|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK :REPAIRS TO CERTAIN ARTERIAL ROUTES, INTERNAL APPROACH PATH TO MD ACCN, KERB STONE, SIDE BERM, CULVERT ETC IN CHUNABHATTI AREA UNDER AGE B/R – I AT NAVAL STATION KARANJA CONTRACT AGREEMENT: CWE KJ(K)- OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Repairs to pot holes any depth not exceeding. 1sqm each including sweeping free form dust and mud or water and scoring sunken surfaces in roads, path etc cutting around edges atleast 25mm in depth making good by applying bitumen grade VG-10 as tack coat at 5Kg per 10 sqm, putting in premixed bituminous macadam with bitumen grade VG-30, well rammed and sealed with binder 9.80 Kg per 10 sqm binded with 0.09 cum of stone chippings, 6.3 mm size & again well rammed (including supply of premixed macadam, binder and chippings ) depth of pot holes exc 30mm, rolled with power road roller of 08 to 10 tone capacity, complete, all as specified & directed using paving bitumen complete all as specified and as directed. |
| 3 | Material and Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags removal of all loose dirt etc and applying evenly priming/ tack coat with bituminous primer using paving bitumen grade VG-10 @ 5kg/10sqm all as specified and as directed. |
| 4 | Material and Labour for laying bituminous premix semidense asphaltic concrete 40mm thick (consolidated thickness) with 5.5% binder content by weight of total mix, using paving bitumen of VG-30 grade, mixed in computerised Hot Mix Plant and spread by means of self propelled Mechanical Paver, rolled and compacted to required camber and gradient by using mechanical power road rolled 8 to 10 tonne capacity all as specified and directed.NOTE :- (i) The mix design shall be got done from approved lab and got approved from GE before commencement of work.(ii) In the event of variation in the mix design in the percentage of the binder content on minus side, the difference in quantity of binder content will be adjusted through supply only rate of Rs 36.0 per Kg of grade of VG-30 bitumen. However no adjustement shall be applicable is excess quantity of binder content is used/approved in the execution of work under this item. |
| 5 | Material and Labour for premix bituminous macadam, 75mm or less consolidated thickness by using paving bitumen VG-30 grade with binder content @ 4% by weight of total mix, laying with mechanical paver, rolled and compacted to required camber and gradient by using 8 to 10 tonne capacity power roller complete all as specified and directed. |
| 6 | Material and Labour Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and n. enx 50mm deep including removing of debris and stacking complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags removal of all loose dirt etc and applying evenly priming/ tack coat with bituminous primer using paving bitumen grade VG-10 @ 10kg/10sqm all as specified and as directed. |
| 8 | Material and Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 9 | Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed. |
| 10 | Material and Labour for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for receiving floor finish complete all as specified and as directed. |
| 11 | Material and Labour100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work . |
| 12 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 13 | Material and Labour for preparation of old brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10cm girth of width and applying one coat of synthetic enamel paint of any colour and pettern of all complete all as specified and as directed. |
| 14 | Material and Labour for preparation of new surface of concrete or brick or stone surfaces etc of any description exc 10 cm width or girth and over a coat of primer applying two coat of synthetic enamel paint complete all as specified and directed. |
| 15 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 16 | S&F in repair retro reflective raised pavement markers (cat eye) double sided lense reflector of size 100x100x20mm white/red/ yellow polycarbonate/ ABS plastic body including epoxy adhesive & drilling including nail of dia 12mm of length 120mm etc. and necessary fixing hardware of standard size, shape/ colour, body & lense complete all as specified and directed by Engr-in-Charge. |
| 17 | Supply and fixing in repairs of Solar delineator which has red blinker and charged by solar energy fitted on MS pipe of 80 mm dia 900 mm long dully powder coated, anti rust & anti theft steel net complete all as specified and directed by Engr-in-Charge.Make: Darkeye/3M/Suneyez or equivalent |
| 18 | Material and Labour forming construction joint 30mm deep x 10mm wide filled with sealing compound grade \\"A\\" complete all as specified and directed. |
| 19 | Material and Labour forming contraction(Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade \\"A\\" complete all as specified and directed. |
| 20 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 21 | Material and Labour for chequired cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties in yellow/ red colour pre-polished rubber moulded and set jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 22 | Material and Labour Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment compete all as specified and directed by Engr-in-Charge. |
| 23 | Material and Labour Sand filling under floors or in foundations incl watering and consolidation. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
