|
| 1 | Comprehensive Maintenance of Sewage Treatment Plant of capacity 200 KLD installed at Shivaji Marg including all consumable materials, repairing, replacement of any part of STP complete all as specified and as directed.Notes:- The comprehensive mantainence of complete STP shall be included in the rates provided by the contractor, no extra payment shall be provided to the contractor for any repair and replacement of unserviceable items, running mantainence of STP or overhauling of motor and pump required and any Butterfly valve, MCCB, MCB, relay, blower fan, blower servicing, oil replacement, and any items of STP plant should be replace without any extra cost. it will be the contractors sole responsibility to mantain the STP in working condition. If the contractor fails to keep the STP in working condition, recovery of Rs.5000/- per day per installation will be done and after a notice of 10 days if the STP is not made to order then the contract will be cancelled and performance security forfeited. |
| 2 | Comprehensive Maintenance of Sewage Treatment Plant of capacity 300 KLD installed at MCTE including all consumable materials, repairing, replacement of any part of STP all as specified and as directed.Notes:- The comprehensive mantainence of complete STP shall be included in the rates provided by the contractor, no extra payment shall be provided to the contractor for any repair and replacement of unserviceable items, running mantainence of STP or overhauling of motor and pump required and any Butterfly valve, MCCB, MCB, relay, blower fan, blower servicing, oil replacement, and any items of STP plant should be replace without any extra cost. it will be the contractors sole responsibility to mantain the STP in working condition. If the contractor fails to keep the STP in working condition, recovery of Rs.5000/- per day per installation will be done and after a notice of 10 days if the STP is not made to order then the contract will be cancelled and performance security forfeited. |
| 3 | Carrying samples for Testing of treated water of STP, submission of detailed test report to the office of the Engineer-in-charge and testing in NABL approved laboratory as approved by GE.Details are as under :- (a) Carrying out minimum essential testing of water as per IS 10500 of 1991 mandatory for chemicals, colour, odour, PH value, TSS, BOD, COD, Total residual chlorine, total Nitrogen, Sulphate, oil and grease, Ammonical Nitrogen (NH3-N) and Bacteriological total coliform organisms per 100 ml (MPN) and E colliie in 100 ml. |
| 4 | Testing of Sewage water as per relevant IS of STP , submission of detailed test report to the office of the Engineer-in-charge and testing in NABL approved laboratory as approved by GEDetails are as under :-(a) Carrying out minimum essential testing of sewage water as per revlevant IS mandatory for chemical, odour, PH Value, TSS, BOD,COD total nitrogen, sulphate, oil and grease ammonical Nitrogen (NH3-N) and Bacteriological total collifrom organisms and other charaterstics as per relevant IS of sewage water.Notes :- Rate quoted shall deemed to be included for :-(i) Cost of sterilised bottle as required(ii) transportation charges for collection of sample |
| 5 | Repair and overhauling incl Dismantling/taking down all electrical and mechanical connection of twin lobe blowers model No (Make:- Everest) capacity, pressure 0.37 kg/cm and servicing hole body, change gear oil/lubricant and V belt,overhauling of the same including refixing and testing complete all as specified and directed. Note:- spare parts and gera oil/lubricant shall be measured and paid including supply of following materials: (i) servo gear oil super 90, Make indian oil(ii) Bearing as per sample for air blowers model No -610FS (Make:- Everest)(iii) Gasket kit as per sample for air blowers model No -610FS (Make:- Everest) (iv) Oil sealas per sample for air blowers model No -610FS (Make:- Everest)(v) V-belt as per sample for air blowers model No -610FS (Make:- Everest) |
| 6 | Periodical Cleaning of Sewage and removing settled down Sewage sludge cum mud/ De-Silting etc STP Equalization tank including all equpment painting work done by the contrector in every months complete all as specified and as directed. |
| 7 | Notes for item 6 :- Cleaning shall be carried out by the following methods:-(i) Cleaning inner surface of tank by scraping with steel wire brush and removing mud & sludge collected inside the tanks manually at a distance not exceeding 50 Mtrs.(ii) Washing with clean water & bleaching powder mixture thourouly complete tank internally and removal of left out sludge, if any, at site to s distance not exceeding 50 Mtrs. Rate quoted shall include the aspects :- (i) Diesel Driven Pump Set/ elctric pump set of appropriate capacity not less than 5/7.5 HP with operator including necessary POL required at site for De-Watering of Sewage septic water including PVC heavy duty flexible hose pipe for suction and delivery purposes.(ii) Tractor mounted storage tank of appropriate capacity not less than 1 KL with driver directly collected from the soak well and disposing the same to the location where approved by Engr-in-charge(iii) Labour element and T&P required for removal of settled down sewage sludge/ mud inside the sewage tank for scooping out from inside and below the septic/staining sewage water inside the well and lifting the same and deposited on top and near by the sewage tank where directed and further to removal the same where approved by the Engr-in-charge.(iv) Appropriate qty of Phenyle required at site for Sterilization of sewage sludge being collected in the Sewage tank as directed. (v) Necessary Oxygen Mask, Gloves, Gum Boot and all other safety aspects and including necessary Phawda, Steel Bucket, Manila rope etc. required at site as directed. |
| 8 | Material and labour for cleaning of MBBR tanks, Tube settler Tank, treated water tank, filter feed tank, chlorine contact tank and sludge drying beds from STP thoroughly by removing mud, grits etc complete all as specified and as directed. The periodic painting i.e. cement based paint on RCC/ brick structures and synthetic enamel paint on all MS Parts incl. piping of all parts of STP is included in the rate quoted. This item to be exceuted at the commencement of work and to be completed within one month.Notes :-(a) Cleaning inner surface of tank complete by scraping with steel wire brush and removing mud and sludge collected inside the tank manually at a distance/ location as directed by Engr-in-Charge. (b) Washing with clean water and bleaching powder complete tank internally and removel of left out sludge if any at site at a distance/ location as directed by Engr-in-Charge. |
| 9 | Supply only DWPE for hypo dosing sytem in tube settler for 200 & 300 KLD STP Plant at MAP Kodariya and Shivaji Marg complete all as specified and as directed. |
| 10 | Supply only Sodium Hypo Chloride having 10% Chlorine content for 200 & 300 KLD STP Plant at MAP Kodariya and Shivaji Marg complete all as specified and as directed. |
| 11 | Supply only Bio culture to be fed in STPs every month for better functioning and working of STP for 200 & 300 KLD STP Plant at MAP Kodariya and Shivaji Marg complete all as specified and as directed. |
| 12 | M&L for taking out carbon filter from ACF tank and replacing with fresh carbon/ anthracite chemically treated incl servicing. |
| 13 | M&L for taking out sand bed from cylinderical DMF tank and replacing the same with chemically treated filter beds viz. |
| 14 | Material for replacement of quartz silica sand 32-64 grade complete all as specified and directed by Engr-in-charge. |
| 15 | Material for replacement of quartz silica sand 16-32 grade complete all as specified and directed by Engr-in-charge. |
| 16 | Material for replacement of quartz silica sand 8-16 grade complete all as specified and directed by Engr-in-charge. |
| 17 | Material for replacement of quartz silica sand 4-8 grade complete all as specified and directed by Engr-in-charge. |
| 18 | Material for replacement of activated carbon IV 1000 complete all as specified and directed by Engr-in-charge. |
| 19 | Taking up or down steel tubing size 40mm and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 20 | Taking up or down steel tubing size 25mm and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 21 | Taking up or down steel tubing size 20mm and connections, including cleaning for refixing or removal to store complete all as specified and directed |
| 22 | Taking up or down steel tubing size 15mm and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 23 | Supply and laying 40mm dia GI water tubing medium grade ISI marked incl all types of fittings and accessories fixing/ laying on wall, floor and ceiling etc, complete all as specified and directed. |
| 24 | Supply and laying 25mm dia GI water tubing medium grade ISI marked incl all types of fittings and accessories fixing/ laying on wall, floor and ceiling etc, complete all as specified and directed. |
| 25 | Supply and laying 20mm dia GI water tubing medium grade ISI marked incl all types of fittings and accessories fixing/ laying on wall, floor and ceiling etc, complete all as specified and directed. |
| 26 | Supply and laying 15mm dia GI water tubing medium grade ISI marked incl all types of fittings and accessories fixing/ laying on wall, floor and ceiling etc, complete all as specified and directed. |
| 27 | Excavation in trenches in Soft/ loose soil not exceeding 1.5 mtr width and not exc 1.5 mtr deep for laying of pipe etc and getting out complete all as specified and directed. |
| 28 | Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick hard soil complete all as specified and directed. |
| 29 | Removing surplus soil to a distance 150mtr and deposit where directed at alevel not exceeding 1.5 mtr above the starting point, complete all as specified and directed. |
| 30 | M&L for cutting existing road/ hard standing not exc 45 x 45 cm in wide and depth getting out excavated material for laying tubes, returning refilling and well ramming watering finish surface 10 cm from top using PCC 1:3:6 including removal of surpluse soil, complete all as specified and directed. |
| 31 | M&L for construction of PCC 1:4:8 type D-2 using 40mm graded stone agragate as in foundation, mars filling and staging of MS tank/ PVC storage tank box repair to floor, path incl necessary form work and fair finishing without using extra cement complete all as specified and directed. |
| 32 | S&F dozing pump for chlorination, max flow rate 4-1000LPH, Electromagnetic type, 230 volts 50 HZ including taking down old unsv complete all as specified and directed. |
| 33 | M&L for rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) of capacity 500 ltrs, hoisted and fixed in old/ new position incl taking down old unsv complete all as specified and directed. |
| 34 | M&L for Earthing with galvanised steel earth plate electrode 60 x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including taking down old earthing all as specified or indicated including testing on completion and submission of test report by contractor complete all as specified and directed. |
| 35 | S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA including taking down old unsv complete all as specified and directed. |
| 36 | S&F in replacement MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA including taking down old unsv complete all as specified and directed. |
| 37 | Supply and fixing of 200 watt led flood light Graphite grey powder coated; matt finished pressure die cast aluminium housing designed to act as heat sink for efficient dissipation of heat, Heat resistant toughened glass provided with silicon gasket for efficient Ingress protection, LEDs are provided with secondary polycarbonate lens optics to get optimum optical performance, Constant current LED driver used is specially designed to have built-in surge voltage, open/ short circuit protections. Luminaire is provided with a MS mounting bracket fixed on pressure die-cast aluminium housing for aiming adjustment of 200 watt led flood light with high power led lumnious efficacy 120 lm/watt, correlated color temperature 5665K±355K, luminous flux 24000 lm, CRI >70, Die cast aluminum body with toughned glass along with pennut lens, Impact resistence 08, Ingress protection >66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips only, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 5 years and same should be prodused to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed. |
| 38 | All as per Srl item No.40.00 above but 120 Watt. |
| 39 | S&F in repair 4 pole power contractor type MCX of capacity 25 Amps conforms To IS/ IECN 60947-4-1 & IEC 60947-4-1, complete all as specified and directed. |
| 40 | S&F in repair 4 pole power contractor type MCX of capacity 32 Amps conforms To IS/ IECN 60947-4-1 & IEC 60947-4-1, complete all as specified and directed. |
| 41 | S&F in repair 4 pole power contractor type MCX of capacity 40 Amps conforms To IS/ IECN 60947-4-1 & IEC 60947-4-1, complete all as specified and directed. |
| 42 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal, anti rust/ anti crossive paint for suction/ discharge pipe of AC plant and panel board etc in different colour as approved by complete all as specified and directed. |
| 43 | Periodical Maintenance of pumps of capacity 5/2.5 Hp including greasing/ oiling, shaft, bearing and during the maintenance any parts required to be supply by contractor for smooth functioning of the Pump complete all as specified and directed. Please Enable Macros to View BoQ information |
