|
| 1 | Excavation in soft/loose soil trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out incl old U/s cable cover of ant type, taking out/laying/cleaning/repairing of CI/GI pipe line, cable etc including making good to disturbed surfaces, complete all as specified and directed. |
| 2 | Returning, filling in & including spreading, levelling & well ramming in layers not exceeding 25 cm thick as in soft/loose soil, complete all as specified and directed. |
| 3 | Removal of surplus spoil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground level, complete all as specified and directed. |
| 4 | Excavation in hard standing for crossing the road as per the authorized width for taking out/laying/cleaning/repairing of CI/GI pipe lines all as directed including making good the road cut to match with the existing surface either with bituminous macadam or with PCC 1:2:4, type B-2(using 40mm graded crushed stone aggregate), complete all as specified and directed. |
| 5 | Taking up unserviceable CI/DI/GI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead, complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).(a) 150mm bore dia |
| 6 | (b) All as per item No 5 above but, 100mm bore dia. |
| 7 | Laying only in trenches CI/DI/GI pipe with spigot and socketed ends complete after cleaning properly/thoroughly & removal of all blockage removing all silt and deposited organics inside using bamboo or rod with brush, complete all as specified and directed for the following sizes/bore of pipes :-(a) 150mm bore dia |
| 8 | (b) All as per item No 6 above but, 100mm bore dia |
| 9 | Supply & laying in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class 'K-7' in any length laid in trenches, complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-(a) 150mm bore dia |
| 10 | (b) All as per item No 7 above but, 100mm bore dia |
| 11 | M&L for cutting of the CI/DI/GI pipe upto 150 mm dia in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes, complete all as specified and directed. |
| 12 | M&L for rubber gasket joint suitable for DI pipe and fittings with size of nuts, washer & bolts etc, complete all as specified and directed for the following sizes :- (a) 150 mm bore |
| 13 | (b) All as per item No 9 above but, 100 mm bore |
| 14 | M&L for upto 100mm bore cast iron (DI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and directed. |
| 15 | Taking up or down steel water tubing and connections including clearing the pipes free from scaling for reusing the same, complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately.(a) 80 mm dia bore |
| 16 | (b) All as per item No 11 above but, 50mm dia bore |
| 17 | (c) All as per item No 11 above but, 40mm dia bore |
| 18 | (d) All as per item No 11 above but, 25 mm dia bore |
| 19 | (e) All as per item No 11 above but, 20 mm dia bore |
| 20 | (f) All as per item No 11 above but, 15 mm dia bore |
| 21 | Relaying/ refixing of old steel tubing and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc, complete all as specified and directed.(a) 80 mm dia bore |
| 22 | (b) All as per item No 12 above but, 50mm dia bore |
| 23 | (c) All as per item No 12 above but, 40mm dia bore |
| 24 | (d) All as per item No 12 above but, 25 mm dia bore |
| 25 | (e) All as per item No 12 above but, 20 mm dia bore |
| 26 | (f) All as per item No 12 above but, 15 mm dia bore |
| 27 | Supply and lay steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc, complete for the following sizes:- Make: Jindal/Prakash/Swastik Note :- Excavation and earth work will be measured and paid separately.(a) 80 mm dia bore |
| 28 | (b) All as per item No 13 above but, 50mm dia bore |
| 29 | (c) All as per item No 13 above but, 40mm dia bore |
| 30 | (d) All as per item No 13 above but, 25 mm dia bore |
| 31 | (e) All as per item No 13 above but, 20 mm dia bore |
| 32 | (f) All as per item No 13 above but, 15 mm dia bore |
| 33 | S&F Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes and fixed for the following sizes including taking down of unserviceable gate valves, complete all as specified and directed. Make : Zoloto/Seico/Jindal/Upadhaya/Venus.(a) 50mm bore |
| 34 | (b) All as per item No 14 above but, 40mm bore |
| 35 | (c) All as per item No 14 above but, 25mm bore |
| 36 | (d) All as per item No 14 above but, 20mm bore |
| 37 | (e) All as per item No 14 above but, 15mm bore |
| 38 | S&F 15mm dia bib tap brass or cast copper alloy with crutch handle screwed down screwed for iron pipe including taking out unserviceable tape of 15mm dia, complete all as specified and directed. |
| 39 | Supply, fixing, jointing and testing in repair of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed for following bore of CI pipe line :-(a) 150mm dia bore |
| 40 | (b) All as per item No 16 above but, 100mm dia bore |
| 41 | Supply, fixing, jointing and testing of cast iron non return valve flanged ends as per IS-5312 (ISI Marked) complete with washer nuts/ bolts and rubber gasket complete including taking down unserviceable non return valve with provided company test certificate /Quality assurance certificate, complete all as specified and directed for following bore of CI pipe line.Make : Zoloto/Kirloskar/Leader.(a) 150mm bore dia |
| 42 | (b) All as per item No 17 above but, 100mm bore dia |
| 43 | Dismantling old broken / damaged valve pit chamber of size 1050mm x 1050mm x 1050mm (internal dimention) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 44 | All as per item No 18 above but size of valve chamber is 900 x 900 x 900 mm (internal), complete all as specified and directed. |
| 45 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material Please Enable Macros to View BoQ information |
