|
| 1 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified. |
| 2 | M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc complete all as specified. |
| 3 | Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified. |
| 4 | Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed. |
| 5 | M&L 100mm thick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed. |
| 6 | M&L cement concrete 1:4:8 type D 2 (20mm graded stone aggregate) as in sub base, hard standing of 75mm thick, complete all as specified. |
| 7 | M&L cement concrete 1:2:4 type B 2 (20mm graded stone aggregate) as in finished floor of 40mm thick, complete all as specified. |
| 8 | M & L reinforcement cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc all as specified. |
| 9 | M&L reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (Nominal mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like including bonding agent , complete all as specified |
| 10 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 11 | Discription all as above item 15 but 5mm dia and over up to 10mm dia in stirrups and binders omplete all as specified and directed. |
| 12 | M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L form work to sides of pillars , posts, struts,pipers,coloumns and stanchions for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 14 | M&L form work to soffit of suspended salb such as roof slab, floor slabs ,landings and similar wor not exc 200mm thick for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 15 | M&L form work to sides and soffits of floor or roof beams ,beams hauanchings,griders,bressummers,lintels,cantilever , shelevs including supports,over hanges etc for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 16 | M&L form work to sides of slabs for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 17 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified. |
| 18 | M&L form work to footing,plinth beam , column and similar items including edges for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 19 | Demolition of brick work built in cement or cement lime mortar of any description including quoins, arches, pillars etc. all as directed. |
| 20 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 21 | All as per serial item No 2 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 01 shall be used).upto G+5 storey bldg complete all as specified. |
| 22 | Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified. |
| 23 | M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.) |
| 24 | M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 25 | M&L Rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 26 | Supply only integral water proofing compound (ISI marked). |
| 27 | M&L for preparing Newly plastered surfaces and apply a coat of 1 to 2 mm (1.5mm average) thick wall care putty for making smooth surface and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls complete all as specified as directed by Engr-in-charge. |
| 28 | M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 to 2mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth Exterior Paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) complete all as specified as directed by Engr-in-Charge. |
| 29 | M&L for preparation of newly plaster surface of wall applying two coats of cement base paint by spray gun/ spray machine and applying putty of 1 to 2mm thickness over plastered surface to prepare the surface even and smooth and finishing walls all as specified and all as directed by Engr- in-charge. |
| 30 | M&L Preparation of new plastered surfaces of ceilings/walls and applying three coats of white wash complete all as specified and directed. |
| 31 | Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge. |
| 32 | Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. |
| 33 | S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 complete |
| 34 | All as per item no. 33 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. |
| 35 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 36 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 . |
| 37 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 38 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) |
| 39 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in- charge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter including edge lipping of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder / rice husk/ wheat husk) and not toxic additives (maximum toxicity index of 12 for 1 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws, all as per direction of Engineer-in-Charge (Note: Stainless steel butt hinges and necessary S S screw shall be paid separately) complete all as specified and directed.”Note: MTC and Screw Out Test will be provided by Contractor. |
| 41 | S & F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER including edge lipping consisting of density 650 kg/cum manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test will be provided by Contractor. |
| 42 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, |
| 43 | S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc |
| 44 | M&L Transomes or mullions, straight, for solid frames of any description, wrought, framed, double rebated on the solid, rounded or chamfered (including weathering to transome, if required put together with glue, pinned at joints), supplied and fixed complete all as specified. |
| 45 | S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc including aluminium grill complete all as specified. |
| 46 | S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 47 | S&F Powder Coated aluminium window and ventilator shutters, side hung type OR sliding window without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. |
| 48 | S&F 4.00 mm thick plain sheet glass and glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified. |
| 49 | S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) |
| 50 | S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) |
| 51 | S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) |
| 52 | S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) |
| 53 | S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed. |
| 54 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 55 | Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified. |
| 56 | All as per item No. 55 above but 15mm bore |
| 57 | Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete with fitting as required. |
| 58 | All as per item No. 57 above but 25 mm bore tubing. |
| 59 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed. |
| 60 | M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified. (ISI Marked) |
| 61 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roofcoverings complete all as specified and directed |
| 62 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 63 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, metre rooms shaft area any description complete all as spd. |
| 65 | S & F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165. |
| 66 | M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 67 | S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair vitreous china squatting pan of orissa pattern long pan size 510 x 400 mm white with \\"p\\"or \\"S\\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 69 | S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 72 | S & F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair CP grating 125mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F in repairs fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complete all as specified and directed by Engineer-in-Charge.Make : Prayag, Atul, Commander |
| 76 | S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed by the Engineer-in-Charge.Make Cardin or equivalent to ISI marked |
| 77 | S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as directed. |
| 78 | S & F in repairs vitreous chinaware wash hand basin of size 405 x 325 x 145 mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specified and directed by Engr-in-charge |
| 79 | S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent |
| 80 | S & F Prefabricated Factory made FRP Chajja 4mm thick of required size, colour and design made by Resin Transfer Moulding (RTM) machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature of easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50x2 mm thick MS flat with 12mm in built hole for grouting on existing wall alone with the 50mm flanges duly inserted and sealed in the wall minimum width not less than 450mm complete in single piece casted monolithically incl all necessary fittings. |
| 81 | Excavating in post holes (similar holes) each not exceeding 0.50 Cum getting ot, returning filling in ramming earth and broken rubbel mixed with earth around ,in layers not exceeding 25cm in soft/loose soil all as specified and directed |
| 82 | S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, including two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. conforming to Fe -290 Gde E-165 comple all as specified and directed. |
| 83 | S&F Chain link MS galvanisd fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire any size or type complete all as specified and directed. |
| 84 | S&F Mild steel screw bolts (machine made) any dia size with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed. |
| 85 | Supply only Mild steel in flat, round or square bars, in available lengths Fe 450 W (Gde E-250 quality A) |
| 86 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land. |
| 87 | M&L 75mm thick PCC (1:4:8) type D 2 (40mm graded stone aggregate) as in sub base, complete all as specified. |
| 88 | M&L Sand filling (sand cushioning) under floors or in foundation incl watering and consolidation all as spd and directed. |
| 89 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment all as spd and directed |
| 90 | M & L Providing, Type B1 (1:2:4) 20 mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including eathering, slightly rounded or chamfered angles and throating, as directed |
| 91 | S&F in repair 20 mm Dia stainless steel tube for curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. |
| 92 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 93 | Taking down submain wiring of any description and any type/size. |
| 94 | Taking down old/unsv three phase induction motor with pump of 10 HP and transporting it to MES store yard of AGE E/M (Central) including all T&P and connected accessories and transportation charges etc as all directed at site by Engr-in-Charge. |
| 95 | Taking down distribution board of any rating/type/size or other descriptions all as directed at site completes. |
| 96 | Taking down LT panels of any rating/type/size or other descriptions after disconnecting all electrical connections etc all as specified. |
| 97 | Supply, installation, testing and commissioning of three phase centrifugal pump and motor set coupled, having induction motor 10HP/7.5 KW, 415 volts, not less than 1450 RPM, insulation class 'F', SP-55 including mounting frame of MS channel of suitable size and nuts, bolts and washers duly grouted in PCC foundation of ratio as recommended by OEM for anti vibration support of pump and motor, surface mounted motor ,coupled, solid handling including self priming non clog sewage pump with stainless steel impellor, rubber coupling and coupling guard frame,1450 RPM total head 19 mtr, discharge 28 ltr/sec, head range 10-28 mtr, size 100x100mm, directly coupled with motor by means of rubber coupling complete with mechanical sealing and making all electrical and pipe connections of any dia/type and testing on completion upto entire satsifaction of Engr-in-Charge all as specified and directed. Note: PCC shall be measured and paid separately. |
| 98 | Supply, installation, testing and commissioning factory fabricated and tested LT Panel board Indoor type,made out of CRCA sheet not less than 2mm thick,CPRI approved, platform mounted of suitable size, 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic copper bus bars of capacity 250 Amps rating installed on DMC insulators with bus bar chamber, cable alley,dust and vermin proof, IP-42, front opening type with aprons for cable entry, with proper ferrule & cable gland, prewired with PVC insulated multistranded copper conductor FRLS cable of suitable size but not less than 1.5 sqmm complete 1100 volts grade mounted at suitable working height with adequate workable ground clearnce on MS frame not less than 50x50x3mm having anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade and comprising of the following:- BUS BAR CHAMBER:- (a) 250 Amp three phase and neutral copper conductor, with color coding with heat shrinkable sleave and shall be mounted on non-hygroscopic, non-combustible, high strength DMC material, inter connection of all incomings & outgoings.INSTRUMENT CHAMBER:- (i) Volt Meter 96mmx96mm,flush type rated 0-500V, Digital type with selector switch- 01 Set. (ii) Amp Meter,96mmx96mm,flush type rated 0-200 Amps digital type with suitable size CT's (for three phase)- 01 Set . (iii) RYB Phase indicating lamp LED type with MCB 20A SP 'C' Series- 1 Set of three. INCOMING:- (i) MCCB 125 Amps 25 KA , 4 Pole with adjustable thermal magnetic release-01 Nos. Make of MCCB:- Siemens / Legrand/ Schneider.OUTGOING:- (i) MCCB 4 Pole 63 Amps, 415 volts, 50Hz, 16 KA-03 Nos. (ii) MCB 2 Pole 10 Amps, 415 volts, 50Hz, 10 KA-01 Nos. (iIi) Automatic star delta starter for 10 HP to 15 HP Motor three phase 415 Volt -02 Nos , Make : Havells/L &T or Equivelent. (v) Panel wiring for control circuit with copper cable 1.5 sqmm & power wiring minimum 4 Sqmm PVC insulated 1100 volts grade. (vi) PCC of suitable ratio for foundation etc. |
| 99 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 25x4 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and shown in electrical plate number 3 of MES SSR part-I. (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 7.5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 100 | M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip. |
| 101 | Supply and fixing Aluminium strip 25x3.15mm fixed with saddles and fixing screws for roof conductors and down conductors above ground and connecting it with earth lead all as specified and directed at site. |
| 102 | Supply and fix air termination rod single pointed Aluminum rod 12mm dia 300mm long including all fixing materials such as nuts, bolts and washers etc all as pscified and directed. |
| 103 | M&L test point terminal block made of Gun metal or phosphorous bronze size 75x75x25mm drilled and screwed including 03 Nos 8mm dia 25mm long hexagonal screws complete. |
| 104 | M&L tube medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid on floors of dia 100mm including all accessories and fittings and welding etc as required at site all as specified. |
| 105 | Supply and fix in replacement sluice valves cast iron body 100mm, PN-1.0 complete with brass spindle and hand wheel including joints and fixing material including taking down old unsv sluice valve complete all as specified and directed. |
| 106 | Supply and fix in replacement non return valves cast iron body 100mm, completeand fixing material including taking down old unsv valve complete all as specified and directed. |
| 107 | Supply and fix in replacement foot valves cast iron body 100mm, completeand fixing material including taking down old unsv valve complete all as specified and directed. |
| 108 | M&L tube medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid on floors of dia 40mm including all accessories and fittings as required at site all as specified. |
| 109 | S&F single runs of 16 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable drawn through and including 25 mm dia non metallic PVC conduit and conduit accessories on surface of walls/ceiling etc and making necessary electrical connection by means of suaitbale size lugs, nuts, bolts and washers as required at site complete all as specified and directed. |
| 110 | M&L for providing cement concrete in roof kerbs or mud stops, rounded or chamferted on edge type B1 1:2:4, (using 20mm graded aggreggate) all as specified and directed. |
| 111 | Supply and fix MCB DB SPN 8 way Horizontal, IP-43 Protection double door 240 V AC 50Hz suitable for mounting of MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar, neutral link earth link complete all as specified. |
| 112 | Supply and fixing in replacement miniature circuit breaker (MCB) of single pole and neutral and current carrying capacity 40 amps 240V 10KA 'C' curve testing and commissioning including making necessary electrical connections by means of suitable size lugs/thimbles all as specified and directed. |
| 113 | Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including making necessary electrical connections by means of suitable size lugs/thimbles all as specified and directed.. |
| 114 | S&F in repair Sub main wiring with two runs of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls complete all as specified and directed. |
| 115 | Supply and fixing LED street light fitting 60 watt 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp, impact and corrosion resistant including thermal management in multiple optics having IP 66 protection and making neceassy electrical connections all as specified.Note: Copper cable shall be measured and paid separately. |
| 116 | GI bracket 40mm bend to shape including clamps,nuts, bolts and washers and grouting in wall and painting with two coats of black enamelled paint over a red of red oxide primer all as specified. |
| 117 | M&L copper three core cable 1.5 sqmm for connecting street light with connector all as specified and directed. |
| 118 | Taking down of old unsv garden/gate light fittings of any description including service connection/wires of any dia or size and accessories etc complete. |
| 119 | Supply and fixing LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete of 15 watt all as specified and directed . |
| 120 | Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot free lighting having IP 65 protection complete of 10/15 watt including PCC mounting base of suitable size made out of cement concrete of 1:3:6 type C2 (using 40mm stone aggregate) and mounting nuts, bolts and washers etc and making necessary electrical connections with suitable size copper cable all as specified and directed. |
| 121 | Supplying, laying or fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene (XLPE Cable) insulated, 10 sqmm 2 core galvanised steel strip or wire armoured, ISI-7098 Mark, with aluminium conductor mutli stranded, heavy duty 1100 Volts complete all as specified laid in trenches/laid under floor or fixed naked with walls/ on poles/ in ducts / in GI pipes etc. complete all as specified and directed. (Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles / block, Clamps, nuts, Bolts, washres and pipe shall be measured and paid separately under appropriate items). |
| 122 | Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified. |
| 123 | Supply, laying and jointing (HDPE) of 40mm dia and pressure rating 6 kgf/cm2 for cable protection including tee,bend,elbow and other accessories complete all as specified and directed |
| 124 | Supplying and fixing (in repairs) Galvanised mild steel tubing, 'Light grade' of 40 mm bore complete with all fittings, laid in trenches/ under roads, drain, paths, fixed to poles/walls with Mild steel clamps, bolts, nuts and washerws complete all as specified of the following bore (Note :- Excavation & Earth work shall be measrued and paid separately) |
| 125 | M&L for glow sign board made out of chromium nickle based stainless steel frame 304 grade of size 1.50 Mtr x1.50 Mtr and height not less than 3 mtr fabricated with stainless steel frame and pipe of 40mm dia and sheet not less than 3mm thick and mounted/erected on SS pipe of 50mm and writing letter with white radium shade on navy blue background as “SEWAGE INSTALLATION, MILITARY ENGINEER SERVICES, AGE E/M (CENTRAL), GARRISON ENGINEER (CENTRAL) DELHI CANTT” of suitable size as directed by Engr-in-Charge and fixing/grouting it at suitable height including mounting bracket/legs fixed into ground on PCC plateform of suitable size or as directed at site by Engr-in- Charge and including of all welding/grouting in PCC and other materials all as required at site and testing on completion of job. |
| 126 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through rigid PVC conduit, including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box/M S Steel terminal boxes, concealed in walls with suitable modular inner and outer plate,top sheet cover for housing switches,socket out let and fan regulators etc, all as specified and as directed for the followings:- |
| 127 | One light/fan or bell point controlled by one way switch with 1.5 sqmm copper cable PVC insulated FRLS complete. |
| 128 | One 3 pin 5 Amps socket outlet point controlled by one switch on same board with 1.5 sqmm copper cable PVC insulated FRLS complete. |
| 129 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board with 1.5 sqmm copper cable PVC insulated FRLS complete. |
| 130 | All as item No-126 above but with cable 4 sqmm copper cable PVC insulated FRLS complete. |
| 131 | S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified. |
| 132 | S&F Modular socket outlet 2/3 pin 6 Amp socket combined 2 module complete all as specified. |
| 133 | S&F Modular socket outlet 2/3 pin 6A/16 Amp socket combined 2 module complete all as specified. |
| 134 | S&F Modular fan regulator step type 2 module 120W complete all as specified. |
| 135 | S&F bell ding dong AC 230 volt single pole. |
| 136 | S&F bell push modular type 6A single module. |
| 137 | M&L ceiling rose 3 phase polycarbonate isolated body complete. |
| 138 | S&F in replacement LED light fitting 1x20 watts 220 Volts AC decorative type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 139 | S&F in replacement LED light fitting mirror type with high out put diffuser, 2 feet 10 watt with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 140 | Supply and fixing lamp holder polycarbonated type with back plate suitable for batten fittings. |
| 141 | S&Fin replacement LED light fitting 1x9 watt/1x10 watt bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 142 | Supply ,install and testing all in one integrated solar LED street light 35 watts with IP-65 protection compact design, pole mounting bracket, microwave based motion sensor for optimising battery autonomy with factory setting dimming profi;e alongwith microwave sensor for run time maximization,all as specified and directed by Engineer-in-Charge.ALL IN ONE INTEGRATED SOLAR LIGHT: Solar panel with lithium ferro phosphate battery and charger built into the luminaire. |
| 143 | Supply and fix 7 mtr octagonal pole with base plate and J bolts. |
| 144 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundation of pole and mass concrete complete all as specified and directed. |
| 145 | M&L for cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foundation of stay and coping around poles complete all as specified and directed. |
| 146 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or secring with clips. |
| 147 | Schedule of Credit Please Enable Macros to View BoQ information |
