|
| 1 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- ( 250 Litres ) Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport (b) Media 11054 No. Vessel with 20 nb Multiport Valve (b) Media 11054 No. Vessel with 20 nb Multiport Valve (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.Low Pressure Switch - 1 No., Level Switch - 1 No. &(f) Flow Meter - 1 No. 20 Filter with Housing - 1 No.,Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 2 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work |
| 3 | Supply and delivery of open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due toall causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rodas per IS 613/1984 with ISI mark. The pump suitable for+ installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter forabove 20 HP starting and for continuous operation. |
| 4 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for nextStandard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately |
| 5 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gagues upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and train run for 10 days |
| 6 | Supply and errection of CCTV in the following items. |
| 7 | Armoured cat-6 cable (PWD SOR page no:153) |
| 8 | POE switch for camera - 8 port (PWD SOR page no;154) |
| 9 | Hard disk for NVR 6 TB (PWD SOR page no;155) |
| 10 | Net work video record for CCTV 8 Channel - 1 SATA 1 No Hard disk (PWD SOR page no;154) |
| 11 | CCTV camera |
| 12 | Rack with Accessories 6U Rack (PWD SOR page no;155) |
| 13 | I/O SOKET RJ 45 (PWD SOR page no;155) |
| 14 | I/O SOKET RJ 11 (PWD SOR page no;155) |
| 15 | 29\\" LED TV |
| 16 | Supply and Delivery of fly catcher machine including all taxes and transportation charges ,etc complete |
| 17 | Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 18 | Supply and Delivery of following Cooking Vessels and equipments for Amma Unavagam including cost and conveyance of all materials and all labour charges etc., complete |
| 19 | Instant Rice Wet Grinder 2 HP, Stainless Steel box type, single phase, capacity 80-100 kg / hr, Blade size 7\\" inch attached with gate volved and water hose connection |
| 20 | Aluminum Cutrim Sauce Pan |
| 21 | SS Drum L.W |
| 22 | SS Anda Set |
| 23 | Water Jug |
| 24 | SS Anda with Handle 18 G |
| 25 | Pongal Karandi |
| 26 | SS Karandi PC |
| 27 | SS Rice Collandar |
| 28 | Lighter |
| 29 | Pressure Rice Cooker (16 litre) |
| 30 | Pressure Cooker ( 5.5 Litre) |
| 31 | Electrical Water Heater |
| 32 | 20 W 4 Feet LED Tubelight |
| 33 | SS ThuKu Special |
| 34 | SS Sauce Pan |
| 35 | Aruva Manai |
| 36 | Plastic Mug |
| 37 | Plastic Basin (70 Litre) |
| 38 | Plastic Stainer |
| 39 | Plastic Ampa Tea vadi |
| 40 | SS cash box |
| 41 | Aluminum kai vadi |
| 42 | Aluminum Special tawa |
| 43 | Wall Mounted fan 450 mm |
| 44 | 18 W LED 3000 K Square type recessed fitting |
| 45 | Ceilling Fan high speed |
| 46 | SS Plates Please Enable Macros to View BoQ information |
