|
| 1 | Taking down old unserviceable point wiring (light/fan/socket/power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators etc and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified and directed. |
| 2 | Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified and directed. |
| 3 | M&L for point wiring for one light point controlled by one, one-way switch of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in and including PVC casing caping 25mm wide/PVC Surface conduits of appropriate size as per specification as requirerd at site and as directed of heavy duty ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed.Note:- Making good of disturbed surfaces will be done by contractor without any extra claims. |
| 4 | All as per srl item no 03 above but one Fan point controlled by one, one-way switch and regulator complete all as specified and directed. |
| 5 | All as per srl item no 03 above but one 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 6 | All as per srl item no 03 above but one 3 pin 5 Amps socket outlet point on same board complete all as specified and directed. |
| 7 | All as per srl item no 03 above but one bell/buzer point controlled by one bell push complete all as specified and directed. |
| 8 | All as per srl item no 03 above but Two light point controlled by one switch complete all as specified and directed. |
| 9 | All as per srl item no 03 above but one light point controlled by two two way switches complete all as specified and directed. |
| 10 | All as per srl item no 03 above but with 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly for one 15 Amps socket outlet point on independent board complete all as specified and directed. |
| 11 | M&L for point wiring for one light point controlled by one, one-way switchof any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, in and including PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed.Note- (i) Cutting in chases and pointing in will be done by contractor without any extra cost to department. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost to deparment. |
| 12 | All as per srl item no 11 above but one Fan point controlled by one, one-way switch and regulator complete all as specified and directed. |
| 13 | All as per srl item no 11 above but one 5 pin 5 Amp Socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 14 | All as per srl item no 11 above but one 5 pin 5 Amp Socket outlet point controlled by one switches on independent board complete all as specified and directed. |
| 15 | All as per srl item no 11 above but one bell/buzer point controlled by one bell push complete all as specified and directed. |
| 16 | All as per srl item no 11 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly for one 15 amps socket outlet point on independent board complete all as specified and directed.Note:- Making good of disturbed surfaces will be done by contractor without any extra cost. |
| 17 | S&F modular switch 6A SP one - way 230V 1 module white/ivory finish complete all as specified and directed. |
| 18 | S&F modular switch 6A SP Two - way 230V 1 module white/ivory finish complete all as specified and directed. |
| 19 | S&F modular switch 16A SP one - way 230V white/ivory 1 module ivory finish complete all as specified and directed. |
| 20 | S&F modular socket outlet 2/3 pin 6 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 21 | S&F modular socket outlet 2/3 pin 16 Amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified and directed. |
| 22 | S&F for Bell push, flush type, 5 Amp 1 module complete all as specified and directed. |
| 23 | S&F bell electrical ding dong including hard PVC board ISI marked complete all as specified and directed. |
| 24 | S&F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amp single pole MCB complete all as specified and directed. |
| 25 | S&F ceiling rose surface type three terminals complete all as specified and directed. |
| 26 | S&F Modular type stepped electronic fan regulator 2 module complete all as specified & directed. |
| 27 | Supply and fixing in repair White cover plate with frame, 2 module complete all as specified and directed. |
| 28 | Supply and fixing in repair White cover plate with frame, 3 module complete all as specified and directed. |
| 29 | Supply and fixing in repair White cover plate with frame, 4 module complete all as specified and directed. |
| 30 | Supply and fixing in repair White cover plate with frame, 6 module complete all as specified and directed. |
| 31 | Supply and fixing in repair White cover plate with frame, 8 module horizontal complete all as specified and directed. |
| 32 | Supply and fixing in repair White cover plate with frame, 12 module complete all as specified and directed. |
| 33 | Supply and fixing in repairs White PVC Box of 2 module complete all as specified and directed. |
| 34 | Supply and fixing in repairs White PVC Box of 3 module complete all as specified and directed. |
| 35 | Supply and fixing in repairs White PVC Box of 4 module complete all as specified and directed. |
| 36 | Supply and fixing in repairs White PVC Box of 6 module complete all as specified and directed. |
| 37 | Supply and fixing in repairs White PVC Box of 8 module complete all as specified and directed. |
| 38 | Supply and fixing in repairs White PVC Box of 12 module complete all as specified and directed. |
| 39 | Supply and fix 3 core copper 1.5 sqmm twisted wire complete all as specified and directed. |
| 40 | M&L for Sub main wiring with two single core 1.5 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor FRLS-H cable with one run of continuous copper earth conductor of 2.5 sqmm and including PVC casing caping of suitable size not less than 25mm dia including taking down old submain wiring complete all as specified and directed. Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra cost to department. (ii) 3 runs of 1.5 Sqmm conductor and one run of PVCcasing caping min 25mm dia shall be measured as one unit RM length. |
| 41 | M&L for Sub main wiring with two single core 2.5 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor FRLS-H cable with one run of continuous copper earth conductor of 2.5 sqmm and including PVC casing caping of suitable size not less than 25mm dia including taking down old submain wiring complete all as specified and directed. Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra cost to department. (ii) 3 runs of 2.5 Sqmm conductor and one run of PVCcasing caping min 25mm dia shall be measured as one unit RM length. |
| 42 | M&L for Sub main wiring with two single core 4 sqmm, 1100 volts grade, PVC insulated, stranded copper conductor FRLS-H cable with one run of continuous copper earth conductor of 4 sqmm and including PVC casing caping of suitable size not less than 25mm dia including taking down old submain wiring complete all as specified and directed. Note:- (i) Making good of disturbed surfaces will be done by contractor without any extra cost to department (ii) 3 runs of 4 Sqmm conductor and one run of PVCcasing caping min 25mm dia shall be measured as one unit RM length. |
| 43 | M&L for Sub main wiring with 2 single core 6.00 sqmm 1100 volt grade, PVC insulated stranded copper conductor FRLS-H cable with one run of continuos coper earth conductor of 6 sqmm and including PVC casing capping of suitable size dia including taking down and submain wiring complete all as specified and directed. Note : (i) Making good disturb surface will be done by contractor without any extra cost.(ii) 3 Run of 6 sqmm conductor and one run of PVC conduit shall be measured as one unit. |
| 44 | S&F LED light fitting surface and wall mounted LED batten with integrated electronic driver complete in all respect of 10W capicity including talking down old unserviceable fitting and making good the disturbed surfaces complete all as specified and directed. |
| 45 | Supply and fix LED Tube light fittings 20W Surface and wall mounted LED batten, integrated electronic driver complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector. including taking down old unserviceable fittings and making good the disturbed surfaces complete all as specified and directed. |
| 46 | S&F LED light fittings 2'x2' of capacity 36 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements including taking down old unserviceable fittings and making good the disturbed surfaces complete all as specified and directed. |
| 47 | Supply and fix lamp holder (angle/bracket) insulated body with back plate for batten fittings including LED bulb of cap 8W 2 pin type complete for 230V 50Hz AC supply complete all as specified and directed. |
| 48 | S&F LED flood light 120 W flood light luminaire with ultra high sleek, light weight with secondary optics made of pressure die-cast housings with toughned glass and individual high power LEDs with secondary optics IP 66 rating alongwith connected accessories including taking down old unserviceable fittings etc and making good the disturbed surfaces complete all as specified and directed.Note: Necessary ladder arrangement shall be made by contractor to change the lights at heights in sheds. |
| 49 | S&F LED flood light 100 W flood light luminaire with ultra high sleek, light weight with secondary optics made of pressure die-cast housings with toughned glass and individual high power LEDs with secondary optics IP 66 rating alongwith connected accessories including taking down old unserviceable fittings etc and making good the disturbed surfaces complete all as specified and directed.Note: Necessary ladder arrangement shall be made by contractor to change the lights at heights in sheds. |
| 50 | S&F round recessed cum surface mounted AL die - cast LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15W LED downlighter of white/neutral white 6500K color temperature etc. prewired and all accessories including taking down old unserviceable fittings etc and sheet cutting if any making good the disturbed surfaces complete all as specified and directed. |
| 51 | S&F LED security light of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired including taking down old unserviceable fittings etc and making good the disturbed surfaces complete all as specified and directed. |
| 52 | Supply & fix electronic driver suitable for 2'x2' LED light fitting 28/36 Watt system power ISI Marked including taking down old unserviceable driver complete all as specified and directed. |
| 53 | Supply & fix electronic driver suitable for round LED light fitting 15/18 Watt system power ISI Marked including taking down old unserviceable driver complete all as specified and directed. |
| 54 | Supply & fix electronic driver suitable for LED light fitting 120 Watt system power ISI Marked including taking down old unserviceable driver complete all as specified and directed. |
| 55 | S&F MCB TPN DB 4 way double door with rated current capacity rated busbar 415 V, complete all as specified and directed. |
| 56 | S&F MCB SPN DB 8 way, double door, with rated current capacity rated busbar 240 V, complete all as specified and directed. |
| 57 | S&F MCB SPN DB 4 way, double door, with rated current capacity rated busbar 240 V, SPN complete all as specified and directed. |
| 58 | S&F vertical 4 way TPN DB double door, recess mounted/wall mounted, 3 pole V-Tec of rated current capacity & breaking capacity MCCB as incomer and outgoing MCB SP/SPN/TP, MCCB's is to be pre-fitted including taking down old MCB DB complete all as specified and directed. Note : (i) Empty space shall be covered by blanking plate and connecting with lugs without any extra cost to department. (ii) Rate quoted by contractors shall be demed to be including of MCCB/MCB/SP/SPN/TPN of required braking capacity |
| 59 | S&F in replacement MCCB 100Amps, 16KA, TP 415 Volts with adjustable thermal and fixed magnetic setting with including cable entry arrangements, lugs, glands etc and fixing arrangements such as fastener, nuts, bolts complete all as specified and directed. |
| 60 | S&F in replacement MCB Single pole rated capacity 6 to 32 Amps, 240 V breaking capacity 10 KA, C- curve complete all as specified and directed. |
| 61 | S&F in replacement MCB double pole of rated capacity 32 Amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified and directed. |
| 62 | S&F in replacement MCB four pole of rated capacity 40/63 Amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified and directed. |
| 63 | S&F in replacement 1100 volts grade heavy duty cable PVC insulated copper conductor, three core cable flat or circular of size 6.0 sqmm all including PVC tags/Clips and fixing hardwares complete all as specified and directed. |
| 64 | M&L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed. |
| 65 | Taking down ceiling fan of any size, sealing cable end, dismantling blades and removing fan and blades to storeyard of AGE E/M complete all as specified and directed. |
| 66 | Hanging only ceiling fan of any size afrer Refixing of fan blades, replacement of split pin and connecting up including provision of cable of suitable size from ceiling rose/connector to fan complete all as specified and directed. |
| 67 | Hanging/fixing only wall fan exhaust fan and connecting up including provision of 3 core copper cable white in colour from ceiling rose/connnector to fan including replacement of split pin complete all as specified and directed. |
| 68 | M&L for cleaning, servicing and overhauling of ceiling fans of 1200 mm size including lubricating, greasing and painting with one coat of synthetic enamel white paint and writing MES No on it complete all as specified and directed. |
| 69 | All as per srl item no 68 above but Exhaust fan of 300 to 450 mm size. |
| 70 | All as per srl item no 68 above but Wall mounting fan of 400 mm size. |
| 71 | Supply and fix LEDs invertor batten LED Tube light 20 watts CDL with surge protection, energy efficient, complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including taking down old unserviceable fittings and making good the disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 72 | Supply and fix LEDs invertor batten LED Tube light 20 watts CDL with surge protection, energy efficient, complete including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector including taking down old unserviceable fittings and making good the disturbed surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
