|
| 1 | Supply and Work Part |
| 2 | Supply of one set 120 V, 400 AH Battery Bank consisting of 60 nos. 2 Volt/400 Ah Plante cell, high discharge type in specially moulded transparent SN container complete with Tubular positive plates, pasted negative plates, vent plugs, insulators, lead plated copper connectors, nuts, bolts washers etc. dry & uncharged as per IS 1652-2013. Along with supply of all Accessories, Spares, Standary Maintainance Accessories, Installation, testing and commissioning, etc. Including Buy Back of Old Battery Bank. |
| 3 | Supply of Battery Bank |
| 4 | Supply of one set 120 V, 400 AH Battery Bank consisting of 60 nos. 2 Volt/400 Ah Plante cell, high discharge type in specially moulded transparent SN container complete with Tubular positive plates, pasted negative plates, vent plugs, insulators, lead plated copper connectors, nuts, bolts washers etc. dry & uncharged as per IS 1652-2013.The above Battery Bank will be supplied along with the following: a) Steel stand: Non-Seismic MS Steel Stand having two coats of sulphuric acid corrosion resistant polyurethane lacquer along with cell number sticker, suitable stand insulator. b) Required Sulphuric Acid sufficient for first filling of the above battery (including 10% acid spare) in non-returnable polyethylene Jerry Cans suitably and safely packed.c) Inter row & Inter Tier connector. |
| 5 | Supply of Spares |
| 6 | i) Supply of Spare Lead Acid, Plante Type Battery Cells of same specification as stated above along with Bolts, Nuts and washer. |
| 7 | ii) Spare Inter cell connectors |
| 8 | Supply of Standard Maintenance Accessories |
| 9 | i) HYDROMETER TYPE T2B, 1.00-1.300, THIMSON |
| 10 | ii) DIGITAL MULTIMETER, MODEL-RISH MAX10 |
| 11 | iii) THERMOMETER - CHEMICAL / GLASS |
| 12 | iv) TP HOLDER FOR ACCESSORIES |
| 13 | v) INSULATED SPANNER 1/4\\" |
| 14 | vi) RUBBER SYRINGES 10 OZ |
| 15 | vii) PLASTIC FUNNEL |
| 16 | viii) RUBBER SYPHONES 1/2\\" DIA X 2 MTRS. LONG |
| 17 | ix) PVC APRON SIZE 28\\" X 48” |
| 18 | x) NATURAL LATEX RUBBER GLOVES 14 \\" 120 GRM |
| 19 | xi) ACID RESISTING JUG |
| 20 | xii) PVC GUMBOOT NO.8 |
| 21 | Service Part |
| 22 | Dismantling of Existing Battery Bank along with other works as stated under 4-C of APGCL Bid Document. |
| 23 | Installation Testing and Commissioning of Newly supplied Battery Bank along with all other works as stated in Section IV-C of APGCL Tender Doc. |
| 24 | Buy-Back of Existing Battery Bank |
| 25 | Type: Lead Acid, Plante Type, Make: Exide, Model: YKP33 (P400P HDP),Capacity: 120 V, 400 Ah, Please Enable Macros to View BoQ information |
