|
| 1 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 2 | White Vitreous China Wash basin size 550x400 mm with a pair of 15mm pillar Taps DSR 17.7.3 |
| 3 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 4 | Kitchen sink without drain board DSR 17.10.2 |
| 5 | 610x460 mm bowl depth 200 mm.DSR 17.10.2.2 |
| 6 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.DSR 17.15 |
| 7 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto1 Mtr long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16.A |
| 8 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 |
| 9 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 10 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19 |
| 11 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 12 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete DSR 17.20 |
| 13 | White solid plastic seat with lid DSR 17.20.1 |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.DSR 17.28 |
| 15 | Flexible Pipe DSR 17.28.2 |
| 16 | 32 mm dia DSR 17.28.2.1 |
| 17 | Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :DSR 17.60 |
| 18 | 100 mm inlet and 75 mm outlet DSR 17.60.2.1 |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall DSR 18.10 |
| 20 | 15 mm dia nominal bore DSR 18.10.1 |
| 21 | 20 mm dia nominal bore DSR 18.10.2 |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 23 | 15 mm nominal bore NSR |
| 24 | 20 mm nominal bore DSR 18.17.1A |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 26 | 15 mm nominal bore DSR 18.21.2.1 |
| 27 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 28 | 15 mm nominal bore DSR 18.46.1 |
| 29 | 20 mm nominal bore DSR 18.46.2 |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 31 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 32 | 15 mm nominal bore. DSR 18.49.1 |
| 33 | Providing and fixing C.P. brass long body bib cock 15 mm dia DSR 18.51.1 |
| 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points .DSR 18.53 |
| 35 | 15 mm nominal bore. DSR 18.53.1 |
| 36 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge DSR 18.53A |
| 37 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 38 | 15 mm nominal bore, DSR 18.62.1 |
| 39 | 20 mm nominal bore, DSR 18.62.2 |
| 40 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ |
| 41 | Providing and fixing of C.P. Nozzle Tap for Gardening |
| 42 | Conversion for OWC to EWC with 4\\" C.I. bend, 4\\" PVC collar 1 No 4\\" PVC pipe upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original condition complete in all respect with satisfaction of EIC. |
| 43 | Providing & fixing of C.P Cup heavy duty of approved make |
| 44 | Providing and fixing of C.P. Steel Grating Heavy (With hole or without hole) 100 mm dia, of approved make. |
| 45 | Providing and fixing of C.P. pillar cock of approved make |
| 46 | Providing and fixing of fitting for low level flushing cistern of approved make. |
| 47 | Provding .& fixing of Mirror of superior Glass ( of approved quility) complete with 6mm thick hard board ground fixed to wooden cleats steel studs complete in all respect |
| 48 | Providing and fixing of PVC Handle for L/Leval flushing Cistern of approved make |
| 49 | Providing and fixing of C.P.Waste complete in all respect |
| 50 | 32mm dia for WHB |
| 51 | 100 dia for Sink Waste |
| 52 | Providing and fixing of PVC tank cover |
| 53 | 500/300 ltr cap. |
| 54 | Providing and fixing of PVC Ball Cock for L/Leval flushing Cistern of approved make |
| 55 | Providing and fixing of CP/SS Long Bend /short bend for OWC |
| 56 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make . |
| 57 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 58 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 59 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 60 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 61 | Providing & Laying of UPVC pipe IS 4985 marked ,Pressour of 6 kg/cm2 including cutting,joining ,solvent and all necessary Fitting complete in all respect except excavation |
| 62 | 100 mm (110mm) |
| 63 | 75 mm (90mm) |
| 64 | Providing and fixing of PVC Tee size 100mm x75mm complete in all respect. |
| 65 | Providing and fixing GI Tank Nipple complete in all respect of approved make |
| 66 | Providing and fixixng of CP Brass Spindle (Heavy Duty) for bib taps and Pillar taps weight approx. 110 grms. |
| 67 | Providing and fixing of one piece EWC Seat cover make Hindware ,Model ELEMENT Complete in all respect or equivalent model of approved make to the satisfaction of EIC Please Enable Macros to View BoQ information |
