|
| 1 | Bldg Wk (Repair Wks) |
| 2 | Item No. 01 : Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified. |
| 3 | Item No. 02 : M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured epoxy grout for tile joint over and including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 4 | Item No. 03 : M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified. |
| 5 | Item No. 04 : M&L 9 to 10 mm thick for Virified Ceramic tiles light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 6 | Item No. 05 : -ditto- all as item No 4 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 7 | Item No. 06 : Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified. |
| 8 | Item No. 07 : M&L for Granite slabs (of any type) 20mm thick machine cut bedded laid over and including cement mortar screed bed 15mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed with white/coloured epoxy grout for tile joint with admixture of pigment to match the shade of slab and polishing complete all as specified and as directed. |
| 9 | Item No. 08 : M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed. |
| 10 | Item No. 09 : Mirror polish on kota stone flooring /skirting wherever required to give high glossy finish as per direction of Eng-in-Charge, complete all as specified and as directed. |
| 11 | Item No. 10 : All as per item no 8 above here in before but in skirtings with including 10mm thick cement mortar in CM 1:4 complete all as specified and as directed. |
| 12 | Item No. 11 : Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified. |
| 13 | Item No. 12 : Treatement for sunken portion is as follows :-Demolition of cement concrete as in sunken floor filling complete and cleaniong of all loose particles and removing debris out of MoD land. |
| 14 | Item No. 13 : Laying of 30 mm thick (min) PCC M20 (Nominal mix) using 12.5 mm graded stone aggregate mixed with integral water proofing compound as per manufacturer's instruction on bottom of sunken portion with proper slope towards spout. |
| 15 | Item No. 14 : Applying rendering 15 mm thick in CM (1:3) mixed with liquid water proofing compound as per manufactirer's instruction , and surfaces finished even and smooth with using extra cement on sunken portion of WC/Bath while PCC is green. The rendering should be extended to vertical sides of sunken portion.Note: WPC will be measured and paid separtely |
| 16 | Item No. 15 : S&F GI pipe 40 mm dia light grade as in spout pipe in sunken portion of WC/Bath to drain out seepage water. The spou pipe shall be extended 450 mm from outer face of wall, complete all as specified and directed. |
| 17 | Item No. 16 : Providing and applying two coats of polymer based chemical (Dr Fixit Pidifin 2K or Sika Top Seal-107 or Fosroc Brushbond 110 or equivalent of any other approved make) as per manufacturer's instructions as water proof coating over bottom and sides of sunken portion after carry out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, complete all as specified and as directed. Note :- (i) This Application shall be done after laying all sewage/plumbing pipes with all fixtures in position. (II) After application of this treatment, testing shall be done for water tightness by pounding for 72 hours and if any leekage/seepage noticed , same shall be rectified by the contractor before claiming the payment aginst this items) |
| 18 | Item No. 17 : M&L cement concrete 1:5:10 type E-2 using granded crushed brick aggregates as in sunken portion of WC/Bath etc complete all as specified and as directed |
| 19 | Item No. 18 : M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of complete all as specified and as directed |
| 20 | Item No. 19 : Supply only liquid water proofing compound. |
| 21 | Item No. 20 : M&L for 50mm thick PCC type B-2, 1:2:4 (using 00 mm graded aggregrate) laid in alternate panels (not more than 2 m on either side) as in floor finishing, around the bldg plinth and making cement concrete surface even and smooth without using extra cement complete all as specified. |
| 22 | Item No. 21 : Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed. |
| 23 | Item No. 22 : M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed. |
| 24 | Item No. 23 : M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | Item No. 24 : M&L for preparation of newly plastered surfaces and applying two coat Acrylic emulsion over and including a coat of primer over and including 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:- primer and emulsion paint shall be applied through air less spray machine (Mechanical means) |
| 26 | Item No. 25 : M&L for complete removal of existing treament and preparation of surfaces and applying two coat of Acryic emulsion over and includind a coat of primer over and including a coat of 1mm thick wall care putty on prepared surface to achive the surface even and smooth for painting complete all as specified and directed (Note:-Contractor shall furnished gurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machin (Mechanical means) Make :- Asian (Tractor emulsion) Dulux (A-700) Nerolac (Beauty Gold) Berger (Pit Bision acrylic interiror emulsion) |
| 27 | Item No. 26 : M&L for applying two coats of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed. |
| 28 | Item No. 27 : M&L for applying two coats of synthetic enamel paint on old steel surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and as directed. |
| 29 | Item No. 28 : S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), P/S trap,white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and as directed. |
| 30 | Item No. 29 : S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. |
| 31 | Item No. 30 : S&F Vitreous China wash basin,(flatback/angle back), size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 32 | Item No. 31 : S&F in repair brass chromium plated bottle trap for wash basin 32 mm bore with inlet and outlet screwed for pipe or connection and with one cleaning cap, complete all as specified and diretced. |
| 33 | Item No. 32 : S&F in repair 5.5mm thick looking mirror of size 600 x 900mm rounded edge at each mirror of selected quality glass without frame, mounted / fitted to wall with projected stainless steel studs and ss screws (4 No's on each glass) complete all as specified and directed. |
| 34 | Item No. 33 : S&F in repairs PVC mirror cabinet of size 600mmx450mm complete all as specified and as directed |
| 35 | Item No. 34 : S&F in repair chromium plated brass wall mixer, 3-in-1 fancy type, connection to overhead shower complete with wall flange (without hand &over head Shower) screwd down for15 mm GI bore pipe complete all as specifed and directed |
| 36 | Item No. 35 : S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed (make; Jaquar & higher makes) |
| 37 | Item No. 36 : S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 38 | Item No. 37 : S&F in repairs Health Faucet ABS body with Rubbit Cleaning System , 1.25 m Long Flexible Tube & ABS Wall Hook, incl making connections & fixing in position complete all as specified. |
| 39 | Item No. 38 : S & F in repairs PVC (SWR) Floor trap/Nahani trap of size 150 x150 mm, plain or multi with stainless steel matt finish pop up grating, chrome finish with locking type, fixed to epoxy solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. |
| 40 | Item No. 39 : S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 41 | Item No. 40 : S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 42 | Item No. 41 : S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 43 | Item No. 42 : S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. (make; Jaquar & higher makes) |
| 44 | Item No. 43 : S&F in repair CP toilet paper holder brass, chromium plated/stainless steel, fixed with screws complete all as specified and as directed. |
| 45 | Item No. 44 : S& F 18 mm thick factory made cupboard shutter with one side decorative and other side balancing lamination factory pressed OSL HDHMR board of action tessa and equivalent including 2mm thick PVC edge bending tape with not glue by edge bending machine (Wherever required) of density 850 kg/cum etc complete all as specified and directed |
| 46 | Item No. 45 : S& F 18 mm thick factory made modular both side balancing lamination factory made HDHMR of Action Tessa and equivalent approved brand of boxes, shelves, racks, almirah, cupboards and drawer including 2mm thick PVC edge bending tape with hot glue by edge bending machine (Wherever Required), including necessary nails, screws etc of density 850kg/cum complete all as specified and directed. |
| 47 | Item No. 46 : S&F 8mm thick factory made modular both side prelamination BSB(both side balancing paper) HDHMR of action Tessa and equivalent as per IS:14587:1998 with suitable full threaded steel, screws etc on the backing of racks, drawers, cupboards, kitchen cabinet, under kitchen counter including 2mm thick PVC edge bending tape with hot glue by edge bending machine(wherever required), including necessary nails, screw etc of density 850kg/cum complete all as specified and as directed. |
| 48 | Item No. 47 : Supply and fixing in of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed. |
| 49 | Item No. 48 : S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . |
| 50 | Item No. 49 : S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00 mm) of any shape withside corrision resistence telescopic soft closing drawer channels on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed. |
| 51 | Item No. 50 : All as per item No 49 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. |
| 52 | Item No. 51 : All as per item No 49 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 53 | Item No. 52 : All as per item No 49 above but grain basket size 20 x 17 x 6 inches complete all as specified and directed. |
| 54 | Item No. 53 : All as per item No 49 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 55 | Item No. 54 : All as per item No 49 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed. |
| 56 | Item No. 55 : S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 57 | Item No. 56 : S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, waste coupling, waste pipe fittings and wastes, with rubber ring at base of bowl, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 58 | Item No. 57 : M& L for steel plate rack of size 900x750x250 made up of 1mm thick steel complete all as specified and as directed. |
| 59 | Item No. 58 : Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 60 | Item No. 59 : Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 61 | Item No. 60 : Supply and laying of CPVC brass elbow 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed. |
| 62 | Item No. 61 : Supply and laying of CPVC brass Tee 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed |
| 63 | Item No. 62 : Supply and laying of CPVC brass Male brass Adeptor(MTA/MBTA) 20 mm dia SDR-11 on wall /ceiling or laying in floor complete all as specified and as directed |
| 64 | Item No. 63 : S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 65 | Item No. 64 : S & F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 66 | Item No. 65 : S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 67 | Item No. 66 : S & F in repair 110 mm bore PVC (SWR) bend with acess door complete all as specified and directed. |
| 68 | Item No. 67 : S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 69 | Item No. 68 : S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 70 | Item No. 69 : S & F in repair 75 mm bore PVC (SWR) bend with acess door complete all as specified and directed. |
| 71 | Item No. 70 : S & F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 72 | Item No. 71: S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 73 | Item No. 72 : S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 74 | Item No. 73 : S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality, fixing with 2 nos 'T' - brackets complete all as specified and directed. |
| 75 | Item No. 74 : Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 76 | Item No. 75 : Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each & remove off the premises complete all as specified and directed. |
| 77 | Item No. 76 : Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and as directed. |
| 78 | Item No. 77 : S&F Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.complete all as specified and directed. |
| 79 | Item No. 78 : S&F Factory made solid/moulded panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete allas specified |
| 80 | Item No. 79 : S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc with cut and mitred beads for securing guaze/glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) including taking down of old ones complete all as specified and as directed. |
| 81 | Item No. 80 : S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wooden beading/tinned tacks/SS wire staples etc at any height of bldg complete all as specified and as directed. |
| 82 | Item No. 81 : S & F of Anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment complete all as specified and directed.Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design in M/s Royal grill / National grill. |
| 83 | Item No. 82 : Supplying and fixing factory made 28-30 MM thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size both side laminated,any colour/pattern, SS matt finish hanldles 150mm-02 nos, SS tower bolt 150mm -02 nos, SS sliding bolt 300mm-01 nos, SS 100mm door stopper -01 of each shutter, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed |
| 84 | Item No. 83 : S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 85 | Item No. 84 : S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 86 | Item No. 85 : S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified and directed. |
| 87 | Item No. 86 : S&F 125 mm size, butt hinges, heady weight, cold rolled mild steel complete all as specified and directed. |
| 88 | Item No. 87 : S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 89 | Item No. 88 : M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed. |
| 90 | Item No. 89 : S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and filling of gaps with epoxy grout, making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section No 21517 & size 92.00mm x 31.75mm x 2.0mm thick.(ii) Sliding shutter frame of cross section no 21515 & size 40 x 18 x 2.00mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5 mm thick figured/float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking System per shutter -01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall – 06 No per window. |
| 91 | Item No. 90 : S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, filling of gaps with epoxy grout, etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified and as directed |
| 92 | Item No. 91 : Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete as specified and directed. |
| 93 | Item No. 92 : M&L for Brick work with sub-class `B' burnt bricks, straight or curved on plan exceeding 6 M mean radius built in half brick wall bulit in cement mortar 1:4 complete all as specified and as directed. |
| 94 | Item No. 93 : S & F stainless steel cloth hangers of size 29.50 x 3 x3.5 cm with 6 No's hooks in each set fixed to wall/doors etc with steel screws of adequate length complete all as specified and directed. |
| 95 | Item No. 94 : Blank |
| 96 | Item No. 95 : M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge. |
| 97 | Item No. 96 : S&F Fibre reinforced plastic (FRP) manhole cover (with frame) of size 900mm X 600mm having load bearing Capacity 12.5 Ton, confirming to BS EN-124 and IS 1729-1991, complete all as specified and as directed. |
| 98 | Item No. 97 : S&F Fibre reinforced plastic (FRP) manhole cover (with frame) of size 600mm X 600mm having load bearing Capacity 12.5 Ton, confirming to BS EN-124 and IS 1729-1991, complete all as specified and as directed. |
| 99 | Item No. 98 : Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendents, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 100 | Item No. 99 : Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as directed by Engr-In-Charge. |
| 101 | Item No. 100 : Taking down existing ceiling fan/exhaust fan of any size and deposit the same in MES store Yard of AGE E/M-III complete all as specified and directed. |
| 102 | Item No. 101 : Taking up/down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/connector complete all as specified and directed by Engr-in-Charge. |
| 103 | Item No. 102 : Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box , cover plate and cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-(a) One light / fan /bell controlled by one, one way switch 5/6 Amps |
| 104 | Item No. 103(Contd.. 102(b)) : One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch. |
| 105 | Item No. 104(Contd… 102(c)) : One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch. |
| 106 | Item No. 105 : Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size and making good disturbed surface of walls and floors etc. complete all as specified and directed |
| 107 | Item No. 106 : S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V |
| 108 | Item No. 107 : S & F modular switch 1 way 6 A , 1 module complete all as specified and directed. |
| 109 | Item No. 108 : S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 110 | Item No. 109 : S/F switch modular type 16 A, 1 module complete all as specified and directed. |
| 111 | Item No. 110 : S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 112 | Item No. 111 : S&F lamp holder insulated body with back plate for batten fittings complete all as directed. |
| 113 | Item No. 112 : Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel . Lithium lon battery with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories and taking down old unsv complete all as specified and directed. |
| 114 | Item No. 113 : Supply and fixing 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories and taking down old unsv complete all as specified and directed. |
| 115 | Item No. 114 : Supply and fix LED bulb of 7 watt, Of base B-22,6500 K suitable for fixing in lamp holder and taking down old unsv complete all as specified and directed. |
| 116 | Item No. 115 : Supply and fixing (in replacement) 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 to 40 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. all as specified and directed. |
| 117 | Item No. 116 : Supply and fixing (in replacement) 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 118 | Item No. 117 : M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed. |
| 119 | Item No. 118 : M & L sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 04 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the samecomplete all as specified and directed.NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. |
| 120 | Item No. 119 : S&F exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever making good disturbed surface, painting to match with existing surface complete all as specified and directed. |
| 121 | Item No. 120 : Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 200 mm sweep with louver ,white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 122 | SCHEDULE \\"A\\" (Schedule of credit )Schedule of Credit Rs 4,40,105 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) SCHEDULE OF CREDIT SPECIAL REPAIR TO TOILET AND KITCHEN OF BLDG NO. SM-283, SM-284, SM-294, SM-281, QTR NO. 1A & 2C OF SM-293, AND QTR NO. 1C, 2C & 3D OF SM-285 (JCO OR MD ACCN) AT GANESH ENCLAVE UNDER GE (MCTE) MHOW Sl No Decriptipin of work Unit Qty Rate Amount |
| 123 | Old unsv flushing cistern , PVC any capacity |
| 124 | Old unsv Wall mixer of any shape and size |
| 125 | Old unsv WHB wall mixer CP brass of any shape and size |
| 126 | Old unsv towel rail any type /any size |
| 127 | Old unsv CI/PVC floor trap with grating of any size |
| 128 | Old unsv PVC connection of any size |
| 129 | Old unsv brass/CP bib taps, stop cock , pillar tap 15 mm dia |
| 130 | Old unsv CP shower rose, health faucet, paper holder of any type/size |
| 131 | Old unsv particle board of any description |
| 132 | Old unsv stainless steel sink with draining board of any size |
| 133 | Old unsv GI pipe 15 mm |
| 134 | Old unsv chowkhats exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) along with iron mongery |
| 135 | Old unsv shutters of any description exc 1 sq. m and n exc 2 sqm along with iron mongery |
| 136 | Old unsv aluminium windows/Ventilator incl iron mongery complete |
| 137 | Old unsv PVC pipe 75/110mm incl fittings |
| 138 | Old unsv brick bats |
| 139 | Blank |
| 140 | Scrap Iron (old cover slab) |
| 141 | Old point, wiring such as PVC cable with out batten/conduit and MS box as existing of light, fan socket and power point. |
| 142 | Old Unsv switch, sockets, ceiling rose, bell, bell push, lamp holder etc. |
| 143 | Old unsv Metal enclosure. |
| 144 | Old unsv MCB SP/SPN |
| 145 | Old unsv light fitting any type. |
| 146 | Old unsv aluminium/copper submain wiring. Total : 440105.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
