|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engr-in-charge. |
| 2 | M&L Vitrified ceramic tiles premium quality light shade 8-9 mm thick square /rectangular polished area of each tiles not exc 0.36 sqm in floors etc, set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 15 mm thick screed bed or bedding layer in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 3 | M&L Vitrified ceramic tiles premium quality light shade 8-9 mm thick square /rectangular polished area of each tiles not exc 0.36 sqm as in dado/skirting etc, set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 10 mm thick rendering in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 4 | M&L Vitrified ceramic tiles premium quality light shade 8-9 mm thick square /rectangular polished area of each tiles Exc 0.42 Sqm but not exc 1.00 sqm in floors etc, set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 15 mm thick screed bed or bedding layer in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 5 | M&L Vitrified ceramic tiles premium quality light shade 8-9 mm thick square /rectangular polished area of each tiles Exc 0.42 Sqm but not exc 1.00 sqm as in dado/skirting etc, set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 10 mm thick rendering in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 6 | M&L Premium quality glazed ceramic coloured tile of size 600mm x 300mm thickness 7mm on vertical surface, set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 10 mm thick rendering in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 7 | M&L non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the colour of tile over 15 mm thick screed bed or bedding layer in CM 1:4 for laying finishes, complete all as specified & directed by Engr-In-Charge. Note:- (i) Adhesive measured and paid separately. (ii) Epoxy grouting rate included in respective item. |
| 8 | Supply only adhesive for fixing of tiles in floor and wall as specified. |
| 9 | Dismantling of Stone slabs of any description or thickness in floors, plateform, apron etc laid bedded and pointed in any mortar including PCC bedding also removing rubbish material from building and thrown in low lying empty area at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L machine cut kota stone slab flooring 18-20 mm thick laid over 15mm thick 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed. Note:- Single piece slab to be provided in steps and stairs. |
| 11 | M&L machine cut kota stone slab 12-15 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed. Note:- Single piece slab to be provided in steps and stairs. |
| 12 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified & directed by Engr-In-Charge. |
| 13 | M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified & directed by Engr-In-Charge. |
| 14 | Taking down cement plaster from ceilings & brick walls including wall tiles / terrazzo / kota stone etc. any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-In-Charge. |
| 15 | Preparation of all surfaces should be clean and made free from dirt, oil, grease, concrete sealers or curing compounds using a wire brush or mopping. Dampen the surface with clean water. M&L for rendering 10-15 mm thick readymix plaster on all surfaces. |
| 16 | M&L for rendering 5 mm thick ready mix mortar on ceiling all as specified & directed by Engr-In-Charge. |
| 17 | M&L Preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over chalk whitening complete all as specified & directed by Engr-In-Charge. |
| 18 | Preparation of new plastered surfaces and applying two coats of white wash on ceiling as specified & directed by Engr-In-Charge. |
| 19 | Preparation of newly plastered surfaces of walls etc., and applying two coats of Acrylic exterior emulsion paint complete all as specified & directed by Engr-In-Charge. |
| 20 | S&F in repair vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. seat cover and ABS health faucet CP jet spray with 1.50 mtr long fexible tube including all fixing arrangement like P traps, PVC pipes and gratings etc. complete in all respect all as specified. |
| 21 | S&F in repair one piece/Single body PVC blow moulded conceled cistern, pneumatic type; capacity 9-10 litres, including chrome finish dual flush control plate, flushing pipe and fixing brackets complete assembled and fixed at site. |
| 22 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete in all respect all as specified. |
| 23 | S&F in repair 10 liter PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. complete in all respect all as specified. |
| 24 | S&F in repair of vitreous china premium / 1st quality wash basin, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings & waste pipe, 15mm fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with long screwed shanks and flynuts, screwed for iron pipe and chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement with PVC connections 15 mm size, 450 mm long with PTMT nuts and other end fixed complete all as specified & directed by Engr-In-Charge. |
| 25 | S&F in repair 15mm size PVC connection 600 mm long with PTMT nuts complete all as specified and directed by engineer-in-charge. |
| 26 | Taking up or down 15 mm bore tubing of any description and connections at any places, including cleaning complete all as specified and directed by Engr-In-Charge. |
| 27 | Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-In-Charge. |
| 28 | Taking up or down 20 mm bore tubing of any description and connections at any places, including cleaning complete all as specified and directed by Engr-In-Charge. |
| 29 | Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-In-Charge. |
| 30 | S&F in repair bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore as directed. |
| 31 | S&F in repair Pillar taps, fancy type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified |
| 32 | S&F in repair Stop valve/angle ball, cast copper aIIoy, chromium plated fancy type, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed |
| 33 | M&L for water proofing treatment to RCC sunken slab as specified below and as directed by Engineer-in-Charge:-(a) Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces.(b) Cleaning the surface with wire brush / coir brush, removing loose material like dust particles, dirt etc.(c) Creating fillet covering of 50 X 50 mm with polymer modified mortar on the junction of slab and wall(d) Apply first coat of two component modified polymer coating on the horizontal and vertical surface(e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating.(f) Apply second coating of two component modified polymer coating after 72 hrs.(g) Laying AAC block as per requirement.(h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mmg) Filling the gap between the wall opening and sanitary pipe with non shrink cementations grout.(k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Make : Dr. Fixit / Fosroc / BASF / STP.Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) WPC shall be measured and paid separately |
| 34 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as directed. |
| 35 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as directed. Please Enable Macros to View BoQ information |
