|
| 1 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviceable material from site complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed. |
| 4 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 5 | Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 6 | Material and labour for 10mm thick dubbing out plaster on irregular face of walls / ceiling and rough finished in cement mortar (1:3) including GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 7 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement in ceiling complete all as specified and directed. |
| 8 | Supply only liquid water proofing compound (WPC) complete all as specified and directed. |
| 9 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 10 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 11 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 12 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 13 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed. |
| 14 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint (Camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed. |
| 15 | Material and labour for writing letters or figures (Block, Roman, Italic or Indian) not exc. 30 cm high with synthetic enamel paint complete all as specified and directed. |
| 16 | Taking down chowkhats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 17 | Taking down chowkhats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 18 | Taking down shutters of any description n.exc. 1.00 Sqm each complete all as specified and as directed. |
| 19 | Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 Sqm each complete all as specified and directed. |
| 20 | Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 21 | Supply and fix 30mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 22 | Supply and fix 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to square (with plain, chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), and fitted to chowkats complete all as specified and directed. |
| 23 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed. |
| 24 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawing given in SSR Part-II 2020 complete all as specified and directed. |
| 25 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 26 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 27 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 28 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 29 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead/ aluminium bead / rubber bead in square n. exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed. |
| 30 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium/ rubber beads, nails etc in square/ rectangle exc 0.5 sqm in each pane complete all as specified and directed. |
| 31 | Supply and fix solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 32 | Supply and fix in repair 9mm thick pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination fixed to frame work complete all as specified and directed. |
| 33 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nut bolt or aluminium beads complete all as specified and directed. |
| 34 | Supply and fix in repair stainless steel 25mm dia curtain rod, fancy type with stainless steel side and end holders and stainless steel brackets fixed in brick /concrete wall with screws complete all as specified and directed. |
| 35 | Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 36 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 37 | Supply and fix in repair builder hardware for steel windows/ventilators like left/right handles, stays, latches and projected type stays etc. including required welding work or fixed with rivets/nut bolts as required complete all as specified and directed. |
| 38 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 39 | Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A including one shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 40 | Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165 quality-A including one shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 41 | Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including one shop coat of zinc chromate primer complete all as specified and directed. |
| 42 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed. |
| 43 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 44 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 45 | Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 46 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet complete all as specified and directed. |
| 47 | Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. |
| 48 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed. |
| 49 | Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 50 | Material and labour for moorum/ red bajri filling in floors or pavings including spreading levelling water and well ramming in layers not exc 15 cm thick complete all as specified and directed. |
| 51 | Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 52 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 53 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement including forming costruction joint 30mm deep x 10mm wide filled with sealing compound of group 'A' complete all as specified and directed. |
| 54 | Material and labour for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor and finished the surface fair and even complete all as specified and directed. |
| 55 | Dismantling of stone slabs and tiles laid dry of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 56 | Material and labour for re-laying cement concrete paver block of any size as in footpath, parks, lawns, drive ways or light traffic parking etc.including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Note- Serviceable paver block obtaintained from item No 55.00 shall be reused under this items. |
| 57 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 58 | Material and labour for providing, cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 59 | Material and labour for providing, cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate ) as in foundation, floors, sub base, paving, surface channels, drains and manholes etc complete all as specified and directed. |
| 60 | Extra for forming fair finished drain or channel 55 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed.Note:- Only inner girth shall be measured for payment. |
| 61 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 62 | Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 63 | Material and labour for glazed ceramic tiles of size 300x450x7-8 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 64 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and including dismantling of old unseviceable existing tank and removing from site complete all as specified and directed. |
| 65 | Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 66 | Supply and fix 15 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and directed. |
| 67 | Supply and fix 20 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and directed. |
| 68 | Supply and fix in repair 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 69 | Supply and fix in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 70 | Supply and fix in repair 15mm bore fancy type, chromium plated, long body bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 71 | Supply and fix in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling complete all as specified and directed. |
| 72 | Supply and fix in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flushing pipe complete all as specified and directed. |
| 73 | Supply and fix in repair vitreous china wash hand basin, white, of size 550mmx400mm fixed to granite/marble top slab, including cutting for and pinning in and 32 mm bore cast copper alloy chromium plated waste fittings and 32mm dia PVC waste pipe 800mm long including 15mm bore fancy type long body pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 74 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 75 | Dismantling of fencing wire mesh of chain link or any type including removing of debris from site complete all as specified and directed. |
| 76 | Dismantling (wood, steel or RCC) posts or struts embedded in concrete, brick work masonry etc. any section, including taking out embedded portion and making good disturbed ground including removing of debris from site complete all as specified and directed. |
| 77 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in soft/loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing surplus soil from site complete all as specified and directed. |
| 78 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation of post holes, filling and mass concrete complete all as specified and directed. |
| 79 | Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of zinc chromate primer complete all as specified and directed. |
| 80 | Material and labour for mild steel round bars 10 mm dia as in tie bar of chain link fencing conforming to Fe-410-W (Gde-E-250) quality-A including one shop coat of zinc chromate primer complete all as specified and directed. |
| 81 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n. exc 5cm long complete all as specified and directed. |
| 82 | Material and labour for mild steel round bars 10 mm dia as in tie bar of chain link fencing conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 83 | Supply only chain link MS galvanisd fencing of any size complete all as specified and directed. Note:- Weight of chain link fence shall be ascertained through BOO as directed by GE. |
| 84 | Fixing only chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 85 | Supply and fix in repair galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note: - Each line wire to be measured for payment. |
| 86 | Greasing, oiling and overhauling of existing steel rolling shutters of any description and in any position up to 10meter height with header cover box including replacement of damaged curtain laths, lock plate, guide channel, cover etc with suitable locking arrangement and gear box of any description including required repair parts for smooth and proper fuctioning of steel rolling shutters complete all as specified and directed.and directed.Note:-Parts i.e. ball bearing and safety lever locks shall be measured and paid seperately under respective items as supply only. |
| 87 | Supply only safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 88 | Supply only ball bearing for rolling shutters complete all as specified and directed. |
| 89 | Material and labour for cutting out cracks to V-section in existing roof or terracing, cleaning and filling solidly with hot mixture of bitumen and clean dry sand (1:1) (by weight) complete all as specified and directed. |
| 90 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed. |
| 91 | Complete removal of existing roof treatment in any layers and disposal of debris from site complete all as specified and directed.Notes: - (a) The rates are inclusive of removal for any type of old water proofing treatement over main RCC slab.(b) Bidders are advised to visit the site and esure about site condition before quoting their rates.(c) Demolition of PCC/ taking down plaster if any shall be measured and paid saparately under respective items. |
| 92 | Demolition of cement concrete (un-reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, fins, facia, chajjas and similar suspended work including removal of debris from site complete all as specified and directed. |
| 93 | Material and labour for PCC (1:2:4) type B0 (using 12.50 mm graded stone aggregate) mixed with water proofing compound @ 200 ml per bag of cement (50 Kg) or as per manufacturer instruction as in levelling course to match undulation of roof, in coving, roof kerbs including benching or mud stops, rounded or chamfered on edges etc including necessary form work and finished the rough surface complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 94 | Material and labour for 5mm thick rendering in cement mortar (1:3) with using water proofing coumpound (WPC) @ 200 ml per bag of cement or as per manufacturers instruction on roof top while concrete is green to become integrated part of concrete padding layer and finish the surfaces even and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 95 | Material and labour for water proofing treatment to RCC roof surface with fiber reinforced elastomeric liquid applied waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers and upon curing forms a thick, seamless, durable membrane using product Smart Care Damp Proof Ultra (Product code- 5698) of Asian Paints Ltd or equivalent brand of makes M/s STP Ltd, M/s IWL India Ltd, M/s Tiki Tar Danosa (India) pvt ltd, M/s FOSROC Chemicals with the following course of treatment/specifications from bottom to top :-(a) Applying priming coat Smart Care Damp Proof Ultra as self priming with 33% water dilution with roller/ brush and allow to dry for 4-6 hours or as per manufacturer's instruction.(b) Applying first coat of water proofing Smart Care Damp Proof Ultra without dilution with roller and allow to dry for 4-6 hours or as per manufacturer's instruction.(c) Finally applying second coat of water proofing Smart Care Damp Proof Ultra without dilution with roller and allow to dry for 4-6 hours or as per manufacturer's instruction.Note:- The work shall be executed only through authorised applicator of manufacturer as approved by GE. Please Enable Macros to View BoQ information |
