|
| 1 | M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dully including taking down point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors for one light /one fan/one bell point controlled by one switch complete all as specified and directed. |
| 2 | All as per item No 1 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 3 | All as per item No 1 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 4 | All as per item No 1 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 5 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 6 | S & F switch socket combination 2 in 1, 5A flush type complete all as specified and directed. |
| 7 | S & F switch socket combination 3 pin 16A, flush type, complete all as specified and directed. |
| 8 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 9 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 10 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 11 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 12 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 13 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 14 | S&F LED bulb 7W suitable for fixing in PVC angle holder complete all as specified and as directed by Engr-in-Charge. |
| 15 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 16 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 17 | S & F in repair distribution boards VTPN, 4 way, double door 415 volts 50 Hz, AC including fixing on suitable rectangular block complete all as specified and directed. |
| 18 | S & F in repair MCCB ,100 Amp, 4 Pole breaking capacity 16KA, 415 Volt, 50 Hz with sheet metal enclosure complete all as specified and directed. |
| 19 | S & F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 20 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 21 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and directed. |
| 22 | M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLSH, ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25 mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed. |
| 23 | S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 24 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 25 | Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as specified and directed. |
| 26 | Supply and fixing in replacement Circular/Square (as per site Requirement) shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 27 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 28 | S&F Bed side designer lamp, 5 watts, with LED lamp, including all wiring and switches required, with terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 29 | Supply and fix in replacement Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED 20W B22 base with 1x20 watt LED lamp complete all as specified and directed. |
| 30 | Supply and fix in replacement Decorative LED bollard light 9 watt 220 volt IP 65 height 2 to 4 feet aluminium made up of high grade material including LED and making connection complete all as specified and directed. |
| 31 | M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 250 mm to 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling and connecting and testing complete all as specified and directed. |
| 32 | S&F heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and directed. |
| 33 | S&F heating element with new one capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and directed. |
| 34 | S&F of Thermostat 7''/9\\" suitable for 25/50 ltrs capacity water geyser with automatic thermal cut out and including testing, complete all as specified and directed. |
| 35 | S&F of copper Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed. |
| 36 | S&F of SS inner tank suitable for 25 ltrs capacity water geyser complete all as specified and directed. |
| 37 | S&F of outer body suitable for 25 ltrs capacity water geyser complete all as specified and directed. |
| 38 | S&F of glass wool heat resistant suitable for 25 ltrs capacity water geyser complete all as specified and directed. |
| 39 | Supply and fixing in replacement Exhaust fan AC single phase, 1200 rpm 230/240V of size 250 mm sweep with louvre heavy duty complete all as specified and directed. |
| 40 | Supply and fix in replacement, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed. |
| 41 | Supply and fix in replacement, water heater storage type, electric capacity 10 ltr along with all accessories BEE 5 star rated complete all as specified and directed. |
| 42 | S&F Solar Street Light 12 Watts with solar panel, Application Lighting streets, boulevards, highways, yards, compounds, parks, boundary walls, car parking areas, Product Type Solar Street Light, Features Reliable, Energy efficient, Easy installation. No Lead, No Mercury and No Pollution., Rated Power 12 W, Country of Origin India complete all as specified and directed. |
| 43 | S&F inverter Rechargeable Led Batten with Elegant design offers high Brightness, Energy Saving, Size-4 ft,20W Inverter Led batten Upto 4 hrs Back up, Powerful lithium battery-5600 mah, Long battery life-500+ Recharge Cycle, Charging Time-8 hrs to 10 hrs complete all as specified and directed. |
| 44 | S&F Inverter bulb 18 Watt 230 volt 50 Hz Rechargeable, cool daylight (Colour temperature: 6500k) Power backup up to 4 hours continuously, With the automatic charging feature, with powerful Lithium-ion battery. complete all as specified and directed. |
| 45 | S&F Rovello 6W Rechargeable Table Lamp with a 360 degrees twisting and rotating gooseneck with 3 step dimming - Focus, Relax and Night modes. The Rovello Table Lamp sports a multipurpose base which acts like a pen holder as well as sports a unique mobile-holding groove. The Table Lamp is USB Rechargeable and comes with an inbuilt 2200 mAh Li-on battery that provides upto 10 hours of backup in Relax mode complete all as specified and directed. |
| 46 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed. |
| 47 | Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard soil and getting out, complete all as specified and directed. |
| 48 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed. |
| 49 | Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed. |
| 50 | Taking up or down steel tubing of 20 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed. |
| 51 | All as per description of ser item No-50 above but 25mm bore. |
| 52 | All as per description of ser item No-50 above but 40 mm bore. |
| 53 | All as per description of ser item No-50 above but 50 mm bore. |
| 54 | All as per description of ser item No-50 above but 80 mm bore. |
| 55 | S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge. |
| 56 | All as per description of ser item No-55 above but 25mm bore. |
| 57 | All as per description of ser item No-55 above but 40mm bore. |
| 58 | All as per description of ser item No-55 above but 50mm bore. |
| 59 | All as per description of ser item No-55 above but 80mm bore. |
| 60 | S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe or replace the existing and fixed of bore of 20 mm complete all as specified and directed. |
| 61 | All as per description of ser item No-60 above but 25mm bore. |
| 62 | All as per description of ser item No-60 above but 40mm bore. |
| 63 | All as per description of ser item No-60 above but 50mm bore. |
| 64 | All as per description of ser item No-60 above but 80mm bore. |
| 65 | M&L for Construction of brick masonry valve pit of size 600 x 600 x 600 mm (Internal dimensions of chamber from top of PCC to bottom of cover) including excavation in any type of soil returning, filling around foundation and removal of surplus soil to a distance not exceeding 50m PCC 1:4:8 type D2 in foundation brick work in cement mortar 1:6, 10mm thick plaster in cement mortar 1:4 to internal surface covered pit with MS sheet cover 3.15 mm thick with locking arrangement handle fixing arrangement and painting with oil paint two coat over a coat of red oxide primer complete all as specified and directed. |
| 66 | M&L for lagging to pipes used in water supply or plumbing all round with, 40 mm thick bounded mineral wool preformed 'SNAPON' pipe section of density 144 Kg/cum conforming is IS 9842. On pipe of internal dia 20 mm with chicken mesh wire netting 25 mm gauge,20mm mesh complete all as specified and directed. |
| 67 | All as per description of ser item No-66 above but 25mm. |
| 68 | S&F non-return valve heavy duty of size 80 mm bore, ISI Marked, flanged ends including suitable nut bolts, washers, packing sheet, etc complete with necessary arrangements for fixing complete all as specified and directed. |
| 69 | S&F non-return valve heavy duty of size 50 mm bore, ISI Marked, flanged ends including suitable nut bolts, washers, packing sheet, etc complete with necessary arrangements for fixing complete all as specified and directed. |
| 70 | Dewatering of sump by pump from clean water sump including Treatment of sump with U.V. radiation, the size and capacity (25000 to 50000Gln), and taking out sludge, removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing, including brooming down complete including white washing internally, complete all as specified and directed. |
| 71 | Calcium Hypochlorite 65% to 70% Chlorine content (Calcium based granular disinfectant for water treatment much more stronger than chlorine gas, and stronger than bleaching powder & sodium hypochlorite packed in 45 Kg drums complete all as specified and directed. |
| 72 | Taking out the water sample from bore well/natural spring and carry out the Lab test for all parameters as per Indian standard drinking water specifications (BIS-10500:1991) from Govt approved lab complete all as specified and directed. |
| 73 | M&L Dosing system contains following parts: -(i) Preparation tank. (ii) Service Tank. (iii) Pipe line 25mm. (Pipeline is fitted from preparation tank to service tank. It contains following part:- (a) Valves (b) Y-strainer (c) Union (d) FTA (e) MTA (f) Elbow etc.) (iv) Shaft and Impeller. (v) Motor 2 pieces. (vi) Dosing Injector (Digital) complete all as specified and directed. |
| 74 | S&F Centrifugal Monoblock pump set head 30 meter, 3.6 LPS, 50x40 mm including single phase 230 volt,50 Hz electric motor of 2 HP capacity complete all as specified and directed. |
| 75 | S&F Centrifugal Monoblock pump set, head 68meter 80x80 mm including three phase 415 volt,50 Hz, electric motor of 30 HP capacity complete all as specified and directed. |
| 76 | Disconnecting and taking out unserviceable 3 phase electric motor of 5 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed. |
| 77 | S&F submersible pump set, head 90 meter, including three phase 415 volt, 50 Hz, electric motor of 20 HP capacity complete all as specified and directed. |
| 78 | M&L for disconnecting and taking out unserviceable 3 phase electric motor of 15- 20 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed. |
| 79 | M&L for disconnecting and taking out unserviceable 3 phase electric motor of 30 HP capacity, taking to work shop, dismantling carefully, cutting out burnt out windings, cleaning the slots. And rewinding with super enamelled copper winding wire of appropriate gauge and weight including all insulating materials, varnishing, drying, heating etc, and reassembling, transportation to site and refixing at original position and testing complete all as specified and directed. |
| 80 | M&L for repair to Centrifugal pump set of capacity 15-20 HP by replacing worn out impellers - 01 set, with bronze impellers, bearings - 02 Nos, bearing housing, gland bush, gland cups, unserviceable nuts, bolts, washers, etc complete all as specified and directed. |
| 81 | M&L for repair to Centrifugal pump set of capacity 30 HP by replacing worn out impellers - 01 set, with bronze impellers, bearings - 02 Nos, bearing housing, gland bush, gland cups, unserviceable nuts, bolts, washers, etc complete all as specified and directed. |
| 82 | S & F (after testing at site) fully automatic star delta starter for 15 HP motor /submersible pump provide with protection degree IP 54, Extended wide band coil, Starter type Air Break, FRLSH internal Wiring Over load relay Range 8.0A to 12 A. complete all as specified and directed. |
| 83 | S & F manually operated Direct On line oil immersed starter (Heavy duty) ISI Marked suitable for 20 HP motor 3 phase 415 Volt AC 50 Hz complete all as specified and directed. |
| 84 | M&L for repair the spot leakage on the inner wall of Water Sump (25000 to 50000Gln) capacity by scrapping, filling water proof compound, including making good complete all as specified and directed. |
| 85 | S&F in replacement of manually operated Direct On line oil immersed starter (Heavy duty) ISI Marked suitable for 30 HP motor 3 phase 415 Volt AC 50 Hz complete all as specified and directed. |
| 86 | Supply and fixing in replacement foot valve of size 80mm complete all as specified and directed. |
| 87 | Supply and fixing in replacement foot valve of size 50 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
| 88 | Supply and fixing in replacement foot valve of size 50 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
