|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK : CERTAIN REPAIR TO FLOORING, DIAPHRAGM WALLS, DRAINS, DRAIN COVER, COPING AND OTHER MISC B/R WORKS AT AMN JETTY, BOAT POOL, SECURITY WATCH TOWERS, DNPM OFFICE AND VARIOUS BLDGS OF AMN JETTY AT NAVAL STATION KARANJA. CONTRACT AGREEMENT: CWE KJ(K) - OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Note :- These item are to be execured in galleries of jetty (Restricted Work Environment arrise during High tide ). The Rate quoted shall be accordingly considered for deemed to be include scaffolding , mobilization equipment and other safety equipment as work will be carried out in sea area along the Jetty. Nothing will be paid extra on account of Working in difficult area. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Demolition of RCC as in slab, beam, chajja, old water tank (other than ground floor) beams staircases, and similar all as specified and directed by Engr-in-Charge. |
| 5 | Material and labour for cement concrete type D-2 1:4:8 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc as specified and directed. |
| 6 | Material and labour for 100mm thick cement concrete type B-2 1:2:4 using 20mm graded crushed stone aggregate as in path/floor finished fair even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each including bitumen filling in joints complete all as specified and as directed by Engr-in-Charge. |
| 7 | Material and Labour for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner) as per manfacutre's instruction, as specified laid on concrete floors and pavings and path, and finished even and smooth (except metallic hardner) all as specified and directed by Engr-in-Charge. (Note metallic hardender & glass strips area measured and paid separately). |
| 8 | Supply only 22 mm wide and 3 mm thick glass dividing strips as laid in floor all as specified and directed by Engr-in-Charge. |
| 9 | Supply on metallic hardner mix with cement concrete as per manufacture instruction all as directed by Engr-in-Charge. Make : DR. FIXIT PIDE PROOF LW, FOSROC |
| 10 | Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC complete all as specified and directed |
| 11 | Material and labour for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes including dismantling of old tiles complete all as specified and directed. |
| 12 | Material and labour for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes including dismantling of old tiles complete all as specified and directed. |
| 13 | Material and Labour for non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including dismantling of old tiles complete all as specified and as directed. |
| 14 | Material and Labour for non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting/dado over 10 mm thick cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including dismantling of old tiles complete all as specified and as directed. |
| 15 | Material and Labour for vitrified light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding ).36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in Cement Mortar 1:6 including dismantling of old tiles complete all as specified and directed by Engr-in-charge |
| 16 | Material and Labour for vitrified light shade tiles 8 to 10mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 10mm thick rendering in cement mortar 1:3 including dismantling of old tiles complete all as specified and directed. |
| 17 | Material and Labour for vitrified light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in Cement Mortar 1:6 including dismantling of old tiles complete all as specified and directed by Engr-in-charge |
| 18 | Material and Labour for vitrified light shade tiles 8 to 10mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 10mm thick rendering in cement mortar 1:3 including dismantling of old tiles complete all as specified and directed. |
| 19 | Material and labour for Glazed ceramic coloured tiles in vertical surface 300x450x7mm mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl over and including 10 mm thick rendering or bedding layer in cement mortar 1:3 including dismantling of old tiles complete all as specified and directed |
| 20 | Material and Labour for glazed ceramic coloured digital tiles of size 300x600x7mm Size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface etc including dismantling of old tile all as specified and as directed by Engr-in-Charge. Note:- Desinger concept tiles matching with existing tiles. |
| 21 | Material and Labour for matt finish ceramic coloured Elevation wall tiles in vertical surfaces 300mm*600mmx9-10mm thick set and jointed in cement slurry including rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:3 including dismantling of old tiles complete all as specified and directed by Engr-in-charge. Note :- Design/Pattern of Tile should be approved by Engr-in-charge |
| 22 | Material and Labour for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface etc including dismantling of old tile all as specified and as directed by Engr-in-Charge |
| 23 | Material and labour for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed |
| 24 | Material and Labour for chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over cement screed bed 20mm thick cement motor 1:6 including taking down old tile/slab all as specified and as directed by Engr-in-charge. |
| 25 | Material and Labour for sand filling under paver blocks including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed. |
| 26 | Material and Labour for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement & pigment including taking down old Interlocking tile/slab complete all as specified and directed. |
| 27 | Material and Labour for machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement with pigment including taking down old Interlocking tile/slab complete all as specified and directed. |
| 28 | Material and Labour for taking out old existing interlocking paver blocks any thickness, size & type from the existing location including snad dust, stacking properly the serviceable tiles for reuse; removal of the unserviceable materials & disposal to low lying areas at a distance not exceeding 250m and relaying the paver blocks by providing 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [NOTE: The quoted rate is deemed to include for coarse sand & dust as required at site.] |
| 29 | Material and Labour for PCC (1:2:4) type B0 (using 12.5mm graded aggregate) in coping bed black etc including nessesary form work complete all as specified and directed. |
| 30 | Demolition of pre-cast concrete block walling , built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. -ditto all as per srl item No. 1 above but pre-cast concrete block walling complete all as specified and directed. |
| 31 | Material and Labour for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type C1 (1:3:6) (20mm graged stone aggregate )and setting in mortar (1:6) including demolition of old PCC Block complete all as specified and as directed |
| 32 | All as per srl item No. 29 here in before but except Pre Cast Cement Concrete Block Note:- Serviceable PCC Block obatined from srl item No. 28 shall be re-used in srl item No. 30 after cleaning etc complete all as specified and directed by Engr-in-Charge. |
| 33 | Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 34 | Material and Labour for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 including demolition of old brick work complete all as specified and directed |
| 35 | All as per srl item No. 32 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 31 shall be re-used in srl item No. 33 after cleaning etc complete all as specified and directed by Engr-in-Charge. |
| 36 | Material and Labour for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 Including demolition of Old Stone masonary all as specified and directed. |
| 37 | -Ditto- all as per item No. 35 hereinbefore but except stone. Note:- stone obtained from item No 31 shall be reused. |
| 38 | Supply and Fixing of precast cement concrete louvres and jallies, 25mm thick (mea sured solid) made of Type B0 (1:2:4) 12.5mm graded stone aggreate , including fixing in in cement mortar 1:4 including dismantling of old Louvers and Jallies Complete all as specified and directed |
| 39 | Material and labour for RCC retaining wall / drain side wall using reinforced ready mixed cement concrete M-30 (design mix) using 20mm graded stone aggregate transprted at site using transit mixer and pumped suitably using line / boom pump in position complete all as specified and directed. |
| 40 | Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 41 | Mild Steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 42 | Use and waste type of formwork to sides of walls of RCC drain /Diapharm wall and similar works for rough finished flat surface of drain complete all as specified and directed. |
| 43 | Use and waste type of formwork to sides of walls of RCC drain /Diapharm wall and similar works for fair finish surface of drain complete all as specified and directed. |
| 44 | Use and waste of formwork to edges of concrete flats,floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat surface complete all as specified and directed. |
| 45 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified. |
| 46 | Racking out joints/ pointing of cement / cement lime mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed. |
| 47 | Material and Labour for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed. |
| 48 | Material and Labour for rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete surfaces with two coats i.e (10 mm thick backing coat and 5mm thick finishing coat) , finished even and smooth complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 49 | Material and labour for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 50 | Material and labour for preparation of new plastered surfaces of walls and applying applying two coats of oil bound distemper over over 1mm thick wall care putty on plastered surfaces complete all as specified and directed. |
| 51 | Material and Labour for preparation of old plastered surfaces of walls and applying one coat of acrylic antifungal paint exterior grade paint plain or camouflage pattern upto 4 storey including necessary scaffolding complete all as specified and as directed by Engr-in-Charge. Note:- work shall be carried out on the pillar below the bridge in marine area. Unit rate shall also include quoted by the contractor (non accessible roof/ceiling). |
| 52 | Material and Labour for preparation of new or previously untreated plastered surfaces of walls/Ceiling and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed. |
| 53 | Material and Labour for preparation of new or previously untreated plastered surfaces of walls/Ceiling and applying two coats of acrylic antifungal paint exterior grade paint CAMOUFLAGE PATTERN on one coat of primer complete all as specified and as directed. |
| 54 | Supply and fixing of fiber glass reinforced plastic cover Slabs 600x600x40mm made from a compostie material of polyester resign and glass fibers with load carrying capacity of 2.5Tonnes. Cover slab shall be embossed MES on upper side Complete all as specified and dicted by Engr-in-chsrge . Make :- Bharat FRP Pune /Nexgen |
| 55 | Supply and fixing of fiber glass reinforced plastic cover Slabs 1200x600x40mm made from a compostie material of polyester resign and glass fibers with load carrying capacity of 2.5Tonnes. Cover slab shall be embossed MES on upper side Complete all as specified and dicted by Engr-in-chsrge . Make :- Bharat FRP Pune /Nexgen |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge. |
| 57 | Material and Labour for Framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and fencing angle similar work conforming to Fe-290 Gde E-165 |
| 58 | Supply and Fix MS plate Fe 410-W (Gde E-250 quality A) (Plain/Chequered) 5 mm and over as open drain covers with 02 Nos of 150mm handle in each plate etc complete all as specified and directed by Engr-in-Charge. |
| 59 | Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engr-in-Charge. |
| 60 | Material and Labour for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 61 | Material and Labour for preparation of old steel surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and Fix Steel rolling shutters, with out ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and erected in position as indicated,complete: push pull or manual type including taking down of old Shutter complete all as specified and directed by Engr-in-Charge |
| 63 | Material and Labour for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed. |
| 64 | Material and Labour for preparing old painted steel surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed Total in Figures 0.0 23 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
