Tender For Provn Of Toilet And Bathroom Block At 427 And Special Repair To Bldg No P-1 At 274 At Tezu Under Ge (P) Lohitpur
Tender Value
31 Lakhs
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lohit → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet And Bathroom Block At 427 And Special Repair To Bldg No P-1 At 274 At Tezu Under Ge (P) Lohitpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jun-2026 | Revised BOQ | BOQ | 25-Jun-2026 |
| 2 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Roughening surfaces of old concrete floor/terrace by picking including taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 1000 m.all as directed. |
| 2 | Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and as directed. |
| 3 | Supply and fixed 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane upto three storey of bldgs |
| 4 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 5 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 6 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. but cement or cement lime plaster,any description complete all as specified and directed |
| 7 | Material and labour for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 8 | M & L for machine cut Kota stone slab flooring 20 to 25 mm thick over cement screed bed of 20 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 9 | Material and labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick backing coat in cement mortar 1:3 and jointed with complete all as specified and directed. |
| 10 | Material and labour for rendering 15mm thick in two layer (10+5) mm in cement mortar 1:4 top coat mix with WPC on brick work or concrete surface of walls finished fair and even complete all as specified and as directed.Note :- WPC will be measured separately. |
| 11 | Material and labour for rendering 15mm thick in two layer (10+5) mm in cement mortar 1:3 top coat mix with WPC on brick work or concrete surface of wall finished fair and even complete all as specified and as directed.Note :- WPC will be measured separately. |
| 12 | Supply only integral loquid water proofing compound complete all as specified and directed complete all as specified and directed. |
| 13 | Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection, finish even & smooth without using extra cement complete all as specified and directed. |
| 14 | Material and labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing (Grade A) Compound complete all as specified and directed. |
| 15 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and as directed. |
| 16 | Material and labour for preparing the old plastered surfaces and applying one coat of old decorateed surface and two coats of subsequent coat of white wash on walls all as specified and direcrted. |
| 17 | Material and labour for preparing the old plastered surfaces of celling and applying one coat of undecorated surface and two coats subsequent coat white wash on celling complete all as specified and directed. |
| 18 | Material and labour for preparing the new plastered surfaces on wall and applying two coats of cement base paint on a walls complete all as specified and directed. |
| 19 | Material and labour for preparing the old plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed. |
| 20 | M &L for Non asbestos fibrecement buildingboards 4 mm thick of size 600mm x 600mm fixed orlaid/ inserted to timber/ GI/ Aluminium frameworkwith screwcomplete all as specified and directed. |
| 21 | Supply and fixed Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm for celling with Gl frame work for seamless ceiling comprising of G l perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners wit mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 22 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 10 mm thick cement plaster in CM (1:4) using water proofing compound @ 3 % by weight of cement for filling depression if any to receive water proofing treatment and providing APP modified bituminous membrane water proofing membrane with polyester reinforcement and plain finish of 4 mm thick (not less than 5 kg/sqm ± 5% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25 C, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints including for applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed by Engineer-In-charge (Note : WPC shall be measured and paid separately) |
| 23 | Material and labour for 40mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in slab flooring bedded, and jointed in cement mortar CM 1:6 and pointed in cm 1:3 finish even & smooth without using extra cement all as specified and directed. |
| 24 | Material and labour for 25 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in slab flooring finish even & smooth without using extra cement all as specified and directed. |
| 25 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge. |
| 26 | Material and labour Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls built in in cement mortar 1:4 complete all as specified and as directed. |
| 27 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil. |
| 28 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out in soft/loose soil. |
| 29 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm. Soft/loose soil. |
| 30 | Removing excavated material not exceeding 50 m and depositing where directed at a level n exc. 1.5m above the starting poin soft/loose soil. |
| 31 | Material and labour for cement concrete in foundation, filling and mass concrete in 1:4:8 type C-2 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 32 | Material and labour for cement concrete 1:2:4 type B0 (12.5 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 4028, water troughs and the like including weathering, slightly rounded or chamfered angle and throating, and including necessary formwork complete all as specified and as directed. |
| 33 | Material and labour for RCC design mix M25 (using 20 mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams ,plinth beam ,bases for column; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 34 | Material and labour for RCC design mix M25 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 35 | Material and labour for RCC design mix M25 (using 20 mm graded crushed stone aggregate) as in Beams, Cantilever, Lintel above 1.5m complete all as specified and as directed. |
| 36 | Material and labour for RCC design mix M25 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts complete all as specified and as directed. |
| 37 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqired including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips |
| 38 | Material and labour for Mild steel TMT bars 8 mm dia , cut to length, bent to shape reqired including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips . |
| 39 | Material and labour for for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 40 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. Rough finished surfaces of concrete flat. |
| 41 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mmthick (Horizontal or sloping) Rough finished surfaces of concrete flat. |
| 42 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Rough finished surfaces of concrete flat. |
| 43 | Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished surfaces of concrete flat complete all as specified and as directed. |
| 44 | Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide flat. |
| 45 | Supply and fixed Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 46 | Supply and fixed factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing complete all as specified and as directed. |
| 47 | Supply and fixed Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 48 | Supply and fixed Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 49 | Supply and fixed 150 mmAluminium, anodised, barrel tower bolts of extruded section and fixed. Length of bolt in mm |
| 50 | Supply and fixed 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed. Length of bolt in mm complete all as specified and as directed. |
| 51 | Supply and fixed Butt Hinges 100 mm long ,mild steel and fixed complete all as specified and as directed. |
| 52 | M & L for cement concrete 1:4:8 type C-2 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 75 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. |
| 53 | M & L for cement concrete 1:2:4 type B-1 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate 25 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. |
| 54 | Material and labour Non-skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white cement to match existing surface including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 55 | Material and labour Glazed ceramic tiles in vertical surface 450x350x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match existing surface including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 56 | Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 57 | Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 58 | M & L for preparation of new or previously untreated plastered/gypsum ceiling surfaces and applying two coat of oil bound distemper over a coat of suitable dry wall complete all as specified and as directed. |
| 59 | M & L for preparation of newly plastered surface of wall and applying two coats cement base paint over one coat of primer complete all as specified and as directed. |
| 60 | Preparation of newly plastered surfaces/boards on ceilings and applying three coats of white wash complete all as specified and as directed. |
| 61 | S & F 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete |
| 62 | S & F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Supply and fixed PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 64 | Supplying and fixing PVC (SWR) pipes 75 mm, single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 65 | Supply and fixed PVC (SWR) floor trap 75mm, plain with grating includ ing jointing with solvent cement complete all as specified and as directed. |
| 66 | S & F wash basins, vitreous china, white, flat back, size 630 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 67 | & F vitreous china urinals, bowl (flat back) without flushing rim of size 465 mm x 355 mm x 265 mm with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 68 | S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply and fixed Tubular towel rail, 20mmdia, D type, 60cm long between flanges, Aluminium anodised complete all as specified and as directed. |
| 70 | S & F brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 71 | S & F 10 litres cap PVC, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete |
| 72 | Supply and fixed 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 73 | S & F stainless steel soap dish weight not less than 150 gm each fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 74 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 75 | Supply and fixed Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 76 | Material and labour for hardcore (broken stone or boulders) of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 77 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified ,16mm dia complete all as specified and as directed. |
| 78 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified ,20 mm dia complete all as specified and as directed. |
| 79 | Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 80 | Supply and fixed bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed |
| 81 | Supply and fixed Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed |
| 82 | Supply and fixed 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated |
| 83 | Material and labour for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 84 | Supply and fixed PVC connections 15 mm size with PTMT nuts of length 450mm fixed complete all as specified and directed. |
| 85 | Supply and fixed mild steel small articles as holdfasts etc complete all as specified and directed. |
| 86 | Supply and fixed 75mm PVC (SWR) branch piece double (double y) equal unequal complete all as specified and directed |
| 87 | Supply and fixed 110mm PVC (SWR) branch piece single (single y) equal unequal complete all as specified and directed |
| 88 | Supply and fixed 75mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 89 | Supply and fixed 110mm PVC (SWR) Junction single (single T) equal unequal complete all as specified and directed |
| 90 | Supply and fixed 110mm PVC (SWR) vent cowl complete all as specified and directed |
| 91 | Supply and fixed 75mm PVC (SWR) vent cowl complete all as specified and directed |
| 92 | Supply and fixed 75mm PVC (SWR) bends any radius complete all as specified and directed |
| 93 | Supply and fixed 110mm PVC (SWR) WC connector bent type complete all as specified and directed |
| 94 | Material and labour for 75 mm thick PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in sub base of flooring/hardstanding etc complete all as specified and as directed. |
| 95 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey cement and no pigment and pointed in neat cement slurry in floors including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 96 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil for foundation etc or for shaft, wells, manholes etc complete all as specified and directed. |
| 97 | Material and labour for loose filling with broken stone or boulder aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, on open space complete all as specified and as directed. |
| 98 | Material and labour for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surface of walls finished fair and even complete all as specified and directed. |
| 99 | Material and labour pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 100 | M & L for concrete bed to drain pipes of internal diameter 150 mm, in cement concrete1:3:6 type C-2 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes complete all as specified and as directed. |
| 101 | Supply and fixed Reinforced concrete pipes 150mm , class NP3, laid and jointed complete with collars complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | Supply and fixed Reinforced concrete pipes 150mm , class NP3, laid and jointed complete with collars complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender