|
| 1 | Demolition of PCC in ground floor and paving’s n. exc 15 cm thick below or above ground level and M & L for Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundation, filling and mass concrete) as in sub base of floors complete all as specified and as directed. |
| 2 | M&L for 25mm thick PCC 1:2:4 type B 0 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and as directed. |
| 3 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded aggregate) as in plinth protection etc laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 4 | Material and labour PCC 1:2:4 Type B-1 (using 20mm graded mechanically crushed stone aggregate) as in bonding/locking of edges of interlocking tiles including weathering and slightly rounded or chamfered on edges and threating including necessary form work complete all as specified and as directed. |
| 5 | M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed. |
| 6 | Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed. |
| 7 | M&L for Sand filling under floors/Pavement or in foundations including watering and consolidation. |
| 8 | M&L Rubber Moulded interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and as directed. |
| 9 | M&L for rubber Moulded Chequered coloured tile size 300x300x20 mm using table vibrator or equivalent as in jointed and pointed in neat cement slurry over and included 15 mm screed cement mortar (1:6) and pigment size conforming and dismantling old floor tile complete all as specified and as directed. |
| 10 | M&L for brick work with sub class ' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 including demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 11 | All as per item No 10 here-in-before but except bricks. |
| 12 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles and M&L for walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 13 | Description all as per item No 12 above but except stone. |
| 14 | M&L for plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in coping including weathering slightly rounded or chamfered angles etc all as specified and as directed. |
| 15 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drain complete all as specified and as directed. |
| 16 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 17 | M&L for 15mm thick rendering on stone masonry surfaces or surface other than fair face of brick-work etc in cement mortar 1:4 complete all as specified and as directed. |
| 18 | M&L cement concrete in foundation 1:3:6, type C 2, using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed. |
| 19 | M & L precast cement concrete 1:3:6 type, C-1, using 20 mm graded stone aggregate as in boulders (for stone walling bond stone) and set in cm 1:4 complete all as specified and as directed. |
| 20 | Material and labour for rendering 15mm thick on any faces of brick wall or concrete surface in CM 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as directed. |
| 21 | M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement). |
| 22 | M&L for Rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 24 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 25 | S & F in repair for RCC pipes class NP-3, 300mm dia laid and jointed complete with collars as required complete all as specified and directed. |
| 26 | Supply and fixing in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 27 | All as per srl item No 26 above but 75mm bore complete all as specified and as directed. |
| 28 | Supply and fixing PVC (SWR) bends any radius for 110mm pipe complete all as specified and as directed. |
| 29 | All as per item No. 28 above but for 75mm pipe complete all as specified and as directed. |
| 30 | S& F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 31 | S & F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 32 | S & F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete including dismantling of old tiles complete all as specified and as directed. |
| 33 | S & F machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 34 | All as per Ser Item No 33 above in skirting including 15mm thick rendering in cement mortar 1:4. |
| 35 | M & L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite over 15mm thick screed bed or rendering in cement mortar 1:4 complete all as specified and as directed. |
| 36 | S&F in repair chromium plated shower rose 125 mm size with or without swivel joints any size including to fixing to steel pipe or union complete all as specified and as directed. |
| 37 | S&F in repair vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 type complete all as specified and as directed. |
| 38 | S&F in repairs vitreous China squatting pan Orrisa pattern size 580 x 440mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including connection to trap and to flushing to pipe, anti siphonage pipe etc including provisioning of cement concrete complete all as specified. |
| 39 | S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed. |
| 40 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white including connection to out going pipe and to flushing pipe and antisyphonic pipe etc including seat cover complete all as specified and as directed. |
| 41 | S&F in repairs one piece vitreous China wash down water closed pan (pedestal pattern) including integrated flush tank, white or coloured including 'P' or 'S' trap etc complete all as specified and as directed. |
| 42 | S&F in repair Vitreous China urinal, half stall type white (excluding flushing cistern, flush pipe) including PVC waste pipe, providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed \\"as in repair\\" complete all as specified and directed. complete all as specified and as directed. |
| 43 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 44 | S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board including aluminium beading complete all as specified and as directed. |
| 45 | S&F for in repair stainless steel sink without drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 46 | S&F in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and as directed. |
| 47 | M & L for 500 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 500 but not exc 1000 Litres complete all as specified and as directed. |
| 48 | S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron complete all as specified and as directed. |
| 49 | Demolition of cement Concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 50 | M & L for providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) (nominal mix) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 51 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 52 | M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 53 | Taking down Chowkhats or frames not exc. 1.5 sqm each (without taking off shutter from frames) complete all as specified and as specified and as directed. |
| 54 | Taking down Chowkhats or frames exc. 1.5 sqm each but n exc 4.00 Sqm each (without taking off shutter from frames) complete all as specified and as specified and as directed. |
| 55 | Taking down Shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed. |
| 56 | M&L for resecuring or easing and adjusting without taking down shutters of any description exc 1 sq. m but n exc 2 qm each complete all as specified and as specified and as directed. |
| 57 | S&F factory made uPVC white colour Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminium track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) Area not exceeding 2.00 sqm each. |
| 58 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 59 | S&F 12 mm Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 60 | S&F 3mm Sheet glass, ordinary quality and glazing with oil putty frosted, on one side in square exc 0.5 sq. m in each panel complete all as specified and directed. |
| 61 | Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubbing down with water etc complete all as specified and as directed. |
| 62 | M & L Preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mass and efflorescent salts and trading oil and greasy spots and apply one coat of white wash complete all as specified and as directed. |
| 63 | M&L for preparation of old surfaces of wall all as per item No 1 here in before and apply one coat of cement base paint on wall including curing complete all as specified and as directed. |
| 64 | M&L for preparation of old surfaces of wall and applying two coat of cement base paint over one coat of chalk whiting primer on wall including complete removal of existing treatment complete all as specified and as directed. |
| 65 | All as per item No 64 above but one coat of oil bound distemper on wall surfaces. |
| 66 | M&L for preparation of old plastered surfaces and applying two coats of Oil bound distemper over a coat of primer applied over 3mm thick super fine wall care putty finish including preparing the surfaces even and smooth complete all as specified and as directed. |
| 67 | Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work and M & L second class soft wood in scantling clean swan below or above ground level upto four storey building, complete all as specified and as directed. |
| 68 | All as per item No 67 above but except timber. |
| 69 | Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet and M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling. |
| 70 | Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet and providing plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in wall linings complete all as specified and as directed. |
| 71 | Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet, and providing Veneered decorative plywood, 6mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling complete. |
| 72 | Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet M&L Veneered decorative plywood, 6mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in walls complete all as specified and as directed. |
| 73 | M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails. |
| 74 | M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 75 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 76 | M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 77 | M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as complete all as specified and as directed. and as directed. |
| 78 | M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed. |
| 79 | Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 80 | M&L for Preparation of old/undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 81 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe. |
| 82 | S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20 mm dia complete to walls and ceiling or laid in floors of 20 mm bore. |
| 83 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipe. |
| 84 | S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore. |
| 85 | S&F in repair Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and as directed. |
| 86 | S&F in repair Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair. |
| 87 | S&F in repairs Brass CP mixer bore dia of 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified |
| 88 | S & F in repair Stainless steel curtain rod 25mm dia fixed with decorative brackets, stop roller and glass at the end etc complete all as specified. |
| 89 | M&L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and as directed. |
| 90 | M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and as directed. |
| 91 | M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provisioning of PVC boxes for mounting switches, switch socket, fan regulator, provision of number of modules as required on site or as directed by Engr -in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) as earth wire and connected to earth dolly including taking down old unserviceable point wiring complete all as specified and as directed for One light /one fan/one bell point controlled by one switch. |
| 92 | All as per item No 91 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 93 | All as per item No 91 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 94 | All as per item No 91 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 95 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 96 | S&F socket outlet multi 5 pins 6 amp complete all as specified and as directed. |
| 97 | S & F switch socket combination 2 in 1, 5A flush type complete all as specified and as directed. |
| 98 | S & F switch socket combination 3 pin 16A, flush type complete all as specified and directed. |
| 99 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 100 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 101 | S&F LED bulb 7W suitable for fixing in PVC angle holder complete all as specified and as directed. |
| 102 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 103 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 104 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 105 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 106 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and as directed. |
| 107 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core flat cable of size 16 sqmm complete all as specified and as directed. |
| 108 | S & F in replacement LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 110 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. |
| 111 | Supply and fixing in replacement Circular/Square (as per site Requirement) shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 113 | M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling and connecting and testing complete all as specified and as directed. |
| 114 | S&F heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and as directed. |
| 115 | S&F of heating element with new one capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and as directed. |
| 116 | S&F in repair thermostat 7''/9\\" suitable for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified. |
| 117 | Supply and fixing in replacement exhaust fan AC single phase, 1200 rpm 230/240V of size 250mm sweep with louvre heavy duty complete all as specified and as directed. |
| 118 | Supply and fix in replacement, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and as directed. |
| 119 | Supply and fix in replacement, water heater storage type, electric capacity 10 ltr along with all accessories BEE 5 star rated complete all as specified and as directed. |
| 120 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and as directed. Please Enable Macros to View BoQ information |
