Tender For Special Repair To Bldg No T-64 (Bathing Block), T-65, T-67, T-68 At 281 And T-32 At 205 At Tezu Under Ge (P) Lohitpur
Tender Value
25 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
1 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-64 (Bathing Block), T-65, T-67, T-68 At 281 And T-32 At 205 At Tezu Under Ge (P) Lohitpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jun-2026 | Revised BOQ | BOQ | 25-Jun-2026 |
| 2 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 2 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 3 | Dismantling structural steel work including doors, gates and Window but excluding framed truss etc.complete all as specified and directed |
| 4 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 5 | M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed. |
| 6 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and as directed. |
| 7 | Material and labour for preparation of newly platsered wall and apply two coats of of Oil bound distember over a coat of 1 mm layer wall care putty over a coat of primer complete all as specified and as directed. |
| 8 | Material and labour Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing (Grade A )Compound complete all as specified and directed. |
| 9 | Material and labour for reinforced cement concrete (nominal mix) 1:2:4 Type B1( 20 mm graded stone Aggregate ) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | Material and labour for 100mm thick PCC 1:4:8 type D2 (40mm graded stone aggregate) as sub base of floor path etc. complete all specified and directed. |
| 11 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 12 | Material and labour for reinforced cement concrete (nominal mix) 1:2:4 Type B1( 20 mm graded stone Aggregate ) in beams,cantilevers,bressummers, lintel over 1.50m clear span complete all as specified and directed. |
| 13 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc..complete all as specified and directed. |
| 14 | Material and laabour for Mild steel barsTMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending,mspirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | Ditto, TMT Bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 16 | M&L for Non - skid Ceramic tiles 7 to8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match the existing surface including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 17 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface ovar 10 mm thick backing coat in cement mortar 1:6 complete all as specified and as directed. |
| 18 | Material and labour for 75 mm thick plain cement concrete 1:3:6 type C- 2 (40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 19 | M &L for Non asbestos fibrecement buildingboards 6 mm thick of size 600mm x 600mm fixed orlaid/ inserted to timber/ GI/Aluminium frameworkwith screwcomplete all as specified and directed. |
| 20 | Supply and fixed Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm for celling incliding Gl frame work for seamless ceiling of G l perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners wit mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermidiate channel at 457 mm centre to centre complete all as specified and directed. |
| 21 | Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, |
| 22 | Supply and fixing Pressed Steel Windows/Ventilator using box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete complete all as specified and directed. |
| 23 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed. |
| 24 | Supply and fix, 40 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed |
| 25 | Supply and fixed Butt hinges, medium weight, cold rolled mildsteel 100 mm, and fixed complete all as specified and directed. |
| 26 | Supply and fixed 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 27 | Supply and fixed 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 28 | Supply and fixed 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares. |
| 29 | Material and labour for 15 mm thick rendering (Internal Plastering) in cement mortar 1:4 on fair faces of brickwork or concrete surface finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed. |
| 31 | Supply and fixed Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 32 | Supply and fixed Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 33 | Refixing except sheeting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 34 | M&L hardcore of broken stone or bolder of gauge n exc 63mm, deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified complete all as specified and directed. |
| 35 | M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built in in cement mortar 1:4 complete all as specified and as directed. |
| 36 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and smooth without ussing extra cement complete all as specified and as directed. |
| 37 | Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. |
| 38 | Material and labour for 25 mm thick cement concrete 1:2:4 typeB-1 (using 20 mm nominal size graded crushed stone aggregate) as in floor finished even and fair complete all as specified and directed. |
| 39 | Material and labour for glazed ceramic wall tiles fixed in vertical surface of size 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match existing surface including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 40 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enameled paint over a coat of red oxide all as specified and directed. |
| 41 | Taking down Chowkhats or frames exc. 1.5 sq. m and n exc. 4 sqm each but with shuter all as specified and directed. |
| 42 | Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 43 | Material and labour for factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing |
| 44 | Supply and fixed stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 45 | Supply and fixed extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 75 complete all as specified and directed. |
| 46 | Supply and fixed in repair 25mm Gun-metal globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed |
| 47 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads shoes bends swan-necks, etc including cleaning or rifixing or removal to store (measured overall as fixed along the centre line over fitting and accessories complete all as specified and directed. |
| 48 | Supply and fixed in repair 20mm Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 49 | Supply and fixed PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 50 | Supply and fixed 75 mm dia PVC (SWR) pipes single socketed, with rubber ring joints fixed to walls complete all as specified and as directed. |
| 51 | Supply and fixed grating doom 100 mm dia of PTMT (Minimum weight 25gms) fixed complete all as specified and as directed. |
| 52 | S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S & F 10 litres cap PVC, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as sspecified and as directed. |
| 54 | Supply and fixed PVC connections 15 mm size with PTMT nuts of length 450mm fixed complete all as specified and directed. |
| 55 | Supply and fixed in repair 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated |
| 56 | Dismantling water tanks capacity exceeding 500 litres but not exceeding 1000 Litres and removing to store complete all as specified and as directed. |
| 57 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 58 | Supply and fixed in repair Tubular towel rail, 20mmdia, D type, 60cm long between flanges,Aluminium anodised complete all as specified and as directed. |
| 59 | Tacking up or downof 15mm and 20mm bore of pipe steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed |
| 60 | Supplying and laying of 16 mm Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 61 | Supplying and laying of 20mm Dia Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 62 | Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 63 | Supply and fixed in repair bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed |
| 64 | Supply in repair and fixing overhead shower rose brass chromium plate size 125mm dia complete all as specified and as directed. |
| 65 | Supply and fixed PVC (SWR) floor trap 75mm, plain with grating includ ing jointing with solvent cement complete all as specified and as directed. |
| 66 | Supply and fixed 75mm PVC (SWR) branch piece double (double y) equal unequal complete all as specified and directed |
| 67 | Supply and fixed 110mm PVC (SWR) branch piece single (single y) equal unequal complete all as specified and directed |
| 68 | Supply and fixed 75mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 69 | Supply and fixed 110mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 70 | Supply and fixed 110mm PVC (SWR) vent cowl specified and directed |
| 71 | Supply and fixed 75mm PVC (SWR) vent cowl specified and directed |
| 72 | Supply and fixed 75mm PVC (SWR) bends any radius specified and directed |
| 73 | M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 74 | Supply and fixed mild steel small articles as holdfasts etc complete all as specified and directed. |
| 75 | M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLHS in and in PVC conduit/ casing & caping of suitable size duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light/ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 76 | S/F sunken flush PVC boxes for fixing of modular switches/sockets flush to the walls complete for 6 modules complete all as specified and directed. |
| 77 | S/F ceiling rose, 3 ph plastic round PVC/polycarbonate isolated body for mounting ceiling fan/exhaust fan/light fittings complete all as specified and directed. |
| 78 | S/F modular cover plate with frame for fixing of modular switches/sockets for 3 modules complete all as specified and directed. |
| 79 | S/F switch piano modular flush type 5/6 Amps 230V AC complete one way complete all as specified and directed. |
| 80 | S & F surface and wall mounted LED batten 4feets with 1x20W indoor decorative luminaries with and including electronic driver and 1x20W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings complete all as specified and directed. |
| 81 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor all as specified and directed. |
| 82 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd |
| 83 | S&F sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 84 | S&F MCB 6 to 32 amps single pole amp rating 240V, 10KA breaking capacity 'C' Curve complete all as specified. |
| 85 | S&F MCB DP 32 amps 240 volts 10KA breaking capacity 'C' Curve complete all as specified. |
| 86 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 10 sqmm 2 core all as specified and directed. |
| 87 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply and laying DWC 50mm pipe SN8 laid in trenches for protection of cable all as specified and directed by the Engr-in-Charge. |
| 89 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and directed by the Engr-in-Charge |
| 90 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 91 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials all as specified and directed by engineer in charge. |
| 92 | M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLHS in and in PVC casing & caping of suitable size duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light/ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 93 | All as per item No. above here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engr-in-charge. |
| 94 | S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep. (3 Module) complete all as specified and directed. |
| 95 | Supply and fixed switch piano modular flush type 15/16 Amps 230V AC complete one way complete all as specified and directed. |
| 96 | S&F modular socket outlet 3 pin 16 Amps and flush type complete all as specified and directed. |
| 97 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 98 | S & F surface and wall mounted LED batten 2 feets with 1x10W indoor decorative luminaries with and including electronic driver and 1x10W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings complete all as specified and directed. |
| 99 | S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 days