Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 2 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed. As approved by Engr-In-Charge |
| 3 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to either with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Engr-In-Charge(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 4 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 5 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items As approved by Engr-In-Charge :(a) Stainless Steel (304 Grade) Finished Butt HinAGEs 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 6 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and averaAGE width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinages 125mm - 3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 7 | M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed. |
| 8 | S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed as in repair complete all as specified. |
| 9 | Taking down aluminium door/ windows incl frames and complete fittings of area exc 1.50 sqm but n. exc 4 sqm complete. |
| 10 | M&L for Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etc complete all as specified and directed approved by Engr-In-Charge including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leafMake (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by Engr-In-Charge |
| 11 | Taking down aluminium door/ windows incl frames and complete fittings of area n exc 1.50 sqm complete. |
| 12 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauage 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified.Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by Engr-In-Charge |
| 13 | Dismantling of boarding, any description, fixed in any position with nails complete all as specified & directed by Engineer in Charge. |
| 14 | Powder coated 50 microns extruded aluminium frame for fixed type partition (Standard two panel pattern) made out of powder coated aluminium section of size 63.5 x 38.10 x 1.5mm, comprising of 5mm thick tinted glass inserted in and including necesary jointing cleats, rubber packing, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete incl taking down of existing partition with all fittings and fixtures all as specified and directed.Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by Engr-In-Charge |
| 15 | S & F in repair Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) as in repairs all as specified and directed.Make : Universal / Sandhu / Godrej (ISI Marked) of equavalent as approved by Engr-In-Charge |
| 16 | S & F in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate, bearing ISI mark complete including necessary welding work all as specified and as directed as approved by Engr-In-Charge. |
| 17 | S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed as approved by Engr-In-Charge. |
| 18 | Supply & fixing in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & length as required at site |
| 19 | Stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by Engr-In-Charge. |
| 20 | S & F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for disCharge pipe incl necessary packing, union complete all as specified.Make : Hindware/Parryware/Cera/Jaquar as approved by Engr-In-Charge |
| 21 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms). |
| 22 | S & F in repair 6mm thick of size 600x450 looking mirror fixed to wall with stainless steel plugs/connecter/ spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed as approved by Engr-In-Charge. |
| 23 | S & F in repair Double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified.Make : Universal / Sandhu / Godrej (ISI Marked) of equavalent as approved by Engr-In-Charge |
| 24 | S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and as directed. Universal / Sandhu / Godrej (ISI Marked) all as specified and directed approved by Engr-In-Charge |
| 25 | S&F in repairs steel rolling shutters, 1.00mm thickness of laths with out ball bearing,but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete. Note :- Rate including greasing, chanAGE of rod, lock, cover hood and other accessories as required as apprived by Engr-In-Charge |
| 26 | Dismantling wrought iron or mild steel work of any description not othervise provided for |
| 27 | S&F MS hollow rectangular/square/circular tubes/pipes of Fe 410-W (Gde E- 250) quality A as in frame work for roofs/rafters/purlins/chajjas/trusses/ columns/ struts etc and like similar items etc. complete all as specified |
| 28 | M&L for mild steel framed work as in doors or gates of angle Gde-Fe-290( Gde-E-165) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinAGEs or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 29 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete. |
| 30 | Dismantling of plain or corrugated steel/AC/PPGI sheets in roof coverings any type complete all as specified & directed by Engineer in Charge. |
| 31 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make : M/S Multicolor steel India Pvt Ltd , New Delhi / CRIL / INDIAN ISPAT / TATA BLUE SCOPE / JSW / KIRBY / PRESTAR or equivalent as approved by Engr-In-Charge |
| 32 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 33 | S&F ,10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I./M.S. as per specification and drawing, including Anodised aluminium snap grid frame work for false ceiling all as specified |
| 34 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified (colour/pattern as approved by Engr-In-Charge). |
| 35 | S & F for Rotational moulded polyethylene triple layer white colour water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arranAGEments for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 36 | S & F for Rotational moulded polyethylene triple layer white colour water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 37 | S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank including taking down tank cover complete all as specified. |
| 38 | Disconnecting existing tanks (Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank ), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 39 | M & L Cleaning and removing, Exc 250 Ltrs but not exc 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. |
| 40 | Disconnecting existing tanks (Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank ), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 41 | M & L Cleaning and removing, Exc 500 Ltrs but not exc 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. |
| 42 | S & F in repair Ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 15mm as in repairs complete all as specified and directed. |
| 43 | S & F in repair Ball valves high pressure of PTMT withepoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) fixed to 20mm dia of pipe complete all as specified and directed. |
| 44 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 all as directed and specified. Make : Cera / Parryware / Hindware or equivalent as approved by Engr-In-Charge |
| 45 | S & F in repair Vitreous china premium/1st quality wash down water closet pan floor mounting Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified.Make : Cera / Parryware/Hindware or equivalent as approved by Engr-In-Charge |
| 46 | S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete |
| 47 | S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. Make : Hindware / Parryware/Cera or equivalent as approved by Engr-In-Charge |
| 48 | S&F in repair vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed including taking down old one.Make : Hindware / Parryware/Cera or equivalent as approved by Engr-In-ChargeNote : The items for counter will be measured and paid separately. |
| 49 | S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete. |
| 50 | S & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. cera cat part no F8030104 or EquivalentMake : Hindware / Parryware/Cera or equivalent as approved by Engr-In-ChargeS & F brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. cera cat part no F8030104 or EquivalentMake : Hindware / Parryware/Cera or equivalent as approved by Engr-In-Charge |
| 51 | Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-Charge. as approved by Engr-In-Charge |
| 52 | S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar /Marc/Prima/Cera/Perryware or equivalent as approved by Engr-In-Charge. |
| 53 | S & F in repair Angular Stop Cock, CP, fency type with wall flanage, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified. cera cat part no F80402044 or EquivalentMake : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 54 | S&F in repairs 15mm bore Brass CP mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in Charge. Make for mixer : Jaquar/Marc/Prima/Cera/Perryware or equivalent as approved by Engr-In-Charge |
| 55 | Supplying and laying in repair of CPVC pipes 16mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-Charge. |
| 56 | Supplying and laying in repair of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-Charge. |
| 57 | Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc. Parryware T6010A1 cat part or Equivalent |
| 58 | Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc. Parryware cat part no T6909A1 or Equivalent |
| 59 | Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc. Parryware cat part no F5013104MB or EquivalentMake : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 60 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type.Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 61 | S & F in repair Bib taps, CP, fency type long nose with wall flanage screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified.Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 62 | S&F in repairs 15mm dia Bib tap (2 in 1 type) modle no BC-9876 of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed.Make : Jaquar /Hindware / Cera/ Prayag/Parryware or equivalent as approved by Engr-In-Charge |
| 63 | S&F in repairs Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanage, including brackets and fixed to walls, complete. |
| 64 | S&F in repairs Soap disc cera cat no F5013116ch CP fixed in position complete fixed as in repair in all respect all as specified.Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 65 | Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified. |
| 66 | Supply & fixed in repairs stainless steel sink, made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 67 | S & F in repair Stainless steel grating 150x150 mm size square / rounded as per required shaped with cockroach trap for floor trap fixed in position complete all as specified . |
| 68 | Supply and fixing PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and directed. |
| 69 | S & F PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet all as specified and directed. Prayag cat part no MC10001 or EquivalentMake:-Prayag/Parryware/Hindware |
| 70 | Demolition and breaking up drain PVC(SWR) pipes single socketed in any length with rubber joints all as specified |
| 71 | M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair. |
| 72 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete. |
| 73 | S&F in repairs PVC (SWR) bends 110 mm dia any radius all as specified and directed |
| 74 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete. |
| 75 | S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door all as specified and directed |
| 76 | S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequal with access door all as specified and directed |
| 77 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 78 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X350X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by Engr-In-Charge |
| 79 | M & L for Non-skid ceramic quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by Engr-In-Charge |
| 80 | M & L for Single Charge, stainfree, vitrified tiles, Premium (1st) quality straight edges, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified.Make : Johnson/ Kajaria/Somany/Orient or equivalent as approved by Engr-In-Charge |
| 81 | M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate used with M sand as in subbase of floors & finishing the surface even & smooth without using extra cement. |
| 82 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk |
| 83 | M & L for Granite of black / green / imperial red (colour as approved by Engr-In-Charge) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by Engr-In-Charge . |
| 84 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk |
| 85 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. |
| 86 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for |
| 87 | M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate used with M sand in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match |
| 88 | M & L plain cement concrete type C-2 (1:3:6) with 20mm garded stone aggregate used with M sand in plinth protection complete all as specified and directed. |
| 89 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) |
| 90 | Demolition for precast concrete articles |
| 91 | M&L Lime or sand stone Quoins, jamb stones, plain steps, parallel copings with throated edges, etc |
| 92 | Material & Labour for 40 mm thick jodhpur jaisalmer stone a jall in frame set in cement mortar 1:4. complete all as specified |
| 93 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 94 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-Charge. |
| 95 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses. |
| 96 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 97 | M & L for Cement plastering 15mm( thick in two layers -first layer 10mm thick with ready mix plaster and outer layer 5mm thick ready mix water proof plaster) on outer walls by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS- 2250-1981 and shall confirm 28 days compressive strength 10-15 MPA, bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPA complete all as specified and directed |
| 98 | M & L for rendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 99 | M & L for rendering 5 mm thick ready mix self curing plaster on ceilling by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 100 | Supply only integral liquid water proofing compound complete all as specified and directed.Make : Pidilite/Sika/Dr Fixit or equivalent as approved by Engr-In-Charge |
| 101 | M & L for Applying 3mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layers) for receiving painting complete all as specified and directed.Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty or equivalent as approved by Engr-In-Charge .Notes : (i) The prepared surface after wall putty, the contractor will inform to the AGE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the AGE as well as to the Engineer-in-Charge through site order. |
| 102 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Make of Exterior Wall Primer : Asian / BerAGEr / Nerolac [Best Quality] or equivalent as approved by Engr-In-Charge .Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) or equivalent as approved by Engr-In-Charge . |
| 103 | M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 104 | M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed. |
| 105 | S&F in repairs stainless steel plate rack of 600X750X250mm modle no FQ9206160 fixed to wall complete all as specified and directed by Enginer in charge as approved by accepting officer |
| 106 | S&F in repairs 1000 Liters Water Tank Insulation Cover Water Tank Cover Roof Top Thermal Water Tank Jacket | 3 Layer Cover to Protect from Hot and Cold Weather complete all as specified and directed by Enginer in charge as approved by accepting officer |
| 107 | S&F in repairs 500 Liters Water Tank Insulation Cover Water Tank Cover Roof Top Thermal Water Tank Jacket | 3 Layer Cover to Protect from Hot and Cold Weather complete all as specified and directed by Enginer in charge as approved by accepting officer |
| 108 | S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) all as specified and directed by Engineer-in-Charge and as approved by Engineer-in-Charge |
| 109 | M & L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and direction by the Engineer-in-Charge. |
| 110 | Material & Labour for 35mm thick precast cement concrete louvres and jallies type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), in cluding all mouldings and frame set in cement mortar 1:4. |
| 111 | S & F in repair Ball valves high pressure of PTMT withepoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) fixed to 15mm dia of pipe complete all as specified and directed. |
| 112 | S & F in repair Vitreous china premium/1st quality wash down water closet wall hung EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonaAGEe pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified.Make : Cera / Parryware/Hindware or equivalent as approved by Engr-In-Charge |
| 113 | Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 2 nos per leaf(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leafMake (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by Engr-In-Charge |
| 114 | E&M ITEMS :Taking down existing unserviceable point wiring of any description / type / size of light / fan /power /two way /bell etc on TW batten/ conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified & directed by Engr in Charge |
| 115 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. for stone concrete block or slab walls and making good, cutting exceeding 20cm girth |
| 116 | M & L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated FRLS 1100 Volts multistranded drawn through and including rigid PVC Casing and Capping as required at site and conduit accessories of suitable size medium grade in existing MS boxes duly cleaned as per existing site covered with new suitable sheet 3 mm thick for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly and making good surface including taking down of old unserviceable point wiring and accessories all as specified for One light/fan point controlled by one, one way switch 5 amps SP all as specified and directed. |
| 117 | All as per Sl item No. 03 here in before, but for One light point controlled by two 2 - way switch 5 amps, SP |
| 118 | All as per Sl item No. 03 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 119 | All as per Sl item No. 03 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 120 | All as per Sl item No. 03 here in before, but for One Bell point controlled by one, one way switch 5 amps, SP |
| 121 | All as per Sl item No. 03 here in before, but for using 4 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor PVC insulated cable as earth continuity conductor |
| 122 | M & L for Point wiring in concealed conduit complete all as specified with 1100 volts grade 1.5 sqmm PVC insulated FRLS multistraded copper conductor conforming to IS:694:1990 with ISI marking (For Phase, Neutral and Earth) in and including Non mettalic PVC rigid conduit medium grade with ISI mark of size 20 mm dia with all accessories concealed in wall / ceiling / roof etc, for fixing modular switches, sockets fan regulators etc of suitable modules and earth wire to be connected to common earth dolly and making good surface including taking down of old unserviceable point wiring and accessories all as specified and directed. |
| 123 | All as per Sl item No.09 here in before, but for One light point controlled by two 2 - way switch 5 amps, SP |
| 124 | All as per Sl item No.09 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 125 | All as per Sl item No.09 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 126 | All as per Sl item No.09 here in before, but for One Bell point controlled by one, bell push |
| 127 | All as per Sl item No.09 here in before, but for using 4 Sqmm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor PVC insulated cable as earth continuity conductor |
| 128 | S & F switch piano single pole flush type 5 amps, 230 volts. |
| 129 | S & F switch piano single pole flush type 15 amps, 230 volts. |
| 130 | S & F single pole Modular switch 1 way 6 Amps, 1 Module |
| 131 | S & F single pole Modular switch 1 way 16 Amps, 1 Module |
| 132 | S & F switch piano two way flush type 5 Amps capacity 230 volts. |
| 133 | S & F modular switch 2 way 6 Amps, 1 Module |
| 134 | S&F bell push 5 A flush type |
| 135 | S&F Modular Bell Push 6A, 1 Module |
| 136 | Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module |
| 137 | Supply and fix socket outlet modular type multipurpose 3/5 Pin, 6/16 amps, 230 volts combined 2 Module |
| 138 | Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts all as specified |
| 139 | Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5/15 amps, 230 volts all as specified |
| 140 | S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts all as specified. |
| 141 | S & F switch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush typewith complete all as specified. |
| 142 | S & F Modular ceiling fan regulator stepped socket size (modular) suitable to work on 230 volts complete all as specified, 2 Module |
| 143 | S & F S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd |
| 144 | S&F bell (buzzer / ding dong) working on 230 volts AC Supply |
| 145 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings |
| 146 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 147 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 148 | Supply and Fix in repair 4ft LED tube rods of 18/20/22 Watt complete including taking down all as specified and directed by Engg-in-Charge |
| 149 | Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 150 | Supply and fixing in repair round shape or square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 151 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 152 | S & F in repair LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed |
| 153 | Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.incl taking down old unserviceable MCB DB all as specified and directed by Engr-in-charge. |
| 154 | All as per Item No. 40 but for 40 Amps SP MCB |
| 155 | All as per item No. 40 but for 32 Amps SPN MCB |
| 156 | All as per item No. 40 but for 40 to 63 Amps SPN MCB |
| 157 | Supply and fixing in repair 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles andcurrent carrying capacity in the DB complete with connection testing and commissioning for TPN/FP 40 to 100 AMP |
| 158 | S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete incl taking down old unsv MCB DB all as specified and directed by Engineer-in -charge |
| 159 | All as per Sl item No. 46 here in before, but SPN 8 way DB |
| 160 | All as per Sl item No. 46 here in before but SPN 12 way DB |
| 161 | S & F in repair horizontal type TPN DB 4 way single door made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as directed by Engr-in-Charge. |
| 162 | S & F in repair Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) all as specified and directed |
| 163 | S&F MCCBs 415V,25KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface. |
| 164 | All as per Sl item No. 50 here in before, but 63 Amps, 10 KA |
| 165 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including taking down old unserviceable submain riwing complete all as specified and as directed. |
| 166 | All as per Sl item No. 52 but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductorNote :- Two runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit |
| 167 | All as per Item No. 52 but for submain wiring with 4 runs of single core 6 sqmm including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor.Note :- Four runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit |
| 168 | Supply and replace Fan condenser 2.5 mfd |
| 169 | Supply and replace fan condenser of 4.00 Mfd |
| 170 | Supply and replace split pins/lock pins for ceiling fans |
| 171 | Supply and replace MS Clamp with rubber bushes, bolts & nuts for ceiling fan along with lock pin all as specified |
| 172 | M & L for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any Ltrs capacity water heater (Geyser) complete all as specified. |
| 173 | Supply and replace Geyser element 2000 watts of any type or as per site requirement 240 V |
| 174 | Supply and replace Thermostat 240 V |
| 175 | Supply and replace Indicator bulb 230 V suitable for any make and colour. |
| 176 | Supply and replace PVC Cold/Hot water connection pipe 45 cms long 15 mm dia |
| 177 | M & L Rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size including repainting with white colour of any make, type, model incl transportation complete all as specified and directed by Engineer -in-charge. |
| 178 | All as per Item No. 64 but for rewinding of burnt Exhaust fan of 225 / 300mm sweep motor complete all as specified and directed by Engineer -in-charge. |
| 179 | M&L in repair deep grove ball bearings 6202 / 6201 suitable for ceiling fans / exhaust fans of any type all as per specified and directed |
| 180 | S&F in repair of ceiling fan / exhaust fan shaft as per the site requirement all as direted by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 181 | S&F in repair of ceiling fan / exhaust fan shaft as per the site requirement all as direted by Engineer-in-charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
