|
| 1 | B&R PORTION:Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris from site to outside MoD land. |
| 2 | M&L for machine cut kota stone slab flooring 20-25 mm thick of size not less than 595 mm x 595 mm laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick cement screed bed or bedding layer in cement mortar 1:6 all as specified. |
| 3 | Taking down chowkat or frame with shutter( without taking off shutter from frame) area exc 1.5 Sqm & not exc 4 Sqm each with hardware fittings all as specified. |
| 4 | M&L for second class hard wood for plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified. |
| 5 | M&L for 30 mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides with lipping/ frame to match all as specified. |
| 6 | S&F for 250 mm long sliding door bolt of aluminium alloy, anodised with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, cast aluminium alloy and fixed all as specified. |
| 7 | S&F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 8 | Taking down cement or cement lime plaster including racking out joints, hacking for key and scrubbing down with water including removal of debris from site to outside MoD land. |
| 9 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces including finishing surface fair and even without using extra cement but mixed with liquid WPC as per manufacturer instruction complete. (Note :- WPC will be measured and paid separately). |
| 10 | Supply only liquid water proofing compound all as specified. |
| 11 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint all as specified. |
| 12 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces including finishing surface even and smooth without using extra cement all as specified. |
| 13 | M&L for prepration of newly plastered surfaces of wall and two coats of oil bound distemper over a coat of primer all as specified. |
| 14 | M&L for 25 mm thick cement concrete (1:2:4) type B-O using 12.5 mm graded crushed stone aggregate as in sub base all as specified. |
| 15 | M&L for glazed ceramic coloured tiles first quality of size 350 mm x 250 mm x 7/450 mm x 350 mm x 7 mm thick in vertical surface such as wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the tile over 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surfaces all as specified. |
| 16 | M&L for non skid coloured ceramic tiles (first quality) 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including 15 mm thick cement screed bed or bedding layer in cement mortar 1:6 all as specified. |
| 17 | S&F in repair 15 mm dia chromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete. |
| 18 | S&F in repair 15 mm bore chromium plated pillar tap, cast copper alloy, with captan head screwed down high pressure with or with out lettred Hot or Cold with long screwed shanks and fly nut screwed for iron pipe or for brass ferrule. |
| 19 | S&F in repair 15 mm bore chromium plated concealed type stop cock with long shank, cast copper alloy screwed down high pressure with crutch handle screwed for iron pipe all as specified. |
| 20 | S&F in repair 15 mm dia fancy type chromium plated angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe all as specified. |
| 21 | S&F for PVC waste pipe with adopter of suitable length of 32 mm dia for WHB or sink all as specified. |
| 22 | S&F in repair vitreous china Sqauatting pan \\"Orissa pattern\\" of size 580 mm x 440 mm white with intergral foot rests including cast iron 'P' or 'S' trap and PVC flush pipe all as specified. |
| 23 | S&F in repair vitreous china wash basin, white, flat back of size 550 mm x 400 mm including CP waste coupling, PVC waste pipe & brackets all as specified. |
| 24 | S&F for factory made PVC door frame of size 50 mm x 47 mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150 mm long brackets of 15 mm x 15 mm mild steel square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall suing MS screw of 65 mm / 100 mm size complete all as per manufacturer specification. |
| 25 | S&F for 30 mm thick factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed by Engineer-in-Charge. |
| 26 | S&F for 100 mm long mild steel butt hinges, cold rolled, medium type all as specified. |
| 27 | S&F for 125 mm extruded aluminium alloy handles, fabricated type, anodised. |
| 28 | S&F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe-290 (Gde E-165) all as specified. |
| 29 | M&L for preparation of newly steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide zinc chromate primer all as specified. |
| 30 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesall as specified. |
| 31 | Dismantling brick tiles of any thickness or description on roof slab including removal of debris from site to outside MoD land. |
| 32 | Demolition of mud in roof of any thick with plastering & leeping including removal of debris from site to outside MoD land. |
| 33 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in padding over slab for levelling course all as specified. Please Enable Macros to View BoQ information |
| 34 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in padding over slab for levelling course all as specified. Please Enable Macros to View BoQ information |
