Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified, including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed and specified. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified, Including Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed and specified. |
| 3 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed. M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortal 1:4 complete all as directed and specified. |
| 4 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as directed and specified. |
| 5 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 6 | S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with, with inlet, ball valve, float and handle including brackets complete all as directed and specified. |
| 7 | S&F in repair vitreous China squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete including provision of cement concrete bedding complete all as directed and specified. |
| 8 | S&F in repair Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as directed and specified. |
| 9 | S&F in repair Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as directed and specified. |
| 10 | S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed. |
| 11 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as directed and specified. |
| 12 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as directed and specified. |
| 13 | S&F in repair swivel shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as directed and specified. |
| 14 | S&F one peace vitrified China wash down water closet pan pedestal pattern integrated flush tank white or coloured include p or s trap etc complete all as directed and specified. |
| 15 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep in any type of soil and getting out in soft/loose soil complete all as directed and specified. |
| 16 | M & for PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as directed and specified. |
| 17 | M&L for returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 18 | M&L for removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 19 | M&L for cutting into existing manholes for Internal dia of Pipe 150 mm dia pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and directed. |
| 20 | S&F in repairs health faucet (hand shower) chromium plated complete all as specified and as directed. |
| 21 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets complete all as directed and specified. |
| 22 | M&L 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coat of melamine polish including sanding/filler repair /sealer coat complete all as directed and specified. Note-: frame work shall be measured and paid separately. |
| 23 | M&L for plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling /wall complete all as directed and specified. |
| 24 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth complete all as directed and specified. |
| 25 | M&L for preparation of previously treated surfaces/old surface of wall and applying one coat cement base paint on old surface of wall complete all as directed and specified. |
| 26 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 27 | M&L 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even including taking down cement or cement lime plaster, of any description on brick or stone walls etc complete all as directed and specified. |
| 28 | M&L for 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even including taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed and specified. |
| 29 | M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement, including taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed and specified. |
| 30 | M&L for providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m openable length ( total length 90m) having 50 nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick 0 and weight 43.478 gm/metre complete all as directed and specified. Note:- Cost of M.S. angle, CC Blocks shall be paid separately. |
| 31 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. and in any mortar complete all as directed and specified. |
| 32 | M&L for 20 cm x 20cm x 25 mm thick Chequered cement concrete tiles (in any colour & shape), set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over 20 mm screed bed in CM 1:6 complete all as specified & directed. |
| 33 | S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with two nos tank nipples inlet and outlet including dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing to stores complete all as specified & directed. |
| 34 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as directed and specified. |
| 35 | M&L for 75mm thick plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base floor complete all as directed and specified. |
| 36 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as directed and specified. |
| 37 | M&L for hardcore of gauge (broken bricks) n exc 63mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface with gauze broken boulder exc 90 cm complete all as directed and specified. |
| 38 | M&L second class softwood as in scantling clean sawn fixed in position with nails unframed work complete all as directed and specified. |
| 39 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as directed and specified. |
| 40 | S&F for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 41 | S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and directed. |
| 42 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 43 | Taking up or down 20mm dia GI steel tubing and connections complete all as specified and as directed. |
| 44 | S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 45 | S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. |
| 46 | M&L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as directed and specified. |
| 47 | M&L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as directed and specified. |
| 48 | S&F 110 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc or laid in trenches, in floors including dismantling AC Pipe/PVC Pipes complete all as specified and directed. |
| 49 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed and specified. |
| 50 | M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay) heavy, for large gates: hook and pintle hinges: large hasp and staples:chains:hand made sliding bolts: clamps: hold fasts: wall ties: hooks for hanging fans: plain angle cleats for securing purlins to trusses or rafters: knee piece inserts: two way and three way straps, plate washers and similar small articles confirming to Fe 290,Gde-E-165 complete all as directed and specified. |
| 51 | M&L for mild steel work posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as directed and specified. |
| 52 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed. |
| 53 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed. |
| 54 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed. |
| 55 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 56 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified |
| 57 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as directed and specified. |
| 58 | Demolition cement concrete (reinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials complete all as directed and specified. |
| 59 | Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 Sqm each complete all as directed and specified. |
| 60 | Taking down chowkhat with shutter without taking off shutter from the frame n exc 1.5 Sqm each complete all as directed and specified. |
| 61 | S&F extruded aluminium alloy with galvanised mild steel hinge pin Butt hinges 100mm long type B1 complete all as directed and specified. |
| 62 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long |
| 63 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 100mm long complete all as directed and specified. |
| 64 | S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as directed and specified. |
| 65 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality conforming to FE-410-s or FE 410-0 complete all as directed and specified. |
| 66 | All as per item No-65 above but 6 to 8 mm dia bars as in stirrups/ spacers. |
| 67 | Excavation in post hole each n. exc 0.50 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering and removing surplus soil to a distance n. exc 50m and making good surfaces in soft/loose soil complete all as directed and specified. |
| 68 | M&L for PCC (1:3:6) type C-2 as in foundation filling and mass concrete for MS angle posts complete all as directed and specified. |
| 69 | Dismantling fencing wire mass any type complete all as directed and specified. |
| 70 | Fixing Only chain Link Fencing Including Line wire any Mesh Size and type to any type of standard rails straining bolts etc including provision of binding wire complete all as directed and specified. |
| 71 | Supply only chain link MS galvanised fencing, any size or type complete all as directed and specified. |
| 72 | Dismantling of old barbed wire etc complete all as directed and specified. |
| 73 | S&F in repairs GI 2 standard steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stranded rails, straining bolts including securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc complete all as directed and specified. Note:- Each line of wire to be measured. |
| 74 | M&L for mild steel bars 10mm dia Round and plain Bars and over cut to length bent to shape required including cranking bending for Support of Chain Link fencing including nut and bolt Fe-410-W) (Gde.E-250) Part- I quality-A complete all as directed and specified. |
| 75 | M & L for plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as directed and specified. |
| 76 | Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete, using extra cement including forms/moulds/mitred stopped ends etc complete all as directed and specified. |
| 77 | M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as directed and specified. |
| 78 | M&L for precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortar (1:4) complete all as specified and directed. |
| 79 | S&F for 75mm to 90 mm thick Steel Fibre Reinforced (SFRC) cover with iron frames (Light duty) complying to the standard specifications as mentioned in the IS 12592 BIS standard, minimum load bearing capacity 2.5 ton, in square, rectangular or circular shape complete all as specified and directed. |
| 80 | M & L cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed copings, packing around interlocking paver. and fixing of Y angle section complete all as directed and specified. |
| 81 | M&L for preparation of old steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as directed and specified. |
| 82 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified. |
| 83 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as directed and specified. |
| 84 | M & L for RCC pipes 200mm bore class NP2 laid in trenches and jointed complete with collars complete all as directed and specified. |
| 85 | M & L for concrete bed 1:4:8 type D2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for bore 200mm NP2 pipes complete all as directed and specified. |
| 86 | Taking down of shutter exc 1 sq. m and n exc 2 sq. m each complete all as directed and specified. |
| 87 | Taking down of shutter nexc 1 sq. m each complete all as directed and specified. |
| 88 | S&F 35 mm thick plain framed, panelled shutter (any number of panel) of 2nd class softwood with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as directed and specified. |
| 89 | S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneer with lipping/frame to match commercial type on both sides complete all as specified and directed. |
| 90 | M&L 35 mm thick Glazed and skeleton shutters, of 2nd class softwood for open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beds, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as directed and specified. |
| 91 | M&L 30 mm thick glazed and skeleton shutters, for windows open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as directed and specified. |
| 92 | M&L plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed and specified. |
| 93 | S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as directed and specified. |
| 94 | S&F extruded aluminium alloy with galvanised mild steel hinge pin Butt hinges 75mm long type C-21complete all as directed and specified. |
| 95 | S&F MS pressed bow handle of 150m size oval type stove enamelled black complete all as directed and specified. |
| 96 | S&F mild steel, 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as directed and specified. |
| 97 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and including minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as directed and specified. |
| 98 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed. |
| 99 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and as directed. |
| 100 | S & F in repair aluminium panelled door single leaf with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of section size 62.5mm x 37mm x 1.5mm thick, shutter with middle and bottom rail of aluminium section 112.5mm x 37mm x 1.5mm thick and stiles and top rails of aluminium section 83mm x 37mm x 1.5mm thick with suitable locking arrangement with lock (Make: Godrej / Link) 7 levers and self closing devices with rebates including joining cleats of suitable section for fixing and including provision of builders hardware fittings such as hinges, tower bolts, handles etc, and glazing with 5.5mm thick ordinary plain coloured glass including provision of EPDM rubber / neoprene gasket as required, including provision of necessary fittings, fixtures etc., complete all as specified and directed. |
| 101 | S & F in repair aluminium sliding window with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of aluminium section 62.5mm x 37mm x 1.5mm thick with shutters having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handle etc., including 5.5 mm thick coloured glass, complete all as specified and directed. |
| 102 | S & F in repair Aluminium hung type window/ventilator with powder coated aluminium (minimum thickness of powder coating 50 micron) frame of aluminium section 62.5mm x 37mm x 1.5mm thick with shutters having style and rails of aluminium section 47.62mm x 44.45mm x 1.5mm thick including joining cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handle etc., including 5.5 mm thick sheet glass complete all as specified and directed. |
| 103 | M & L for 15mm thick toughened glass frosted type as in hinged doors with polished edges, conforming to IS 2553 (Part 1): 2018. Glass shall be factory-prepared with necessary cut-outs for hardware, and installed with approved patch fittings/floor spring/locks including Solar control film 25micron reflective type complete all as specified and directed. |
| 104 | S&F in repair door closer heroically regulated Aluminium (extruded section body) designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed |
| 105 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 106 | M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of polishing over one coat of sealer after preparation of the surface, complete all as specified and as directed including dismantling of wall and ceiling boards or insulation boards/slabs/blankets complete all as directed and specified. Note: Framework shall be measured and paid separately. |
| 107 | S&F in repair plywood grade BWR type BB, 9mm thick fixed with nails to timber frame work in wall/ ceiling complete all as specified and directed |
| 108 | S&F in repair Veneered decorative plywood, 9mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling/wall complete all as directed and specified. |
| 109 | S&F in repair PVC panelling for wall/ceiling complete all as specified and as directed (as per sample kept in the office of AGE) complete all as directed and specified. |
| 110 | M&L 2nd class softwood clean swan 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed including dismantling one way Trellis work (Jafri), including dismantling trellis work, taking as under of battens in trellis (posts and rails measured separately complete all as specified and directed. |
| 111 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 112 | M&L walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in CM 1:4 including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed. |
| 113 | M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as directed and specified. |
| 114 | M&L rendering 10 mm thick in CM 1:6 on brick work or concrete surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as directed and specified. |
| 115 | M&L for preparation of new plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 116 | M&L for preparing old decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on wall/ceiling surface complete all as specified and directed. |
| 117 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & including P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed |
| 118 | S & F in repair 15mm dia concealed stop valve/angle valve of copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as directed and specified. |
| 119 | S & F in repair vitreous China wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 120 | Supply & fixing in repair in position, 6 mm thick E board (classic) of size 610x610 mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25 mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI 6 mm adjustable suspender of required length of any description complete all as specified and directed. Note : The design and specification of the ceiling board to be approved by GE. |
| 121 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed on wall with PVC rawl & cadmium plated brass screws complete all as specified & directed |
| 122 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx 160mm complete all as directed and specified. |
| 123 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed and specified. |
| 124 | S&F in repairs 1000 ltrs Rotational Moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as directed and specified. |
| 125 | S& fixing in repair ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as directed and specified. |
| 126 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed and specified. |
| 127 | S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as directed and specified. |
| 128 | S&F in repair Grating doom 125 mm dia with waste hole of Stainless steel (Min wt 20 gms) complete all as directed and specified. |
| 129 | S&F in repairs cabinet mirror of size 450mm x 350mm made with 5mm thick PVC sheet, coloured or white and fixed to wall complete all as specified and as directed. |
| 130 | S & F in repair Brass CP mixer for Sink (swan neck pattern) for mixing hot & cold water screwed down for iron pipe complete all as directed and specified. |
| 131 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 132 | S&F in repairs wall mixer, 15 mm bore with telephonic shower arrangement chromium plated, screwed down for galvanised iron pipes, complete all as specified and directed. |
| 133 | S&F 75 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc or laid in trenches, in floors including dismantling AC Pipe/PVC Pipes complete all as specified and directed. |
| 134 | S&F 75mm bore PVC (SWR) bends diminishing pieces or tapers with access doors etc, complete all as specified and directed. |
| 135 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm pipe complete all as directed and specified. |
| 136 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm pipe complete all as directed and specified. |
| 137 | M&L for mild steel roof trusses (framed), Fe 410 -W (GdeE- 250) quality-A /square of hollow section trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including one shop coat of primer complete all as specified and directed |
| 138 | S&F mild steel frame work for such as grills, grating etc, with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, frame balusters, walk ways, railing, frame work or water tanks & similar work conforming to Fe-290 Gde E-165 complete all as directed and specified. |
| 139 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in floor complete all as directed and specified. |
| 140 | M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but n. exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 141 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 142 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. |
| 143 | M&L 50 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in floor subbase, plinth protection finished even and fair without using extra cement complete all as directed and specified. |
| 144 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface (rectangular/square) polished, area of each tiles exc .36 sqm but not exceeding 1.00 sqm 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as directed and specified. |
| 145 | M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stonewall surface for laying dado/skirting including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as directed and specified. |
| 146 | M & L applying one coats of synthetic enamel paint on old wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete. |
| 147 | S&F in repair 20mm thick 2nd class softwood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding in ceiling complete all as directed and specified. |
| 148 | M & L for Curtain rods of mild steel, chromium plated with fixing brackets, stops, etc complete all as directed and specified. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail