high grade mild steel, bright finish or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed. Make :- ultrafresh/Kitchen gold or equivalent |
| 45 | S&F in repair of rubber beading 40mm strip in bottom of door complete all as specified and directed. |
| 46 | S&F in repair Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as specified and directed. |
| 47 | S&F in repair Harrison rails (Heavy duty) mild steel chromium plated (Curtain Hanging Rods) 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed. |
| 48 | Taking down chowkhats or frames n exc 1.5 Sqm each complete all as specified and directed. |
| 49 | M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/Wiremesh, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 50 | M&L Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 51 | M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and all as specified and directed. |
| 52 | M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings for aluminium frame in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 53 | M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified and directed. |
| 55 | M&L Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane 3mm thick complete all as specified and directed. |
| 56 | M&L Sheet glass,ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick complete all as specified and directed. |
| 57 | S & F in repair one piece EWC with UF soft close seat cover and twin flush fitting of size 710mm long 395mm width and 730mm thick snow white with 'P' OR 'S' trap incl duroplast soft close seat cover CAT PART NO-;VGS-WHT-81853P180UF of jaquar or CERA Cat Part no-S101322mb or KOHLER Cat part no-3983-IN-S-0 Of approved make complete all as specified and diected. |
| 58 | S&F in repairs 5mm thick designed glass for window of any size (design shall be approved by GE) including hacking out old glass complete all as specified and directed. |
| 59 | S&F in repairs Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge.complete all as specified and directed. Please Enable Macros to View BoQ information |
